CZ
Shop by:
Products
CZ 457 American Combo, 22LR & 17HMR
The American Combo ships with both 22 LR and 17 HMR barrel sets and like all 457s it can be easily swapped between those in minutes. The classic American-style rimfire rifle, this gorgeous 457 has a 24.8” barrel with no sights and is meant to be topped with a scope. Its Turkish walnut stock has a high, flat comb and a classic checkering pattern. Like all of our 457s, it has an 11mm dovetail milled into the top of its receiver for attaching scope ringmounts. If we were to pick one thing that our previous rimfire platforms were lacking, it was an American-style push-to-fire safety — something Hunter’s Education instructors and 4-H shooting coaches have begged us to incorporate for years. Though that was the most obvious change, we also took the opportunity to tweak a load of small things at the same time. In addition to the receiver-mounted, push-to-fire safety, we chopped almost an inch of length from the action and slab-sided it to reduce its footprint and weight. The stamped bottom metal of the 455 is gone, swapped for a classy two-piece interlocking system. To make scope fitment easier, we ditched the 90° bolt rotation in favor of 60°, allowing for larger ocular bell diameters with lower ring heights. To top it all off, the 457 now features a trigger adjustable for weight, creep and over-travel. With the exact same swappable barrel system as the 455 and the same reliable polymer magazine system, the 457 is without a doubt the best rimfire platform we’ve ever fielded. |
02320
In stock
$679.95
CZ 1012 Shotgun, 12 Gauge 28" - Bronze Turkish Walnut
The latest evolution in CZ's semi-automatic shotgun line, the 1012 uses a gas-less inertia operating system. Instead of redirecting gas from the barrel to run the action, the 1012 uses a spring within the bolt to store energy during the shotgun’s recoil, spending this energy a split second later to rotate and unlock the twin lugs from the barrel extension and withdraw the spent shell. The major advantage of an inertia system is the less stringent maintenance schedule. Unlike gas guns that need periodic cleaning of the piston and magazine tube, the 1012’s needs are vastly fewer. During the testing, CZ pushed 1012s to 5,000 rounds without a drop of oil or cleaning of any sort, while experiencing zero parts breakage or malfunctions. In normal field use, the occasional cleaning and oiling should be more than enough. Additionally, the gas-less system itself is tuned to run a wider variety of shells — from light-recoiling target loads up to the smoking hot 3″ magnums currently on the market. That means the 1012 will readily digest the vast majority of shotshells on the market. Features a 8mm flat vent rib with a 14 1/2" length of pull. |
06353
In stock
$639.95
CZ 1012 Shotgun, 12 Gauge 28" - Turkish Walnut
The latest evolution in our semi-automatic shotgun line, the 1012 uses a gas-less inertia operating system. Instead of redirecting gas from the barrel to run the action, the 1012 uses a spring within the bolt to store energy during the shotgun’s recoil, spending this energy a split second later to rotate and unlock the twin lugs from the barrel extension and withdraw the spent shell. The major advantage of an inertia system is the less stringent maintenance schedule. Unlike gas guns that need periodic cleaning of the piston and magazine tube, the 1012’s needs are vastly fewer. During our testing, we pushed 1012s to 5,000 rounds without a drop of oil or cleaning of any sort, while experiencing zero parts breakage or malfunctions. In normal field use, the occasional cleaning and oiling should be more than enough. Additionally, the gas-less system itself is tuned to run a wider variety of shells — from light-recoiling target loads up to the smoking hot 3″ magnums currently on the market. 28" Barrel, 12GA with a 4 + 1 capacity. |
06350
In stock
$639.99
CZ 457 American, 22LR
The classic American-style rimfire rifle, this gorgeous 457 has a 24.8” barrel with no sights and is meant to be topped with a scope. Its Turkish walnut stock has a high, flat comb and a classic checkering pattern. Like all of our 457s, it has an 11mm dovetail milled into the top of its receiver for attaching scope ringmounts. If we were to pick one thing that our previous rimfire platforms were lacking, it was an American-style push-to-fire safety — something Hunter’s Education instructors and 4-H shooting coaches have begged us to incorporate for years. Though that was the most obvious change, we also took the opportunity to tweak a load of small things at the same time. In addition to the receiver-mounted, push-to-fire safety, we chopped almost an inch of length from the action and slab-sided it to reduce its footprint and weight. The stamped bottom metal of the 455 is gone, swapped for a classy two-piece interlocking system. To make scope fitment easier, we ditched the 90° bolt rotation in favor of 60°, allowing for larger ocular bell diameters with lower ring heights. To top it all off, the 457 now features a trigger adjustable for weight, creep and over-travel. With the exact same swappable barrel system as the 455 and the same reliable polymer magazine system, the 457 is without a doubt the best rimfire platform we’ve ever fielded. |
02310
In stock
$569.95
CZ Drake Shotgun, 12 Gauge - 28"
The Drake is an over/under shotgun that uses the same CNCed action and internals as our other shotguns. It features extractor operation, single selectable trigger, mid-rib delete and laser-cut checkering. Included is a set of 5 flush interchangeable chokes. It also features a Turkish Walnut stock with pistol grip, and 28 in barrel. Accepts max shell lengths of 3 in.
|
06092
In stock
$669.95
CZ Drake Shotgun, 20 Gauge - 28"
The Drake is an over/under shotgun that uses the same CNCed action and internals as our other shotguns. It features extractor operation, single selectable trigger, mid-rib delete and laser-cut checkering. Included is a set of 5 flush interchangeable chokes. It also features a Turkish Walnut stock with pistol grip, and 28 in barrel. Accepts max shell lengths of 3 in.
|
06093
In stock
$669.95
CZ 1012 Shotgun, 12 Gauge 28" - Gray Turkish Walnut
The latest evolution in CZ's semi-automatic shotgun line, the 1012 uses a gas-less inertia operating system. Instead of redirecting gas from the barrel to run the action, the 1012 uses a spring within the bolt to store energy during the shotgun’s recoil, spending this energy a split second later to rotate and unlock the twin lugs from the barrel extension and withdraw the spent shell. The major advantage of an inertia system is the less stringent maintenance schedule. Unlike gas guns that need periodic cleaning of the piston and magazine tube, the 1012’s needs are vastly fewer. During the testing, CZ pushed 1012s to 5,000 rounds without a drop of oil or cleaning of any sort, while experiencing zero parts breakage or malfunctions. In normal field use, the occasional cleaning and oiling should be more than enough. Additionally, the gas-less system itself is tuned to run a wider variety of shells — from light-recoiling target loads up to the smoking hot 3″ magnums currently on the market. That means the 1012 will readily digest the vast majority of shotshells on the market. Features a 8mm flat vent rib with a 14 1/2" length of pull. |
06354
Out of stock
CZ 457 American Synthetic SR, 22LR
This variant of our 457 American sports a newly-designed synthetic stock that borrows ergonomics and styling cues from our 557 American Synthetic. That synthetic stock, paired with the 457’s nitride finish, makes the rifle near impervious to the elements. 1/2×28 threads and our especially tight chamber tolerances make this rifle an ideal suppressor host. Not equipped with sights, this rifle has 11mm dovetails milled directly into the CNCed billet action for the solid mounting of rails or rings. The cold hammer forged barrel, fully adjustable trigger, push-to-fire safety and interchangeable barrel system all add up to equal a rifle that will last generations. |
02313
Out of stock
CZ Bren 2 MS Carbine 16.5", 5.56
Based on the select-fire Bren 2, this handy rifle operates via a short-stroke gas piston system with a return spring contained within the action itself. Without the need for a buffer tube, it features a folding, adjustable stock. At 35.6 inches long, folding that stock brings its length down to just 28 inches making it much easier to transport or store. A true lightweight, the Bren 2 has an aluminum upper and a lower made of carbon fiber composite. The 'Ms' designation means that it employs a modular forend that can be swapped to different lengths or styles based on user preference/need. Its non-reciprocating charging handle stays stowed in the forward position until it is needed and is swappable from side to side. An AR-style bolt catch/release system is mirrored on both sides of the firearm, as well as a catch/release nestled into the front of the trigger guard. The magazine release and safety are also ambidextrous. |
08610
Out of stock
CZ Bren 2 MS Pistol 11", 5.56
The next generation of the Bren, the Bren 2 Ms makes first landfall in the US in pistol form with multiple barrel lengths and two chamberings. Whereas the 805 Bren was designed to a specific set of requirements set out by the Czech military, the Bren 2 is a clean-sheet design. With a bevy of changes, the most noticeable is sure to be the strict weight-loss regimen that the Bren 2 has undergone. With a trimmed-down aluminum receiver and a lower made from carbon fiber-reinforced polymer, the result is a robust but substantially lighter gun. Gone is the reciprocating charging handle, replaced with one that stays stowed in the forward position until it is needed. Swappable from side to side, it does double duty as a forward assist. Also added is an AR-style bolt catch/release system that is mirrored on both sides of the firearm, as well as a catch/release nestled into the front of the trigger guard. The magazine release and safety are also ambidextrous and located in very familiar locations for anyone versed in the AR platform. In pistol form, the Bren 2 Ms comes with a flush rear plate that has the provision for attaching a AR-style buffer tube for the installation of an arm brace, cheek rest or similar pistol stabilizing device. For those who wish to SBR, a Carbine buffer tube and stock can be installed or the entire rear plate can be removed and replaced with a factory folding/adjustable stock. |
91451
Out of stock
CZ Bren 2 MS Pistol 8", 5.56
The next generation of the Bren, the Bren 2 Ms makes first landfall in the US in pistol form with multiple barrel lengths and two chamberings. Whereas the 805 Bren was designed to a specific set of requirements set out by the Czech military, the Bren 2 is a clean-sheet design. With a bevy of changes, the most noticeable is sure to be the strict weight-loss regimen that the Bren 2 has undergone. With a trimmed-down aluminum receiver and a lower made from carbon fiber-reinforced polymer, the result is a robust but substantially lighter gun. Gone is the reciprocating charging handle, replaced with one that stays stowed in the forward position until it is needed. Swappable from side to side, it does double duty as a forward assist. Also added is an AR-style bolt catch/release system that is mirrored on both sides of the firearm, as well as a catch/release nestled into the front of the trigger guard. The magazine release and safety are also ambidextrous and located in very familiar locations for anyone versed in the AR platform. Chambered in 223 and 7.62×39, each is available in several barrel lengths. AR-15 style magazines are used for 223 variants, whereas in 7.62 the factory’s magazines are used to ensure last round hold-open and consistent feeding. All variants are swappable to different barrel lengths and chamberings and also feature a modular forend that can be swapped to different lengths. In pistol form, the Bren 2 Ms comes with a flush rear plate that has the provision for attaching a AR-style buffer tube for the installation of an arm brace, cheek rest or similar pistol stabilizing device. For those who wish to SBR, a Carbine buffer tube and stock can be installed or the entire rear plate can be removed and replaced with a factory folding/adjustable stock.
|
91450
Out of stock
CZ Bren 2 MS Pistol 9", 7.62x39
The next generation of the Bren, the Bren 2 Ms makes first landfall in the US in pistol form with multiple barrel lengths and two chamberings. Whereas the 805 Bren was designed to a specific set of requirements set out by the Czech military, the Bren 2 is a clean-sheet design. With a bevy of changes, the most noticeable is sure to be the strict weight-loss regimen that the Bren 2 has undergone. With a trimmed-down aluminum receiver and a lower made from carbon fiber-reinforced polymer, the result is a robust but substantially lighter gun. Gone is the reciprocating charging handle, replaced with one that stays stowed in the forward position until it is needed. Swappable from side to side, it does double duty as a forward assist. Also added is an AR-style bolt catch/release system that is mirrored on both sides of the firearm, as well as a catch/release nestled into the front of the trigger guard. The magazine release and safety are also ambidextrous and located in very familiar locations for anyone versed in the AR platform. In pistol form, the Bren 2 Ms comes with a flush rear plate that has the provision for attaching a AR-style buffer tube for the installation of an arm brace, cheek rest or similar pistol stabilizing device. For those who wish to SBR, a Carbine buffer tube and stock can be installed or the entire rear plate can be removed and replaced with a factory folding/adjustable stock. |
91460
Out of stock
CZ Redhead Premier Shotgun, 12 Gauge - 28"
he flagship of our over/under line, the tried-and-true Redhead also gets our new 1-piece CNCed receiver. In addition, it gets the same laser-cut checkering, solid mid-ribs, pistol grip and a classy white bead. The Redhead Premier is a true all-purpose shotgun, it’s just as comfortable to shoot at a sporting clays event as it is when chasing chukhar in the mountains. With a silver receiver and ejectors that kick out the spent shells automatically, the Redhead Premier is packed with features that can’t be found on another shotgun in its price range.
Chambered: 12ga Barrel Length: 28 Chokes: Includes 5 (F,IM,M,IC,C) Weight: 7.7lbs |
06471
Out of stock
CZ Scorpion EVO 3 9mm Pistol, 7.72" – BLK
CZ's Scorpion EVO 3 S1 pistol utilizes the carbine-model's extended, slim profile forend that will hide most 9mm and hybrid cans, while offering M-LOK attachment points and boosting the sight radius a good deal. Low-profile aluminum adjustable sights round out the platform, with a rear sight featuring four different aperture sizes, and a top Picatinny rail for mounting optics. The Scorpion line has a fiber-reinforced polymer frame with an ambidextrous safety. The black polymer pistol grip is adjustable for trigger reach. It still uses the 7.72" cold hammer-forged barrel of the standard Scorpion pistol with a muzzle featuring dual threads of 18x1 and 1/2x28 to make fitting a suppressor simple. Note: Current production Scorpion pistols lack the .75" sling slot on the left side of the action that is present on earlier variants. This model features a 5" KAK Flash Can which extends the barrel to just a hair past the forend. It includes a 20-round magazine. |
91353
Out of stock
CZ Scorpion EVO 3 S1 , 9mm - SB Tactical Folding Brace, 10RD
The CZ Scorpion EVO 3 S1 Pistol is legally classified by the ATF as a pistol, and is intended by CZ-USA to be used as a pistol. This model is equipped with a folding SB Tactical arm brace and wears the forend of its larger brother, the Carbine. With the same 7.7 pistol barrel, owners can unscrew the 5 KAK Flash Can and install most pistol suppressors under the handguard, keeping the overall length down. Dual threads of 181 and 1/2x28 make fitting a suppressor simple. Ships with two 10RND magazines.
Must ship to a U.S. FFL dealer |
01354
Out of stock
CZ Scorpion EVO 3 S1 9mm Pistol – Gray
This CZ Scorpion sub-gun is a blowback-operated semi-auto in 9mm with a 7.75" cold hammer-forged barrel. Its muzzle features 1/2x28 threads hidden underneath the factory flash hider, meaning users can fit either 1/2x28 or 18x1 accessories to the muzzle. Equipped with low-profile sights, its rear sight has four different aperture sizes for everything from close quarters to way out there. The sights ride on an 11" Picatinny rail perfect for mounting optics. It has a polymer frame with a QD sling swivel pocket integrated into the rear sling attachment point. Simple and reliable, the Scorpion not only has ambidextrous controls, its non-reciprocating charging handle is swappable and trigger reach is adjustable. This model has an Battleship gray metal finish. |
91356
Out of stock
CZ Scorpion EVO 3 S1 9mm Pistol – ODG
This CZ Scorpion sub-gun is a blowback-operated semi-auto in 9mm with a 7.75" cold hammer-forged barrel. Its muzzle features 1/2x28 threads hidden underneath the factory flash hider, meaning users can fit either 1/2x28 or 18x1 accessories to the muzzle. Equipped with low-profile sights, its rear sight has four different aperture sizes for everything from close quarters to way out there. The sights ride on an 11" Picatinny rail perfect for mounting optics. It has a polymer frame with a QD sling swivel pocket integrated into the rear sling attachment point. Simple and reliable, the Scorpion not only has ambidextrous controls, its non-reciprocating charging handle is swappable and trigger reach is adjustable. This model has an OD green metal finish. |
91355
Out of stock
CZ Scorpion EVO 3 S1 Carbine w/ Muzzle Break, 9mm
Fit with the factory’s folding adjustable stock, the Carbine features a number of US-made parts to make it fully 922(r) compliant. One of the nicest features of the firearm is the newly-designed forend, covered in M-LOK attachment points to keep the profile slim while still being big enough to swallow most pistol-caliber suppressors should the owner decide down the road to convert it into an SBR for use with a suppressor. Low-profile aluminum adjustable sights round out the platform, and a top Picatinny rail allows the mounting of a wide number of optics. Simple and reliable, the Scorpion not only has ambidextrous controls, its non-reciprocating charging handle is swappable and reach to the trigger is adjustable. Chambering: 9mm Luger
|
08505
Out of stock
CZ Guns
Two letters can stand for a stronger defense. CZ guns have been manufactured to discriminating standards for decades. The guns include desirable features such as hammer forged barrels, tight tolerances and ergonomic grips and controls. The CZ goal is to be a global leader in the manufacture of small arms. Advanced technology, intensive testing, and expert machining contribute to the great reputation behind a CZ gun. The famous CZ 75B pistol is a fixture in government, military, and police forces. It has a trademark all-steel construction in its full pistol size. Unique characteristics are incorporated into the CZ lines, offering owners compacts, safety features, and sight options. Cases and manuals accompany all CZ orders. Additional options for protective gun storage are also on our site at a savings.
The CZ brand is a prolific manufacture of firearms. With high production numbers that are only matched by their quality. Top Gun Supply keeps many of their models in stock. CZ offers many models that vary in design and caliber.
CZ or ‘Česká zbrojovka’ translates to ‘Czech armory’ founded in 1937 this manufacturer has a rich history of producing quality firearms at affordable prices due to their manufacturing methods and resources.
As found on their website about the USA representation.
Headquartered in Kansas City, KS since 1998, CZ-USA is an importer, manufacturer and distributor of pistols, rifles, shotguns and suppressors. The exclusive US importer of rifles and pistols from Česká zbrojovka a.s. Uherský Brod, (CZUB) of the Czech Republic, CZ-USA also designs and imports the CZ-USA Field Sports line of shotguns from Turkey. Fine 1911s and revolvers are made by subsidiary Dan Wesson and a growing line of CZ-USA suppressors is available for rimfire and centerfire firearms.
CZ does not sell direct to consumers but instead uses fully authorized dealers like Top Gun Supply to offer their fine guns to the United States marketplace.
CZ makes the popular Bren and Scorpion models that have the look at feel many appreciate for both sport and self-defense use.
Top Gun also carries many of their 9MM and 45ACP models that are popular for their value, and dependability.
The CZ 457 is a model many love for its ease of use and value. This 22LR model has a synthetic stock and a nitride finish which make it virtually impossible to damage the stock, and great for hunting small game.