CZ USA

Shop by:

Caliber
+ More
Color
Category

CZ USA

more...
CZ USA

Products

CZ P-10 Sub Compact, 9mm - 10RD

SALE

CZ P-10 Sub Compact, 9mm - 10RD

The CZ grip angle, helps the P-10S avoids that 'brick-in-the-hand' feeling that has plagued many in the striker-fired genre, allowing it to point naturally. A mild palm swell, deep beavertail and three interchangeable backstraps make the P-10S fit a wide variety of hands. The P-10S's trigger is designed to minimize creep and stacking, and after initial break-in averages a clean 4.5-5 lb. pull and rebounds with a short, positive reset - meaning single shots can be meticulously placed while follow-ups are effortless. Built to withstand the rigors of military use, its fiber-reinforced polymer frame and hardy nitride finish are made for the daily grind. A generous trigger guard allows use with gloved hands while being undercut to allow as high a grip as possible, and a set of metal tactical sights allow for one-handed manipulation of the slide on a belt. Like all CZ pistols, the P-10S is built with CZ's legendary cold hammer forged barrel. This model has a 10RD capacity.


05160

In stock

$499.95

CZ P-10 Sub Compact, 9mm - FDE

SALE

CZ P-10 Sub Compact, 9mm - FDE

The sub-compact variant in the P-10 line, the S is small and light for comfortable everyday carry. With a bevy of stand-out features that have made the P-10 line a success, the P-10 S has a crisp trigger, superior ergonomics and rugged reliability that set it apart from many in the striker-fired crowd. A reversible magazine release takes just a few minutes work to swap so that lefties can manipulate it with their thumb from the right side of the pistol. Two 10RD Magazines.

01561

In stock

$499.95

CZ P-10 Sub Compact, 9mm

SALE

CZ P-10 Sub Compact, 9mm

CZ's P-10 pistol features a grip angle which avoids that "brick-in-the-hand" feeling that has plagued many in the striker-fired genre, allowing it to point naturally. Its trigger is designed to minimize creep and stacking, and rebounds with a short, positive reset, meaning single shots can be meticulously placed while follow-ups are effortless. The fiber-reinforced polymer frame and hardy nitride finish are made for the daily grind. A generous trigger guard allows use with gloved hands while being undercut to allow as high a grip as possible. It features an ambidextrous slide release and swappable mag release.

Polymer fiber reinforced frame, 12rnd magazines, 3.5" barrel and an overall weight of 24.4 oz. Ships with 2 magazines, case and manual.


91560

In stock

$499.95

CZ 1012 Shotgun, 12 Gauge 28" - Gray Turkish Walnut

CZ 1012 Shotgun, 12 Gauge 28" - Gray Turkish Walnut

The latest evolution in CZ's semi-automatic shotgun line, the 1012 uses a gas-less inertia operating system. Instead of redirecting gas from the barrel to run the action, the 1012 uses a spring within the bolt to store energy during the shotgun’s recoil, spending this energy a split second later to rotate and unlock the twin lugs from the barrel extension and withdraw the spent shell.

The major advantage of an inertia system is the less stringent maintenance schedule. Unlike gas guns that need periodic cleaning of the piston and magazine tube, the 1012’s needs are vastly fewer. During the testing, CZ pushed 1012s to 5,000 rounds without a drop of oil or cleaning of any sort, while experiencing zero parts breakage or malfunctions. In normal field use, the occasional cleaning and oiling should be more than enough.

Additionally, the gas-less system itself is tuned to run a wider variety of shells — from light-recoiling target loads up to the smoking hot 3″ magnums currently on the market. That means the 1012 will readily digest the vast majority of shotshells on the market. Features a 8mm flat vent rib with a 14 1/2" length of pull.

Must ship to a U.S. FFL dealer

06354

Out of stock

Out of stock
CZ 1012 Shotgun, 12 Gauge 28" - Turkish Walnut

CZ 1012 Shotgun, 12 Gauge 28" - Turkish Walnut

The latest evolution in our semi-automatic shotgun line, the 1012 uses a gas-less inertia operating system. Instead of redirecting gas from the barrel to run the action, the 1012 uses a spring within the bolt to store energy during the shotgun’s recoil, spending this energy a split second later to rotate and unlock the twin lugs from the barrel extension and withdraw the spent shell.

The major advantage of an inertia system is the less stringent maintenance schedule. Unlike gas guns that need periodic cleaning of the piston and magazine tube, the 1012’s needs are vastly fewer. During our testing, we pushed 1012s to 5,000 rounds without a drop of oil or cleaning of any sort, while experiencing zero parts breakage or malfunctions. In normal field use, the occasional cleaning and oiling should be more than enough.

Additionally, the gas-less system itself is tuned to run a wider variety of shells — from light-recoiling target loads up to the smoking hot 3″ magnums currently on the market. 28" Barrel, 12GA with a 4 + 1 capacity.

Must ship to a U.S. FFL dealer

06350

Out of stock

Out of stock
CZ 457 American Combo, 22LR & 17HMR

CZ 457 American Combo, 22LR & 17HMR

The American Combo ships with both 22 LR and 17 HMR barrel sets and like all 457s it can be easily swapped between those in minutes.

The classic American-style rimfire rifle, this gorgeous 457 has a 24.8” barrel with no sights and is meant to be topped with a scope. Its Turkish walnut stock has a high, flat comb and a classic checkering pattern. Like all of our 457s, it has an 11mm dovetail milled into the top of its receiver for attaching scope ringmounts.

If we were to pick one thing that our previous rimfire platforms were lacking, it was an American-style push-to-fire safety — something Hunter’s Education instructors and 4-H shooting coaches have begged us to incorporate for years. Though that was the most obvious change, we also took the opportunity to tweak a load of small things at the same time. In addition to the receiver-mounted, push-to-fire safety, we chopped almost an inch of length from the action and slab-sided it to reduce its footprint and weight.

The stamped bottom metal of the 455 is gone, swapped for a classy two-piece interlocking system. To make scope fitment easier, we ditched the 90° bolt rotation in favor of 60°, allowing for larger ocular bell diameters with lower ring heights. To top it all off, the 457 now features a trigger adjustable for weight, creep and over-travel.

With the exact same swappable barrel system as the 455 and the same reliable polymer magazine system, the 457 is without a doubt the best rimfire platform we’ve ever fielded.

02320

Out of stock

Out of stock
CZ 457 American Synthetic SR, 22LR

CZ 457 American Synthetic SR, 22LR

This variant of our 457 American sports a newly-designed synthetic stock that borrows ergonomics and styling cues from our 557 American Synthetic. That synthetic stock, paired with the 457’s nitride finish, makes the rifle near impervious to the elements. 1/2×28 threads and our especially tight chamber tolerances make this rifle an ideal suppressor host.

Not equipped with sights, this rifle has 11mm dovetails milled directly into the CNCed billet action for the solid mounting of rails or rings. The cold hammer forged barrel, fully adjustable trigger, push-to-fire safety and interchangeable barrel system all add up to equal a rifle that will last generations.

02313

Out of stock

Out of stock
CZ 457 American, 22LR

CZ 457 American, 22LR

The classic American-style rimfire rifle, this gorgeous 457 has a 24.8” barrel with no sights and is meant to be topped with a scope. Its Turkish walnut stock has a high, flat comb and a classic checkering pattern. Like all of our 457s, it has an 11mm dovetail milled into the top of its receiver for attaching scope ringmounts.

If we were to pick one thing that our previous rimfire platforms were lacking, it was an American-style push-to-fire safety — something Hunter’s Education instructors and 4-H shooting coaches have begged us to incorporate for years. Though that was the most obvious change, we also took the opportunity to tweak a load of small things at the same time. In addition to the receiver-mounted, push-to-fire safety, we chopped almost an inch of length from the action and slab-sided it to reduce its footprint and weight.

The stamped bottom metal of the 455 is gone, swapped for a classy two-piece interlocking system. To make scope fitment easier, we ditched the 90° bolt rotation in favor of 60°, allowing for larger ocular bell diameters with lower ring heights. To top it all off, the 457 now features a trigger adjustable for weight, creep and over-travel.

With the exact same swappable barrel system as the 455 and the same reliable polymer magazine system, the 457 is without a doubt the best rimfire platform we’ve ever fielded.

02310

Out of stock

Out of stock
CZ Bren 2 MS Carbine 16.5", 5.56

CZ Bren 2 MS Carbine 16.5", 5.56

Based on the select-fire Bren 2, this handy rifle operates via a short-stroke gas piston system with a return spring contained within the action itself. Without the need for a buffer tube, it features a folding, adjustable stock. At 35.6 inches long, folding that stock brings its length down to just 28 inches making it much easier to transport or store. A true lightweight, the Bren 2 has an aluminum upper and a lower made of carbon fiber composite. The 'Ms' designation means that it employs a modular forend that can be swapped to different lengths or styles based on user preference/need. Its non-reciprocating charging handle stays stowed in the forward position until it is needed and is swappable from side to side. An AR-style bolt catch/release system is mirrored on both sides of the firearm, as well as a catch/release nestled into the front of the trigger guard. The magazine release and safety are also ambidextrous.

Must ship to a U.S. FFL dealer

08610

Out of stock

Out of stock
CZ Drake Shotgun, 20 Gauge - 28"

CZ Drake Shotgun, 20 Gauge - 28"

The Drake is an over/under shotgun that uses the same CNCed action and internals as our other shotguns. It features extractor operation, single selectable trigger, mid-rib delete and laser-cut checkering. Included is a set of 5 flush interchangeable chokes. It also features a Turkish Walnut stock with pistol grip, and 28 in barrel. Accepts max shell lengths of 3 in.

Must ship to a U.S. FFL dealer

06093

Out of stock

Out of stock
CZ P-10 9mm 10rd - Black

CZ P-10 9mm 10rd - Black

This replacement or spare magazine is compatible with your CZ P-10F with reversible/ambidextrous mag catch and P-09.

11441

Out of stock

Out of stock
CZ P-10 9mm 21rd - Black

CZ P-10 9mm 21rd - Black

CZ factory OEM 21 round magazine for the CZ P-10 F Reverse and P-09.

11443

Out of stock

Out of stock
CZ P-10 Compact, Fixed Sights, 9mm

CZ P-10 Compact, Fixed Sights, 9mm

CZ's first entry into the striker market, the P-10 Compact checks all the boxes of a rugged, durable, ergonomic pistol, while still retaining the CZ quality and shootability that all CZ's are known for. Taking notes from various deficiencies and quirks of other striker pistols, CZ started with a natural grip angle, a deep cut beavertail, aggressive backstrap and frontstrap checkering, and three interchangeable backstraps to improve overall ergonomics as well as fit a wide variety of hand sizes. To address the trigger, CZ developed a crisp 4.5-5lb pull with minimal creep and stacking, with an ultra-crisp and short reset, ideal for a duty or carry pistol. Additional features include quick and easy takedown, metal three dot sights, durable Nitride finish, cold hammer forged barrel, and a compact 15+1 grip, the P-10C is the complete package. One change madeto the P-10s is the switch to a swappable magazine release. With a change in geometry, the goal was to eliminate the stiffness some customers experienced as the magazine release broke in, even though it became smooth after some use. This new reversible release just requires a few minutes to swap, allowing the P-10 to remain lefty-friendly (replaces SKU: 91520). Comes with two 15RD magazines, two spare backstraps, manual, lock and case.

91531

Out of stock

Out of stock
CZ P-10 Compact, Night Sights, 9mm - FDE

CZ P-10 Compact, Night Sights, 9mm - FDE

With CZ reliability, engineered ergonomics and a bevy of features both familiar and new, the P-10 is the complete package. The CZ grip angle, helps the P-10 avoids that 'brick-in-the-hand' feeling that has plagued many in the striker-fired genre, allowing it to point naturally. A mild palm swell, deep beavertail and three interchangeable backstraps make the P-10 fit a wide variety of hands. The P-10's trigger is designed to minimize creep and stacking, and after initial break-in averages a clean 4.5-5 lb. pull and rebounds with a short, positive reset - meaning single shots can be meticulously placed while follow-ups are effortless. Built to withstand the rigors of military use, its fiber-reinforced polymer frame and hardy nitride finish are made for the daily grind. A generous trigger guard allows use with gloved hands while being undercut to allow as high a grip as possible, and a set of metal tactical sights allow for one-handed manipulation of the slide on a belt. Like all CZ pistols, the P-10 is built with CZ's legendary cold hammer forged barrel. The 'C' in the name indicates that it is compact in both frame and slide size, and magazines are of the same family as the hammer-fired P-07, with this model having a 10RD capacity.

01532

Out of stock

Out of stock
CZ P-10C & P07 9mm 17rd - Black

CZ P-10C & P07 9mm 17rd - Black

CZ factory OEM replacement or spare 17RD magazine is compatible with your CZ P-10C with reversible/ambidextrous mag catch and P-07.

11423

Out of stock

Out of stock
CZ P-10C 9mm 15rd - Black

CZ P-10C 9mm 15rd - Black

CZ factory OEM replacement or spare 15RD magazine is compatible with your CZ P-10C with reversible/ambidextrous mag catch and P-07.

11420

Out of stock

Out of stock
CZ P01, Fixed Sights, 9mm

CZ P01, Fixed Sights, 9mm

These brand new P01 CZ 75D Compact models feature a decocker, M3 rail, lanyard loop, fixed luminescent sights and two 14 round magazines. Comes with a hard carry case and manual.

91199

Out of stock

Out of stock
CZ P07, Fixed Sights, 9mm - BLK

CZ P07, Fixed Sights, 9mm - BLK

The CZ P-07 is the updated version of the CZ 75 P-07 Duty. It features a nitrated slide finish that wears longer and has increased corrosion resistance. The pistol as a whole has been dehorned, removing any sharp edges to make it more comfortable for all-day carry. It also features small, medium and large backstraps and an integrated 1913 Picatinny rail on the dust cover. The P-07 also has an updated trigger shape, as well as a snag-free hammer and forward cocking serrations. This model has a 3.75" barrel, black polymer frame and comes with a 15-round magazine.

91086

Out of stock

Out of stock