An economically priced tool used to secure the screw on front sight of Glock pistols. Works with Ameriglo, Trijicon, Meprolight and Tru-Glo front sights. Knurled end provides a positive grip. 3/16" hex. Gunsmith installation is recommended.

Small screwdriver for rear adjustable Glock sights. Factory Glock part.

MGW Shoe clamp designed to fit the MGW Sight Pro Universal Tool. Each shoe clamp is designed specifically for different handguns and is quickly installed or removed by loosening the shoe clamp mount. MGW Sig Sauer P320 Shoe Clamp.

The B&J P500 Pro Universal Sight Tool is designed to remove front and rear dovetail sights on any semi-automatic handgun. One of the main improvements the Pro Edition offers over the original P500 are the newly designed hardened pusher tips and guide to prevent rotation which can mar the sights. Another improvement is a two position clamp that speeds up setup and prevents the slide from lifting or twisting as well as a newly added end plate to add strength and prevent the slide from shifting. Includes two pushers: one with a squared end for standard sights, and one with an angled end for tapered sights.

The Glock Tall tool is for use on all Glock pistols with higher and straight sided sights. Gunsmith installation is recommended.

For installing and adjusting rear fixed sights on Beretta 92F, 92D, 92DS, 92G and Comparable Taurus pistols. May not work on some of the wider and taller sights including Tru-Glo and adjustable types. Gunsmith installation is recommended.

This MGW tool is for use on all Glock pistols with standard angled side sights. May not work on some of the wider and taller sights including Tru-Glo and adjustable types. Gunsmith installation is recommended.

MGW Shoe clamp designed to fit the MGW Sight Pro Universal Tool. Each shoe clamp is designed specifically for different handguns and is quickly installed or removed by loosening the shoe clamp mount. MGW Sig Pro Shoe Clamp

MGW Shoe clamp designed to fit the MGW Sight Pro Universal Tool. Each shoe clamp is designed specifically for different handguns and is quickly installed or removed by loosening the shoe clamp mount. MGW Glock Shoe Clamp Does not work on Glock 42.

MGW Adapter Kit for Standard and Tall MGW sight tools. Allows you convert your MGW Glock standard or tall sight install tool for installation of Glock 42 & 43 sights. *Not for MGW Universal Sight Tool*

The MGW Replacement Pusher Block installs quick and easy onto your Universal Sight-Pro Install Tool. Avoid scratching or marring your expensive sights with inferior or worn out equpment. Available in both Straight and 30 Degree Angled blocks.

MGW Shoe clamp designed to fit the MGW Sight Pro Universal Tool. Each shoe clamp is designed specifically for different handguns and is quickly installed or removed by loosening the shoe clamp mount. MGW Glock 42/43 Shoe Clamp

Made by MGW, this tool is for use on the rear sight of 1911 style pistols. Will work with all standard 1911 design pistols. May not work on some of the wider and taller sights including Tru-Glo and adjustable types. Gunsmith installation is recommended.

The NEW sight tool for use on Smith & Wesson M&P pistols. This tool is NOT for the M&P Shield. May not work on some of the wider and taller sights including Tru-Glo and adjustable types. Is not designed for the front sight of tactical models or those with 5" barrels. Will not work with the new M&P Shield. Gunsmith installation is recommended.

AR15 front sight wrench designed for for adjusting the elevation on the front sight of your AR-15.

MGW Shoe clamp designed to fit the MGW Sight Pro Universal Tool. Each shoe clamp is designed specifically for different handguns and is quickly installed or removed by loosening the shoe clamp mount. MGW Bersa BP Series Shoe Clamp

MGW Shoe clamp designed to fit the MGW Sight Pro Universal Tool. Each shoe clamp is designed specifically for different handguns and is quickly installed or removed by loosening the shoe clamp mount. MGW Sig P-Series Shoe Clamp.

The MGW Sight Pro Universal Installation Tool is designed to remove a variety of front and rear sights on semi-automatic pistols. No longer will you need a sight tool for each individual pistol, the universal tool accepts gun specific shoe clamps which allows for one tool to work on multiple handguns. This reduces the amount of clutter on your work bench and is a more economical tool for those who require multiple sight tools. The Sight Pro shoe clamp knob holds each individual shoe in place and four slide support brackets secure the slide to prevent twisting or shifting. This rigid design allows for the user to remove the sights without damage or marring to the slide. Includes step by step installation instructions and DVD demonstrating proper use of tool. Does not include shoe clamp as they are specific for each pistol.

The current MGW Sight Pro Tool includes updated design changes to make sight installation even easier. Due to customer feedback regarding purchasing the 30 degree angle block separately, MGW has improved the design of the main body to make it easier to swap out the pusher blocks. As a result of the design change, MGW now provides both pusher blocks (30 degree/Straight) with the SP1000 tool.

Updated design changes:

The support shaft that is opposite of the threaded T-handle was smooth with no key. In order to remove the shaft which is Left Hand Threaded into the main threaded shaft, it was necessary to clamp the smooth support shaft in a vise. This risked damaging the smooth surface and could gall in the aluminum body. This was the reason MGW initially offered a complete carriage assembly for each block. With the new design, the left hand threaded support shaft now is a 416 SS material (was low carbon blued steel) with a 1/4 hex broach in the end. The support shaft can now be quickly and easily removed to swap out blocks with a standard 1/4" hex allen key supplied in this kit.