Trijicon

The Trijicon Miniature Rifle Optic (MRO) is a reflex-style, sealed sight intended for use on rifles, carbines, and shotguns to provide fast target acquisition. It is designed to be used with both eyes open, providing the operator with maximum situational awareness. The large aperture and tapered light path maximizes the viewing area in such a small optic, allowing for fast target engagement especially from non-standard shooting positions. It also features ambidextrous brightness controls, sub-flush adjusters, advanced lens coatings, and a fully sealed, waterproof, hard anodized forged 7075-T6 housing, making the MRO the ultimate mini reflex sight.

The Trijicon Miniature Rifle Optic (MRO) is a reflex style red dot designed to be used with both eyes open for fast target acquisition. The large aperture and tapered light path maximizes the viewing area in such a small optic, allowing for fast target engagement – especially from non-standard shooting positions. Advanced lens coatings and electronics produce a crisp red dot. The ergonomic adjuster knob features 8 different brightness settings for varying degrees of light. The MRO features fully protected adjusters that maintain zero even during rough handling, and can be adjusted without the need for special tools. The hard-anodized, forged 7075-T6 housing is fully sealed and waterproof, providing durability in the most demanding conditions.

The Trijicon Miniature Rifle Optic (MRO) is a reflex style red dot designed to be used with both eyes open for fast target acquisition. The large aperture and tapered light path maximizes the viewing area in such a small optic, allowing for fast target engagement – especially from non-standard shooting positions. Advanced lens coatings and electronics produce a crisp red dot. The ergonomic adjuster knob features 8 different brightness settings for varying degrees of light. The MRO features fully protected adjusters that maintain zero even during rough handling, and can be adjusted without the need for special tools. The hard-anodized, forged 7075-T6 housing is fully sealed and waterproof, providing durability in the most demanding conditions. Equipped with Full Co-witness Mount.

Trijicon 3 dot green front & orange Novak rear night sight set. Fits all Glock models except the Glock 36. Green/Orange.

Glock Pistol, 3 dot green front & yellow Novak rear night sight set. Fits all Glock models except the Glock 36. Yellow/green

Glock Pistol, 3 dot green front & rear night sight set. This 3 dot green front & green rear night sight set fits Glock models 20, 21, 21SF, 29, 30, 31, 32 and 37.

Glock Pistol, 3 dot green front & yellow rear night sight set. This 3 dot night sight set fits Glock models 20, 21, 21SF, 29, 30, 31, 32 and 37.

Trijicon Night Sight Set for Glock 42/43 pistols. Three dot set up with green front and rear lamps. White ring outline. Green/Green.

Glock Pistol, 3 dot green front & rear night sight set. This 3 dot green front & green rear night sight set fits Glock models 17/17L, 19, 22, 23, 24, 26, 27, 33, 34, 35, 38 and 39.

Glock Pistol, 3 dot green front & yellow rear night sight set. This 3 dot night sight set fits Glock models 17/17L, 19, 22, 23, 24, 26, 27, 33, 34, 35, 38 and 39.

The Trijicon VCOG (Variable Combat Optical Gunsite) is a variable powered riflescope with an LED illuminated first focal plane BDC reticle. Rugged aluminum alloy construction and crystal clear glass combine to make this a versatile Mil-Spec optic capable of CQB and long distance marksmanship. Waterproof to 20 meters.

The 4x32mm model combines ample magnification, low light capability and large field of view to make the TA31F the Trijicon ACOG optic of choice for many shooters. The TA31F reticle is calibrated for 5.56 (.223 cal) flat-top rifles to 800 meters. The TA31F 4x32 ACOG Scope features Dual Illumination Amber Chevron .223 Ballistic Reticle. Comes with the TA51 flat top mount and Scopecoat protective neoprene cover and LENSPEN.

The Trijicon Miniature Rifle Optic (MRO) is a reflex style red dot designed to be used with both eyes open for fast target acquisition. The large aperture and tapered light path maximizes the viewing area in such a small optic, allowing for fast target engagement – especially from non-standard shooting positions. Advanced lens coatings and electronics produce a crisp red dot. The ergonomic adjuster knob features 8 different brightness settings for varying degrees of light. The MRO features fully protected adjusters that maintain zero even during rough handling, and can be adjusted without the need for special tools. The hard-anodized, forged 7075-T6 housing is fully sealed and waterproof, providing durability in the most demanding conditions. Equipped with Lower 1/3 Co-witness Mount.

Trijicon RMR Pistol Mount for Glock pistols.

Trijicon's RMR 45 Degree offset Quick Release mount is ideal for close range shooting. The mount features the ability to attach to either the right or left side of the weapon. It also has return to zero feature in a low weight, low profile design which works with any Picatinny rail. It is constructed of 7075-T6 aluminum with an easy to use one handed tool less mounting system. This model has a matt black anodized finish.

The TA98 Quick Release mount features a single lever release system that allows for quick on/off capability. Able to be configured for left/right lever placement the TA98 features the BLAC lever system which requires no manual adjustment to attain a solid engagement on a 1913 Picatinny rail.

CNC precision machined from a block of 6061-T6 aluminum and finished in hard coat type 3 mil-spec anodized black for an extremely hard, resistant finish.

6061-T6 Aluminum

Type 3 Hard Coat Black Anodizing

Mounts to MIL-STD-1913 Picatinny Rail

Weighs 3.2 Oz

3.5 Inches long

Ambidextrous

Made in the USA

The Trijicon RMR adapter is good for that situation where you need the versatility of a magnified optic paired with a red dot sight in close quarters. This offset rail adapter attaches to the firearm's picatinny rail and provides a short picatinny rail at a 45 degree offset to mount a red dot sight. By mounting a red dot at a 45 degree offset, it allows for an easy transition from the magnified optic by simply rotating the firearm. The low profile of this mount allows you to mount underneath almost any riflescope without removing the scope or rings, or in front/behind the optic. The RMR attaches to standard 1913 picatinny rails, is made of lightweight anodized aluminum and is ambidextrous for right or left handed shooters. *Note- this is just the rail adapter. In order to mount the Trijicon RMR/SRO you will need the RM33 low mount. Made in the USA.