Products reviews

Great product. For anyone that has built a P80 and experienced low engagement between the striker and the cruciform, it is not common knowledge but this trigger bar will fix your problem. The cruciform is bent slightly higher on these pre-eh trigger bars (hence the + symbol stamped on them), so you will get a little more engagement when you use one.

It's very accurate, fun to shoot and the quality is excellent. It's a fun little shooter with some 007 flare.

The gun shoots great. Really soft for a small gun. Point of impact is a little low.

Extremely well made. Very quick switch with no additional parts needed. As accurate as original barrel. Functions flawlessly. A little pricey but I guess you get what you pay for. I am very pleased with the barrel, use it often and would recommend it to others.

Turned a great USP into a greater USP. Highly recommend the official H&K trigger return spring pliers. I used my needle-nose and sent my match return spring into orbit.

I put just over 200 rounds through this magazine during practice for a match. I loaded a full 25 rounds of my federal match ammo in it every time and the magazine funtioned flawless. A really good magazine for the price. It looks like I have caught the match shooting bug again and will be buying plenty more of these

Great transaction, great product, just dropped the barrel in, fit like a glove, no fiddling around with it at all.

First of all, working with the people at Top Gun was great. And the quality/workmanship of the Mec-Gar 15 rd magazine was great. But... was only able to award 3 stars. Where they (Mec-Gar) missed the mark was that I had a nearly 100% jam rate when hand cycling the slide with hollow point ammo (JHP). Upon closer inspection, I measured the opening at the top of the magazine and found them (all 4 of them) about 0.9mm narrower than the factory Beretta Mags. Beretta mags measured 9.6-9.9mm(2x) vs. Mec-Gar 8.9-9.0mm (4x measured). This, in turn, meant that the rounds were lower down the feed ramp; causing the sharp edge of the JHP to catch on the feed-ramp bottom (jamming). The guys at Top Gun immediately offered to take them back; but, I refused the offer; instead, I was able to insert some heavy duty ring lock pliers at the top, and flare the openings about 0.5 to 0.8mm. They now work flawlessly. The front of the bullet is angled a bit higher. Due to the sheetmetal wrap-around at the back end, was not possible to flare along entire length; but, feed just fine. Would have been tempted to return, but really wanted the capacity, and the workmanship of Mec-Gar (obviously, above issued excluded)

Excellent shipping as usual! Easy to install, takes 5-10 minutes at most ( plenty of videos on YouTube). Makes a huge difference in the re set, a must have for any Sig!!

As good as factory!
Great!

Top Gun Supply is top notch! I lucked up a HK SP5k-PDW on their site and ordered it. It is a awesome pistol that was well worth the price Thank you HK and thank you Top Gun Supply for shipping it out so fast.

The HK SP5k-PDW is a timeless design. The fit and finish are second to none and whether you are a collector or a shooter, it is a good addition to any collection. Heckler & Koch really knocked out of the park with these. The inclusion of a sight tool, two 30 round mags, and a lockable hard case made it a no-brained for any HK collector.

Beautiful holster, built for the long haul and just awesome craftsmanship. Mine is a little tight so using the bag method to stretch it out.

Excellent service.

I bought these mags for a defensive pistol class. I was unable to find mags anywhere else that would fit my CZ P01. There is a small gap from the bottom of the grip to the base of the mag. That gap has no affect on shooting, it’s purely aesthetic. My order was processed and shipped within 24 hours! I will buy from Top Gun again.

Unbelievable how easy this tiny 9mm is to shoot! The sites are awesome - especially at night - and the slightly longer barrel on the XL helps with accuracy. The grip texture and contour fits my hand perfectly and having 12+1 rounds in that flush mount mag is amazing. Would like to get the 15 round mag but always out of stock.

once i got the kit installed, i was very pleased with the single action mode, the adjustable trigger stop and the reduced sear spring and reduced trigger return spring , was outstanding. the double action was improved slightly, Im glad i spent the time installing it. i made a set of pliers for the installation of the trigger spring, the only concern was the sear spring didn't have the hooks on the bottom to retain the spring in my first year issue HK. i watched a video on the installation while i was doing the procedure, it requires patients and focus, took about 1 1/2 hrs and a few dozen choice words and was done

Very good ammo - brass cased - reloadable - great price!

I did lots of research on which 22LR ammo is best, as 22 pistols tend to be very fussy and jam if it doesn't like the ammo. Lots of articles and forums recommended the Mini-Mag 40gr 1235 fps specifically. I've shot 60 rounds so far with it, and there wasn't a single jam, just like people said. So far so good! The price here is also excellent, even with shipping it's a little less than my local Walmart with tax.

Made my grip perfect and comfy. It feels like a nice CZ grip now. I also added a dual adjustable trigger and took out the overtravel and pretravel. No adjustments needed now, it fits perfectly in a nice easy hold. Double action shots are no problem. First shot drawn from the holster is easy, no moving my hands around. I have medium sausage hands.

The Short Reset System has been the single best upgrade to my USP. It removed all the slack from the reset and take-up in single-action mode, shortened the reset distance, and made the single-action trigger pull FAR better than the factory match trigger kit. I cannot recommend this highly enough!

It does not come with instructions, so understand in advance that the roll pin that comes in the kit is to replace the slightly-shorter roll pin in the sear (easily replaced in about 10 seconds with a hammer and roll-pin punch), and the spring is to replace the firing pin block spring in the slide (which lightens trigger pull by about 1lb.

If you think a full size 45 is too heavy to wear every day, then you don't use of these with a good gun belt. I started carrying 45's with a light weight commander, then figured out it is not the gun itself that feels heavy, it is the lack of a good holster and belt. This is the best there is, distributing the weight over a wide area. I have a drawer full of old holsters all from top makers, none as good as this. Top quality materials and workmanship, worth every penny, will last for years of daily use. Carry a full size steel frame 45 with ease. Jeff Cooper, Elmer Keith, Clint Smith - all Milt Sparks users, it won't take you long to figure out why.

Purchased this along with the Grayguns 19lb recoil spring. Guide rod fits perfect and definitely helped me on managing felt recoil and follow up shots. 10/10 would recommend to anyone looking to upgrade.

Perfection. Love having genuine HK mag providing super ergonomic full grip and 15+1 capacity. Quick shipping and satisfaction follow-up.

This is the Colt Defender 45 ACP. As with most all Colt firearms, this is a great firearm. Very well made and performs beautifully, and a great looking carry firearm. Not to big for carry, but big enough to fit the bill for a 45 ACP caliber. Nothing but great things to say about the quality of the service of Top Gun Supply. They were very friendly
and they answered all my questions honestly, and were very prompt with all of their services. Very fast and very reasonable shipping cost. The price of the gun was reasonable compared to other dealers. This was my first time to purchase a firearm over the internet, and I was very skeptical; however when the gun was received from Top Gun Supply, it was exactly as advertised. I would not hesitate to purchase another firearm from Top Gun Supply, whether in person or over the internet.

I always enjoy doing business with Top Gun! They appreciate their customers and if needed, you can phone them and actually speak to a person who is dedicated to serving their customers.
It’s great to do business with them and their products are always the best, just like folks that work there.
Great company and people!