5348 Results Found. Displaying Results 4776 - 4800
Rob, about Sig Sauer E2 Grip Kit P226
Feb 18, 2018
Made my grip perfect and comfy. It feels like a nice CZ grip now. I also added a dual adjustable trigger and took out the overtravel and pretravel. No adjustments needed now, it fits perfectly in a nice easy hold. Double action shots are no problem. First shot drawn from the holster is easy, no moving my hands around. I have medium sausage hands.
Was the above review useful to you?
Yes (
4)
/
No (
0)
Mark Stempski, about SIG P226 9mm PARTS KIT
Feb 18, 2018
Glad that these are still available as some of the individual elements aren’t always readily available
Was the above review useful to you?
Yes (
0)
/
No (
0)
Albert , about Wolff Magazine Spring - Sig P226 + 10% - German
Feb 17, 2018
I replaced my original W.German mag springs with the extra power Wolf. Very pleased with Wolf springs as usual. I'm also very pleased with TG Supply's customer service and shppg. I can recommend these springs to all P226 owners.
Was the above review useful to you?
Yes (
1)
/
No (
0)
Herbert Pena, about Sig Sauer Take down Lever - P320
Feb 16, 2018
Must be a up grade,used it on my P250,More slimmer then the original good price.Might order another.
Was the above review useful to you?
Yes (
0)
/
No (
0)
Sean Voudren, about H&K MP5, SP5K and HK94 9mm 30RD Magazine
Feb 15, 2018
Magazines are perfect, high quality german HK production mags. The fuction flawlessly in my Mp5a3f. Best price i have found for new HK mags, and i will be buying more. Shipping was very fast, three days i believe.
Was the above review useful to you?
Yes (
0)
/
No (
0)
Jimbo, about SIG Armorer's Combo Tool
Feb 15, 2018
Works brilliantly in its mission of relieving the sear spring. If I could have figured out how to put a tiny slot in the middle of a small flathead screwdriver's head without snapping it, I wouldn't have needed this. Oh, yes: the Extractor! Worked like a charm. No marring of the stainless, Nitron slide finish around the extractor slot, either, and no flying, spring-loaded extractor pin. New country for me.
Was the above review useful to you?
Yes (
3)
/
No (
1)
Charles, about Grayguns Sig Sauer P320 Hard Duty Use Trigger - Adjustable Straight
Feb 14, 2018
*This review is for the P320 PELT 2 trigger, not the original PELT. The PELT 2 is for post-voluntary-upgrade pistols.
That said, it's a dramatic upgrade that's inexpensive and only takes a few minutes to install. I installed it on a P320F 9mm that shipped from the factory with the 'upgraded' trigger and added disconnector. Out-of-the-box factory trigger weight was 6 lbs. 9 oz. Installation of the PELT 2 trigger alone (they no longer include a reduced-power trigger bar spring) brought the trigger weight down to 4 lbs. 6 oz. It's fairly clean-breaking trigger with a tactile reset that's a bit shorter than factory. Highly recommended.
Was the above review useful to you?
Yes (
2)
/
No (
0)
Michael Reischman, about FN SCAR 16S - Black
Feb 14, 2018
Awesome Riffle. And great customer service. Thanks
Was the above review useful to you?
Yes (
2)
/
No (
0)
Jerry Tate, about H&K P30SK/VP9SK 9mm 10RD Extended Magazine
Feb 14, 2018
Delivery time excellent and received exactly what I ordered. Only negative is the high cost of magazines. Haven't used it yet, but no reason to suspect problems since it is an official HK magazine.
Was the above review useful to you?
Yes (
0)
/
No (
1)
Thomas O Schultz, about Sig Sauer Grip Plate Washer - P220, P225, P232, P245
Feb 14, 2018
Top Gun Supply is my go to place for Sig factory parts. These screws and washers were a perfect fit as I expected. What's more important is the spectacular service you always get from Top Gun Supply. Fast, accurate and personalized. Always a good experience.
Was the above review useful to you?
Yes (
0)
/
No (
0)
ADRIAN, about SIG P220 .45 PARTS KIT
Feb 14, 2018
First time fit in my P220! You can never go wrong with TGS. Thanks Brad!
Was the above review useful to you?
Yes (
1)
/
No (
0)
Edward Weigen, about Sig Sauer Safety Lever Spring - P320
Feb 14, 2018
New P320 owner, 1200 rounds already through the gun. Always take down all components of the slide when cleaning. After cleaning with Remoil spray, I use compressed air on each part to clean and remove excess oil. I do not take the striker assembly apart, because it does not need further disassembly. But during my cleaning process I blew this safety lever spring right off, and lost forever. So I will always keep my thumb on this spring when using compressed air in the future, and you should too. Very small part, and easily falls off. I’m actually surprised it didn’t happen sooner. Thanks to Top Gun Supply for prompt shipping on all my orders! Keep em in the ten!
Was the above review useful to you?
Yes (
1)
/
No (
0)
Ed Kuhlman, about X-Grip - Sig Sauer P320SCF/P250SCF
Feb 13, 2018
The two extenters I purchased did not fit my SigSauer P320SC magazines (12 rounds) because the bottom hole was square, not circular. Because the two SigSauer magazines (12 rounds) with the square hole in the bottom of the magazine did not allow me to insert the magazine properly into the frame. I had to buy another 17 round magazine (with a square hole in the bottom) that the extender would fit on and allow me to insert the 17 round magazine into the frame and lock in place. I had an armor cut off a significant amount of one the extenders in order to use it on the 12 round magazines.
I wish I was more knowledgeable about the differences in the magazines. In looking back at my initial purchase, I should have bought the larger 17 round magazine.
Was the above review useful to you?
Yes (
1)
/
No (
0)
