Sig Sauer P229 Gun Parts

Sig Sauer P229 Gun Parts

Shop by:

Caliber
Color

Products

Sig Sauer Decocking Lever Bearing - P226, P228, P229, P239, P220

Sig Sauer Decocking Lever Bearing - P226, P228, P229, P239, P220

Sig Sauer factory Decocking Lever Bearing for P220, P226, P228, P229 and P239 models.

BEARING-1

In stock

$12.95

Grayguns Dual Adjustable Straight Trigger - Sig Sauer P-Series - STEEL BLACK

Grayguns Dual Adjustable Straight Trigger - Sig Sauer P-Series - STEEL BLACK

The SIG P-Series Dual Adjustable Straight Trigger is the straight-faced version of our legendary curved P-Series Dual Adjustable Trigger. This trigger includes over travel and pre-travel adjustability. (Adjustable for double action slack and single action over travel.)

The optimized trigger face pressure-wall angle provides for outstanding single action sear release and positive, ultra-fast reset control. The ergonomics provides superior double action leverage and control.

Dual Adjustable Straight Trigger Details

This trigger is machined from tough steel. The trigger is carefully heat treated and finished in black oxide. Tight pin hole tolerances assure smooth, solid function. Guaranteed for life against defects in materials or workmanship.

Made with love, supplied with a hex key.

The trigger weight is about .83 ounces (23.45 grams)

Fit Guide

The trigger is designed to fit both current and older model traditional double action (DA/SA/decocker) P-Series pistols, including

  • X5 All-Round
  • P220 (see exceptions below)
  • P226
  • P228
  • P229
  • P227 and others

These triggers are approximately 10mm wide. At this time, we are not suggesting this trigger for guns equipped with the DAK trigger system.

This trigger may not be fully compatible with California compliant or similar P-series pistol models equipped with a magazine disconnector, and Grayguns urges caution. We do not recommend deactivating any mechanical safety device.

The Grayguns DA/SA triggers will not fit SIG Pro, P225 / P6, P239, West German P220s, or most SAO models. Most of these triggers are a narrower 8mm width

Intended to be installed by a qualified Sig Sauer armorer or gunsmith

TRG-SIG-22X-DAS

In stock

$69.00

Sig Sauer Hammer Strut Roll Pin

Sig Sauer Hammer Strut Roll Pin

Sig Sauer factory Hammer Strut Roll Pin (old style) for all models. Pin installs on the base of the Hammer Strut and retains the Mainspring.

PIN-3

In stock

$6.95

Wolff Hammer Spring - SIG P220/225/226/228/229

Wolff Hammer Spring - SIG P220/225/226/228/229

P220 above Serial # 219166

  • Models without plastic retainer/base
  • Factory Standard 24 LB

Sig P225, P226, P228 and P229

  • Factory Standard 24 LB

285 - 16lbs

In stock

$3.99

Grayguns Dual Adjustable Curved Trigger - Sig Sauer P-Series - STEEL BLACK

Grayguns Dual Adjustable Curved Trigger - Sig Sauer P-Series - STEEL BLACK

The Grayguns P-Series Dual Adjustable Curved Trigger is the ultimate trigger upgrade for your Legion Series or any modern DA/SA SIG P-Series pistol.

Bruce Gray has combined the adjustable over-travel feature, unbeatable comfort and control and unrivaled quality of our original OEM SIG Sauer® Legion P22xCT, Classic Standard trigger, with the improved geometry and pre-travel adjustment of our wildly popular P22xST Dual Adjustable Straight Trigger series.

This trigger is the ultimate upgrade for your Legion Series or any modern DA/SA SIG P-Series pistol.

Our Dual Adjustable Curved Trigger

This steel trigger is carefully heat treated and finished in black oxide. Tight pin hole tolerances assure smooth, solid function. The trigger is guaranteed for life against defects in materials or workmanship.

Made with love, supplied with a hex key.

Fit Guide

The Dual Adjustable Curved Trigger is designed to fit both current and older model traditional double action (DA/SA/decocker) P-Series pistols, including:

  • X5 All-Round
  • P220 (see exception below)
  • P226
  • P228
  • P229
  • P227, and others.

These triggers are approximately 10mm wide. At this time, we are not suggesting this trigger for guns equipped with the DAK trigger system.

This trigger may not be fully compatible with California compliant or similar P-Series pistol models equipped with a magazine disconnector, and Grayguns urges caution. We do not recommend deactivating any mechanical safety device.

The Grayguns DA/SA triggers will not fit SIG Pro, P225 / P6, P239, West German P220s, or most SAO models. Most of these triggers are a narrower 8mm width.

TRG-SIG-22X-DAC

In stock

$69.00

Sig Sauer Sear Spring - All DAK

Sig Sauer Sear Spring - All DAK

Sig Sauer factory sear spring for all classic P series models.

1202577

In stock

$6.95

Grayguns Fat Guide Rod - Sig P228/P229 - Stainless

Grayguns Fat Guide Rod - Sig P228/P229 - Stainless

Developed by the renowned gunsmiths of Grayguns, the FAT guide rods are designed to optimally support factory Sig Sauer, and Grayguns custom multi-strand springs for maximum service life and smooth, reliable function. Designed to the maximum nominal diameter to fit each pistol perfectly, FAT rods also eliminate the possibility of coil-jumping and damage when used with correctly-selected after-market single strand recoil springs. Grayguns FAT rods are hardened and stress-relieved to withstand a lifetime of hard use as well as being carefully polished stainless or finished in ultra-durable Super Black. Lifetime guarantee against galling, ringing or breakage. Simply put, some of the highest quality guide rods available today.

Fits Sig Sauer P228 and P229 - Stainless

GRD-SIG-22C-SS

In stock

$20.00

Sig Sauer Take Down Lever - P220/225/226/228/229/245 PHOSPHATE

Sig Sauer Take Down Lever - P220/225/226/228/229/245 PHOSPHATE

Sig Sauer Take Down Lever for P220, P225, P226, P228, P229 and P245 models. This Sig Sauer factory part is phosphate coated as found on the P226 Navy and P220 Combat models.

34280316

In stock

$29.95

SIG Take Down Lever - P220/225/226/228/229/245 Nickel

SIG Take Down Lever - P220/225/226/228/229/245 Nickel

SIG factory Nickel Take Down Lever for P220, P225, P226, P228, P229 and P245 models. Replaces part #34229065N

1200489

In stock

$39.95

Grayguns Enhanced Leverage System ELS - Sig Sauer P Series

Grayguns Enhanced Leverage System ELS - Sig Sauer P Series

The Grayguns proprietary enhanced leverage geometry reduces pull weight approximately 25 percent without compromising reliability or factory safety values. The trigger is dual-adjustable for pre and over-travel, which is what you’d expect from the Industry Leader, GGI.

Each Grayguns enhanced-geometry trigger bar is micro polished for superior smoothness and perfectly timed function.

The trigger kit is engineered to provide several key benefits:

  • Reduces the pull weight of double and single action without the need for spring replacements.
  • Reduced over-travel
  • Reduced pre-travel
  • Maintains all factory safety functions.

The kit is 100 percent American made from precision machined heat treated tool steel.

100% American made from precision machined heat treated tool steel, then hand finished and treated with tungsten DLC for unlimited service life.

This kit is compatible with P226/229/228 pistols that have the larger DAK-capable frame window cut.

This can only be purchased as a complete system and REQUIRES the trigger AND the trigger bar in order to function.

SYS-ELS-STA-DAK

In stock

$159.00

Grayguns Fat Guide Rod - Sig P228/P229 - Super Black

Grayguns Fat Guide Rod - Sig P228/P229 - Super Black

Developed by the renowned gunsmiths of Grayguns, the FAT guide rods are designed to optimally support factory Sig Sauer, and Grayguns custom multi-strand springs for maximum service life and smooth, reliable function. Designed to the maximum nominal diameter to fit each pistol perfectly, FAT rods also eliminate the possibility of coil-jumping and damage when used with correctly-selected after-market single strand recoil springs. Grayguns FAT rods are hardened and stress-relieved to withstand a lifetime of hard use as well as being carefully polished stainless or finished in ultra-durable Super Black. Lifetime guarantee against galling, ringing or breakage. Simply put, some of the highest quality guide rods available today.

Fits Sig Sauer P228 and P229 - Super Black Finish

GRD-SIG-22C-SB

In stock

$25.00

Sig Sauer Hammer Stop Pin - P225/226/228/229

Sig Sauer Hammer Stop Pin - P225/226/228/229

Sig Sauer factory Hammer Stop Pin for P225, P226, P228 and P229 models.

PIN-23

In stock

$6.95

Sig Sauer P228, P229 Replacement Barrel - 9mm - THREADED

Sig Sauer P228, P229 Replacement Barrel - 9mm - THREADED

Factory Sig Sauer threaded barrel for your P228 or P229 9mm. Not for use in a 357SIG or .40S&W Slide. 13.5 X 1 LH Threads. Thread Protector Included. NOTE: This barrel will not fit the E2 models. You would need a P229-1 9mm barrel. M13.5 X 1 LH Threads.



* NOTE * All barrels may require minor fitting.

BBL-229-9-T

In stock

$199.99

Sig Sauer 229-1 E2 Replacement Barrel - 9mm

Sig Sauer 229-1 E2 Replacement Barrel - 9mm

Replacement barrel for your P229-1 E2 9mm. These are factory Sig Sauer drop-in barrels. Not for use in a 357SIG or .40S&W Slide. NOTE: This barrel will not fit standard P228/P229 9mm models.



* NOTE * All barrels may require minor fitting.

BBL-229-1-9

In stock

$169.99

Sig Sauer Mainspring - P220/226/229 DAK - RED

Sig Sauer Mainspring - P220/226/229 DAK - RED

Sig Sauer factory Mainspring (Hammer Spring) for all caliber P220, P226, and P229 DAK models.

MAINSPRING-3

In stock

$5.95

Sig Sauer 229-1 E2 Replacement Barrel - 9mm - THREADED

Sig Sauer 229-1 E2 Replacement Barrel - 9mm - THREADED

Threaded barrel for your P229-1 E2 9mm. These are factory Sig Sauer drop-in barrels. Not for use in a 357SIG or .40S&W Slide. Thread Protector Included. NOTE: This barrel will not fit standard P228/P229 9mm models. M13.5 X 1 LH Threads.



* NOTE * All barrels may require minor fitting.

BBL-229-1-9-T

In stock

$199.99

Sig Sauer Hammer Pivot Pin

Sig Sauer Hammer Pivot Pin

Sig Sauer factory Hammer Pivot Pin, all P series models. Genuine OEM gun parts ensure proper fit and finish as well as keeping your Sig Sauer pistol reliable.

PIN-21

In stock

$9.95

Sig Sauer P229 Conversion Barrel - 357 Sig

Sig Sauer P229 Conversion Barrel - 357 Sig

Converts your P229 from .40S&W to 357SIG or replaces your original 357SIG barrel. These are factory Sig Sauer drop-in barrels.


* NOTE * All barrels may require minor fitting.

BBL-229-357

In stock

$169.99