Sig Sauer P226 Gun Parts

* NOTE * All barrels may require minor fitting.

Sig Sauer factory Trigger Pivot Pin for P225, P226, P228 and P229 models.

SIG factory Nickel Take Down Lever for P220, P225, P226, P228, P229 and P245 models. Replaces part #34229065N

Thread protector for threaded barrels with threads M13.5 X 1LH. Fits SIG P226 9mm, P229 9mm, P239 9mm and P250 9mm factory threaded barrels as well as any other threaded barrels with the M13.5 X 1 LH threads. These are manufactured by Top Gun Supply from aluminum to ensure complete protection of the threads on your expensive threaded barrel. Laser etched to help identify the correct LH on direction.

The SIG P-Series Dual Adjustable Straight Trigger is the straight-faced version of our legendary curved P-Series Dual Adjustable Trigger. This trigger includes over travel and pre-travel adjustability. (Adjustable for double action slack and single action over travel.)

The optimized trigger face pressure-wall angle provides for outstanding single action sear release and positive, ultra-fast reset control. The ergonomics provides superior double action leverage and control.

Dual Adjustable Straight Trigger Details

This trigger is machined from tough steel. The trigger is carefully heat treated and finished in black oxide. Tight pin hole tolerances assure smooth, solid function. Guaranteed for life against defects in materials or workmanship.

Made with love, supplied with a hex key.

The trigger weight is about .83 ounces (23.45 grams)

Fit Guide

The trigger is designed to fit both current and older model traditional double action (DA/SA/decocker) P-Series pistols, including

• X5 All-Round
• P220 (see exceptions below)
• P226
• P228
• P229
• P227 and others

These triggers are approximately 10mm wide. At this time, we are not suggesting this trigger for guns equipped with the DAK trigger system.

This trigger may not be fully compatible with California compliant or similar P-series pistol models equipped with a magazine disconnector, and Grayguns urges caution. We do not recommend deactivating any mechanical safety device.

The Grayguns DA/SA triggers will not fit SIG Pro, P225 / P6, P239, West German P220s, or most SAO models. Most of these triggers are a narrower 8mm width

Intended to be installed by a qualified Sig Sauer armorer or gunsmith

Developed by the renowned gunsmiths of Grayguns, the FAT guide rods are designed to optimally support factory Sig Sauer, and Grayguns custom multi-strand springs for maximum service life and smooth, reliable function. Designed to the maximum nominal diameter to fit each pistol perfectly, FAT rods also eliminate the possibility of coil-jumping and damage when used with correctly-selected after-market single strand recoil springs. Grayguns FAT rods are hardened and stress-relieved to withstand a lifetime of hard use as well as being carefully polished stainless or finished in ultra-durable Super Black. Lifetime guarantee against galling, ringing or breakage. Simply put, some of the highest quality guide rods available today.

Fits Sig Sauer P220 and P226 - Stainless

Developed by the renowned gunsmiths of Grayguns, the FAT guide rods are designed to optimally support factory Sig Sauer, and Grayguns custom multi-strand springs for maximum service life and smooth, reliable function. Designed to the maximum nominal diameter to fit each pistol perfectly, FAT rods also eliminate the possibility of coil-jumping and damage when used with correctly-selected after-market single strand recoil springs. Grayguns FAT rods are hardened and stress-relieved to withstand a lifetime of hard use as well as being carefully polished stainless or finished in ultra-durable Super Black. Lifetime guarantee against galling, ringing or breakage. Simply put, some of the highest quality guide rods available today.

Fits Sig Sauer P220 and P226 - Super Black Finish

Designed with the masters at Hogue, our grips use a miniature version of the highly popular “Piranha” texture. This custom texture is 40 percent more aggressive than standard grips while being smooth enough to carry. These grips provide the form and function you’ve come to expect from Grayguns.

The Grayguns iconic logo – in pewter – is affixed in the grip’s center. The P226 TDA version is designed with an exclusive shape to accommodate both the standard and SIG Legion controls.

Set of (4) Allen Head replacement grip screws for your Sig Sauer P226, P228 or P229 pistols. Uses 3/32" Allen Wrench.

Set of (4) Allen Head replacement grip screws for your Sig Sauer P226, P228 or P229 pistols. Uses 3/32" Allen Wrench.

Rubber Hogue grips with finger grooves for the Sig Sauer P226 pistol. Fits DA/SA and DAK trigger systems.

Sig Sauer factory Magazine Insert for P226 9mm 15RD magazines and P226 .40/357 12RD magazines.

Factory Nickel Short Trigger for the Sig P226, P224, P228 and P229 and recent production P220's. A Short Trigger for the P220 SAO is not available. 10mm wide. The SIG SAUER® Short Trigger is for shooters with small hands and was designed to enhance trigger manipulation for better shooting performance.

Factory Black Short Trigger for the Sig P226, P224, P227, P228 and P229 and recent production P220's. A Short Trigger for the P220 SAO is not available. 10mm wide. The SIG SAUER® Short Trigger is for shooters with small hands and was designed to enhance trigger manipulation for better shooting performance. Phosphate.

SIG factory Rubber Base Plate for the Sig P226 .40/357 and 9mm magazines. This base pad is a complete replacement of the original floorplate. Does not fit 10RD or US made magazines. Fits Itailian and German manufactures magazines.

Sig Sauer factory Decocking Lever for P227, P226, P228 and P229 models. Phosphate finish.

• Requires use of the new style mainspring 34280454. If you pistol has the long mainspring with a metal seat, you will need to also order the new mainspring. If you have the black plastic mainspring seat, you already have the correct mainspring.
• Also requires the new style trigger bar spring with the coil in the middle. If you have the plain curved trigger bar spring, you will need to replace it. Check out our Trigger Bar Spring Page to see photos for comparison.

SIG factory carbon steel Recoil Spring Guide Rod for P220 and P226 models.