Sig Sauer P220 Gun Parts

Sig Sauer P220 Gun Parts

Shop by:

Caliber
Color
Finish

Products

Sig Sauer Mainspring - P220/226/229 DAK - RED

Sig Sauer Mainspring - P220/226/229 DAK - RED

Sig Sauer factory Mainspring (Hammer Spring) for all caliber P220, P226, and P229 DAK models.

MAINSPRING-3

In stock

$5.95

Wolff Recoil Spring - SIG P220/226

Wolff Recoil Spring - SIG P220/226

SIG P220 RECOIL SPRINGS

  • Current production has green painted recoil springs rated at 20LBS.
  • Earlier models had a black recoil spring rated at 15LBS.
  • Super .38 model has a 14LB factory recoil spring.
  • Browning BDA .45 has a 14LB factory recoil spring.

SIG P226 RECOIL SPRINGS

  • Factory Standard - 9mm - 15LB
  • Factory Standard - .40S&W & .357 Sig.: 20LB

*Firing Pin Spring Included

460-14lbs

In stock

$7.79

Grayguns Dual Adjustable Curved Trigger - Sig Sauer P-Series - STEEL BLACK

Grayguns Dual Adjustable Curved Trigger - Sig Sauer P-Series - STEEL BLACK

The Grayguns P-Series Dual Adjustable Curved Trigger is the ultimate trigger upgrade for your Legion Series or any modern DA/SA SIG P-Series pistol.

Bruce Gray has combined the adjustable over-travel feature, unbeatable comfort and control and unrivaled quality of our original OEM SIG Sauer® Legion P22xCT, Classic Standard trigger, with the improved geometry and pre-travel adjustment of our wildly popular P22xST Dual Adjustable Straight Trigger series.

This trigger is the ultimate upgrade for your Legion Series or any modern DA/SA SIG P-Series pistol.

Our Dual Adjustable Curved Trigger

This steel trigger is carefully heat treated and finished in black oxide. Tight pin hole tolerances assure smooth, solid function. The trigger is guaranteed for life against defects in materials or workmanship.

Made with love, supplied with a hex key.

Fit Guide

The Dual Adjustable Curved Trigger is designed to fit both current and older model traditional double action (DA/SA/decocker) P-Series pistols, including:

  • X5 All-Round
  • P220 (see exception below)
  • P226
  • P228
  • P229
  • P227, and others.

These triggers are approximately 10mm wide. At this time, we are not suggesting this trigger for guns equipped with the DAK trigger system.

This trigger may not be fully compatible with California compliant or similar P-Series pistol models equipped with a magazine disconnector, and Grayguns urges caution. We do not recommend deactivating any mechanical safety device.

The Grayguns DA/SA triggers will not fit SIG Pro, P225 / P6, P239, West German P220s, or most SAO models. Most of these triggers are a narrower 8mm width.

TRG-SIG-22X-DAC

In stock

$69.00

Sig Sauer Hammer Reset Spring - P220/245

Sig Sauer Hammer Reset Spring - P220/245

Sig Sauer factory Hammer Reset Spring for P220 and P245 models.

SPRING-39

In stock

$6.95

Sig Sauer Trigger Bar - P220 DAK

Sig Sauer Trigger Bar - P220 DAK

Sig Sauer factory Trigger Bar for P220 DAK models.

34221251

In stock

$59.95

Crimson Trace Laser Grips - Sig Sauer P220

Crimson Trace Laser Grips - Sig Sauer P220

Crimson Trace Laser Grips for the Sig Sauer P220 feature a comfortable and secure rubber texture with a sturdy polymer frame. The easily activated red laser puts you on target fast.

LG-320

Out of stock

Out of stock
Grayguns Classic Standard Curved Trigger - Sig Sauer P-Series

Grayguns Classic Standard Curved Trigger - Sig Sauer P-Series

The P22xCT Classic Standard Trigger adds over-travel adjustability to our original design. Utterly indestructible, the P22xCT Classic Standard is machined from tough steel, carefully heat treated and finished in black oxide. Tight pin hole tolerances assure smooth, solid function.

Our intermediate trigger shape optimizes both SA and DA control for optimal control, and is more comfortable than the factory short trigger it replaces. Guaranteed for life against defects in materials or workmanship.

Made with love, supplied with a hex key.

Will not fit SIG Pro, X5 Allround, P225 / P6, P239 or most SAO models. Also will not fit older P220 with 8mm wide trigger.

Intended to be installed by a qualified Sig Sauer armorer or gunsmith

This product was previously referred to as the P-Series Precision Adjustable Intermediate Trigger (P-SAIT).

TRG-SIG-22X-AIC

Out of stock

Out of stock
Grayguns Dual Adjustable Straight Trigger - Sig Sauer P-Series - STEEL BLACK

Grayguns Dual Adjustable Straight Trigger - Sig Sauer P-Series - STEEL BLACK

The SIG P-Series Dual Adjustable Straight Trigger is the straight-faced version of our legendary curved P-Series Dual Adjustable Trigger. This trigger includes over travel and pre-travel adjustability. (Adjustable for double action slack and single action over travel.)

The optimized trigger face pressure-wall angle provides for outstanding single action sear release and positive, ultra-fast reset control. The ergonomics provides superior double action leverage and control.

Dual Adjustable Straight Trigger Details

This trigger is machined from tough steel. The trigger is carefully heat treated and finished in black oxide. Tight pin hole tolerances assure smooth, solid function. Guaranteed for life against defects in materials or workmanship.

Made with love, supplied with a hex key.

The trigger weight is about .83 ounces (23.45 grams)

Fit Guide

The trigger is designed to fit both current and older model traditional double action (DA/SA/decocker) P-Series pistols, including

  • X5 All-Round
  • P220 (see exceptions below)
  • P226
  • P228
  • P229
  • P227 and others

These triggers are approximately 10mm wide. At this time, we are not suggesting this trigger for guns equipped with the DAK trigger system.

This trigger may not be fully compatible with California compliant or similar P-series pistol models equipped with a magazine disconnector, and Grayguns urges caution. We do not recommend deactivating any mechanical safety device.

The Grayguns DA/SA triggers will not fit SIG Pro, P225 / P6, P239, West German P220s, or most SAO models. Most of these triggers are a narrower 8mm width

Intended to be installed by a qualified Sig Sauer armorer or gunsmith

TRG-SIG-22X-DAS

Out of stock

Out of stock
Grayguns Fat Guide Rod - Sig P220/P226 - Super Black

Grayguns Fat Guide Rod - Sig P220/P226 - Super Black

Developed by the renowned gunsmiths of Grayguns, the FAT guide rods are designed to optimally support factory Sig Sauer, and Grayguns custom multi-strand springs for maximum service life and smooth, reliable function. Designed to the maximum nominal diameter to fit each pistol perfectly, FAT rods also eliminate the possibility of coil-jumping and damage when used with correctly-selected after-market single strand recoil springs. Grayguns FAT rods are hardened and stress-relieved to withstand a lifetime of hard use as well as being carefully polished stainless or finished in ultra-durable Super Black. Lifetime guarantee against galling, ringing or breakage. Simply put, some of the highest quality guide rods available today.

Fits Sig Sauer P220 and P226 - Super Black Finish

GRD-SIG-22F-SB

Out of stock

Out of stock
Hogue Extreme Aluminum Grips P220 - CHECKERED CLEAR ANODIZED

Hogue Extreme Aluminum Grips P220 - CHECKERED CLEAR ANODIZED

Hogue Extreme Aluminum grips are machined for a perfect fit from solid aluminum. They are then checkered for a positive, slip free grip surface and hard anodized for added durability. A P220 is pictured.

20174

Out of stock

Out of stock
Hogue Extreme Aluminum Grips P220 - CHECKERED MATTE BLACK

Hogue Extreme Aluminum Grips P220 - CHECKERED MATTE BLACK

Hogue Extreme Aluminum grips are machined for a perfect fit from solid aluminum. They are then checkered for a positive, slip free grip surface and hard anodized for added durability. A P229 is pictured.

20170

Out of stock

Out of stock
Hogue Extreme G10 Grips P220 - CHECKERED BLACK

Hogue Extreme G10 Grips P220 - CHECKERED BLACK

The G10 grips are another product in the Extreme Series line from Hogue. Manufactured from the high strength G10 composite and checkered for a positive grip. Fits P220 with American Magazine Catch. Will not fit SAO models.

20179

Out of stock

Out of stock
Hogue Grip Screw - P220/P225/P230/245- BLUE

Hogue Grip Screw - P220/P225/P230/245- BLUE

Set of (4) Allen Head replacement grip screws for your Sig Sauer P220, P225, P230 or P245 pistols. Uses 1/8" Allen Wrench.

20009

Out of stock

Out of stock
Hogue Rubber Finger Groove Grips P220

Hogue Rubber Finger Groove Grips P220

Rubber Hogue grips with finger grooves for the Sig P220 pistol with the side magazine release.

20000

Out of stock

Out of stock
Hogue Rubber Grip Panels Sig P220

Hogue Rubber Grip Panels Sig P220

Rubber Hogue grip panels without finger grooves for the Sig P220 pistol.

20010

Out of stock

Out of stock
SIG Firing Pin - P220, P227 Stainless

SIG Firing Pin - P220, P227 Stainless

SIG factory Firing Pin for P220, P227 stainless steel slide models .

FIRING-PIN-2

Out of stock

Out of stock
SIG Magazine Base Plate - P220 7RD - OLD STYLE METAL

SIG Magazine Base Plate - P220 7RD - OLD STYLE METAL

SIG factory Magazine Base Plate for (old style) P220 blued magazines that use the magazine spring to lock the plate.

34221745

Out of stock

Out of stock
SIG Magazine Insert - P220 8RD

SIG Magazine Insert - P220 8RD

SIG factory Magazine Insert for P220 8RD magazines.

34221762

Out of stock

Out of stock

Sig Sauer P220

Our huge selection of Sig Sauer P220 gun parts, tools and accessories are ready to meet your duty, defense and sport shooting needs. Sig Sauer branded parts from the factory. Purchase the genuine product from us and know you are getting the real deal. Keep your P220 running at its best with replacement gun parts from Top Gun Supply.