Sig Sauer P220 Gun Parts
Shop by:
Products
SIG SAUER Factory Guide Rod - BLACK - P220R3 Carry
SIG factory solid carbon steel Recoil Spring Guide Rod for P220 Carry models. |
P00161
In stock
$19.95
Sig Sauer Factory Recoil Spring, P220R3 .45 - Red
Sig Sauer factory replacement recoil spring for P220 Carry .45. |
P00165
In stock
$14.95
Sig Sauer Sear Pivot Pin - Fits All
Sig Sauer factory pivot pin for all classic P series models. |
PIN-5
In stock
$9.95
Sig Sauer E2 Grip Kit P220
Sig Sauer E2 Grip Kit for the P220 pistol. This kit includes all of the required parts to convert to the E2 grip. The ergonomically designed, reduced circumference makes the shooters grip much more comfortable and will especially help those with smaller hands.
|
GRIPKIT-220-E2
In stock
$69.99
Grayguns Master Spring Set - Sig Sauer P-Series - NOT P225/P6
From Grayguns, a Master Spring Set for Sig Sauer P-Series handguns. The P-MSS kit is an action upgrade package designed to reduce trigger pull weight while still providing reliable primer strikes. This set includes two mainsprings, one 17 lb. and one 19 lb., and a competition sear spring. Fits the modern P-Series handguns with a DA/SA system, P220, P224, P225A1, P226, P227, P228, P229 and P-226 X-Five Allround. |
SYS-SIG-22X-MSS
In stock
$16.00
Sig Sauer Hammer - P220/226/229/239 Black - DAK
Sig Sauer factory Hammer for P220, P226, P229 and P239 DAK models, dark finish. The hammer strut pin is integrated into the hammer. |
HAMMER-4
In stock
$45.95
Wolff Recoil Spring - SIG P220/226
SIG P220 RECOIL SPRINGS
SIG P226 RECOIL SPRINGS
*Firing Pin Spring Included |
460-16lbs
In stock
$7.79
Grayguns P320 Adjustable Hybrid Trigger
Bruce Gray combined the best of both worlds when he designed what we know as the hybrid trigger. The unique face allows the shooter can take advantage of finger placement lower on the face, with the comfort of a traditional curved face. This hybrid design reduces trigger weight while preserving all mechanical safety values. The Grayguns P320 Hybrid Trigger uses internal leverage changes to yield superior trigger pull, while supporting the voluntary upgrade’s enhanced reliability and rough handling performance qualities. Includes our adjustable over-travel stop design to shorten reset and take out all gross over-travel. Designed for easy drop-in installation. Specifically designed for P320s with current fire control unit components, or those who have gone through SIG’s Voluntary Upgrade Program. Specifications and Features
Fit GuideFits all variations within the P320 (upgraded) system. Including all sizes, TACOPS Carry, X-VTAC, X-Carry, X-Five and RX versions. DisclaimerThese parts are intended for installation by a qualified armourer or gunsmith. In some cases professional fitting will be required by a trained, qualified armorer/gunsmith who is very familiar with the pistol’s action. This is due to the varying tolerances present in all mass-produced firearms. Although kits fit with no issues in a great majority of pistols, Grayguns is unable to guarantee perfect functionality in every instance. Grayguns does offer installation services for all parts kits we offer. |
TRG-SIG-320-AHT
In stock
$94.00
Grayguns Dual Adjustable Straight Trigger - Sig Sauer P-Series - STEEL BLACK
The SIG P-Series Dual Adjustable Straight Trigger is the straight-faced version of our legendary curved P-Series Dual Adjustable Trigger. This trigger includes over travel and pre-travel adjustability. (Adjustable for double action slack and single action over travel.) The optimized trigger face pressure-wall angle provides for outstanding single action sear release and positive, ultra-fast reset control. The ergonomics provides superior double action leverage and control. Dual Adjustable Straight Trigger DetailsThis trigger is machined from tough steel. The trigger is carefully heat treated and finished in black oxide. Tight pin hole tolerances assure smooth, solid function. Guaranteed for life against defects in materials or workmanship. Made with love, supplied with a hex key. The trigger weight is about .83 ounces (23.45 grams) Fit GuideThe trigger is designed to fit both current and older model traditional double action (DA/SA/decocker) P-Series pistols, including
These triggers are approximately 10mm wide. At this time, we are not suggesting this trigger for guns equipped with the DAK trigger system. This trigger may not be fully compatible with California compliant or similar P-series pistol models equipped with a magazine disconnector, and Grayguns urges caution. We do not recommend deactivating any mechanical safety device. The Grayguns DA/SA triggers will not fit SIG Pro, P225 / P6, P239, West German P220s, or most SAO models. Most of these triggers are a narrower 8mm width Intended to be installed by a qualified Sig Sauer armorer or gunsmith |
TRG-SIG-22X-DAS
In stock
$74.00
Grayguns Fat Guide Rod - Sig P220/P226 - Super Black
Developed by the renowned gunsmiths of Grayguns, the FAT guide rods are designed to optimally support factory Sig Sauer, and Grayguns custom multi-strand springs for maximum service life and smooth, reliable function. Designed to the maximum nominal diameter to fit each pistol perfectly, FAT rods also eliminate the possibility of coil-jumping and damage when used with correctly-selected after-market single strand recoil springs. Grayguns FAT rods are hardened and stress-relieved to withstand a lifetime of hard use as well as being carefully polished stainless or finished in ultra-durable Super Black. Lifetime guarantee against galling, ringing or breakage. Simply put, some of the highest quality guide rods available today. Fits Sig Sauer P220 and P226 - Super Black Finish |
GRD-SIG-22F-SB
In stock
$25.00
Hogue Grip Screw - P220/P225/P230/245- STAINLESS
Set of (4) Allen Head replacement grip screws for your Sig Sauer P220, P225, P230 or P245 pistols. Uses 1/8" Allen Wrench. |
20019
In stock
$8.49
Sig Sauer Extractor - P Series New Style External
SIG factory extractor for late model production P220, with the external extractor and stainless steel slides. Also replaces part 34224580 SIG factory extractor for P227, P226 .40/357, P229 .40/357 and P239 .40/357, SIGPRO, P226 9mm (stainless steel slides), P229 9mm and P239 9mm models. New style, short extractor. |
EXTRACTOR-1
In stock
$34.95
Sig Sauer Take Down Lever - P227/P220/225/226/228/229/245 Blue
Sig Sauer factory Take Down Lever for P227, P220, P225, P226, P228, P229, P239 and P245 models. Part number changed from 34229065. |
LEVER-6
In stock
$26.95
Wolff Hammer Spring - SIG P220/225/226/228/229
P220 above Serial # 219166
Sig P225, P226, P228 and P229
|
285 - 18lbs
In stock
$3.99
Sig Sauer Factory Recoil Spring - 2 Step and .22LR Conversion Kits
Sig Sauer factory replacement recoil spring for the .22LR conversion kits and the 2 Step P series guns with the .22LR slide assembly. |
1200380
In stock
$14.95
Sig Sauer Hammer Strut - P220 - SHORT REACH
Sig Sauer factory Hammer Strut for P220 models. Will not fit older spurred hammers. E2 grip kit hammer strut. |
HAMMER-STRUT-7
In stock
$19.99
Sig Sauer Outer Pin H.D. - All Carbon Slides
Sig Sauer factory Outer Roll Pin for all carbon steel slide models. |
PIN-4
In stock
$9.95
Sig Sauer Slide Catch Lever - P220
Sig Sauer factory Slide Catch Lever for P220 models. |
Lever-16
In stock
$39.95
Sig Sauer P220
Our huge selection of Sig Sauer P220 gun parts, tools and accessories are ready to meet your duty, defense and sport shooting needs. Sig Sauer branded parts from the factory. Purchase the genuine product from us and know you are getting the real deal. Keep your P220 running at its best with replacement gun parts from Top Gun Supply.