Sig Sauer P320 Gun Parts

Sig Sauer P320 Gun Parts

Shop by:

Your results are being filtered by:
  • Manufacturer -> Grayguns, Inc.
Remove Filters

Products

Grayguns Fat Guide Rod - Sig P320 Full Size - Stainless

Grayguns Fat Guide Rod - Sig P320 Full Size - Stainless

Developed by the renowned gunsmiths of Grayguns, the FAT guide rods are designed to optimally support factory Sig Sauer, and Grayguns custom multi-strand springs for maximum service life and smooth, reliable function. Designed to the maximum nominal diameter to fit each pistol perfectly, FAT rods also eliminate the possibility of coil-jumping and damage when used with correctly-selected after-market single strand recoil springs. Grayguns FAT rods are hardened and stress-relieved to withstand a lifetime of hard use as well as being carefully polished stainless or finished in ultra-durable Super Black. Lifetime guarantee against galling, ringing or breakage. Simply put, some of the highest quality guide rods available today.

Fits Sig Sauer P320 Full size - Stainless W/15lb 1911 Recoil Spring

GRD-SIG-320-ST

In stock

$25.00

Grayguns Fat Guide Rod with Spring - P320 X5 - Super Black

Grayguns Fat Guide Rod with Spring - P320 X5 - Super Black

Developed by the renowned gunsmiths of Grayguns, the FAT guide rods are designed to optimally support factory Sig Sauer, and Grayguns custom multi-strand springs for maximum service life and smooth, reliable function. Designed to the maximum nominal diameter to fit each pistol perfectly, FAT rods also eliminate the possibility of coil-jumping and damage when used with correctly-selected after-market single strand recoil springs. Grayguns FAT rods are hardened and stress-relieved to withstand a lifetime of hard use as well as being carefully polished stainless or finished in ultra-durable Super Black. Lifetime guarantee against galling, ringing or breakage. Simply put, some of the highest quality guide rods available today.

Fits Sig Sauer P320 X-FIVE - SUPER BLACK Finish

GGGR-320X5-SB

In stock

$32.00

Grayguns Competition Hybrid Trigger Kit - Sig Sauer P320

Grayguns Competition Hybrid Trigger Kit - Sig Sauer P320

The new Grayguns P320 Competition Trigger System delivers the unequalled smooth feel and hot performance of our custom action work in a cleverly engineered drop-in kit.

Paired with Bruce Gray’s exclusive hybrid trigger design, this is the most advanced drop in competition system available for all post/Voluntary Upgrade P320 models.

The P320 Competition Trigger System is intended for installation by an armorer, gunsmith or skilled individual who is familiar with the P320 fire control unit.

The kit includes the following exclusive Grayguns elements:

  • Our newly designed hybrid trigger with built in over-travel adjustment
  • Precision-ground custom sear, polished and finished in hard nickel PTFE. Specifically designed for competition or range use only.
  • Grayguns original competition sear springs
  • Intermediate competition sear springs
  • Original soft competition trigger bar spring
  • New snappy-reset trigger bar spring
  • Micro-polished, extended safety lever pin

Specifications and Features

  • Specifically intended for use only in P320s that have gone through SIG’s Voluntary Upgrade Program.
  • Reduces trigger pull weight to suit your preferences, with additional springs provided to yield custom pull weights.
  • Adjustable over-travel, stops at optimum trigger face angle
  • Smoother takeup and clean release sensation, with clean reset
  • Preserves factory sear face engagement height and mechanical safety values
  • Proven reliable and durable for high-volume professional use
  • Limited lifetime warranty on materials and workmanship

Fit Guide

Fits all variations within the P320 (upgraded) system. Including all sizes, TACOPS Carry, X-VTAC, X-Carry, X-Five and RX versions.

Disclaimer

These parts are intended for installation by a qualified armourer or gunsmith. In some cases professional fitting will be required by a trained, qualified armorer/gunsmith who is very familiar with the pistol’s action. This is due to the varying tolerances present in all mass-produced firearms. Although kits fit with no issues in a great majority of pistols, Grayguns is unable to guarantee perfect functionality in every instance. Grayguns does offer installation services for all parts kits we offer. Note – The safety lever spring is no longer needed in the P320, and is not included in the kit.

SYS-SIG-320-AHT

In stock

$149.00

Grayguns Hard Duty Use P320 Magazine Base Pad - Standard

Grayguns Hard Duty Use P320 Magazine Base Pad - Standard

These custom Grayguns HDU magazine base pads have been built for military and law enforcement use. Designed to be repeatedly dropped on concrete or asphalt hundreds of times, they are a perfect upgrade for the OEM plastic base pads.

Also appropriate for competition and shooting enthusiasts looking for a quality, durable upgrade.

Backwards compatible with all versions of P320 modules, including the standard and xSeries with or without the extended magwell installed.

  • This is the Standard Version – Designed for the XSeries without the magwell. Also works with the P320 module.

Note: These base pads are compatible with new SIG P320 magazines with the square pegs.

BPD-SIG-32X-HDS

In stock

$19.99

Grayguns Competition Curved Trigger Kit - Sig Sauer P320

Grayguns Competition Curved Trigger Kit - Sig Sauer P320

SIG Sauer® P320 Competition Trigger Kit can now be installed by an armorer, gunsmith or skilled individual who is familiar with the P320 fire control unit. The kit is specifically designed for guns that have gone through SIG’s Voluntary Upgrade Program. The kit includes the following elements:
  • Precision-ground Grayguns custom sear, polished and finished in hard nickel PTFE. Specifically designed for competition or range use only.
  • Grayguns competition sear springs
  • Grayguns competition trigger bar spring
  • Over-travel stop tube
  • Micro-polished, extended safety lever pin

The Grayguns P320 Competition Trigger Kit yields superior trigger pull results while supporting the voluntary upgrade’s enhanced reliability and rough handling performance qualities. It yields a trigger pull weight of approximately 3.5 to 5 pounds. The kit with included competition sear is designed exclusively for competition or range use only.

SYS-SIG-320-CT

In stock

$129.00

Grayguns Hard Duty Use P320 Magazine Base Pad - Extended

Grayguns Hard Duty Use P320 Magazine Base Pad - Extended

Designed for hard-duty use. Our custom Grayguns SIG Sauer P320 magazine base pads are manufactured from 6061 Aluminum. Professionally finished with MIL-A-8625 Type III anodized coating. Pads go through a glass-beading process to provide a flat-black finish.

The base pad is the same thickness as the OEM SIG base pad. A relief cut on the sides enhances malfunction drills, and allows for effective one-handed reloads using the belt or holster.

The cut mirrors the normal P320 module’s and creates a cut for the X-Series modules.

Each pad features a 3-by-5 matrix. Number your mags using a Sharpie or paint pen. Additional space is available to write your initials.

Backwards compatible with all versions of P320 modules, including the standard and X-Series with or without the extended magwell installed.

  • This the Extended Version Designed for the full-size magazine in a XSeries with the magwell. Also works with 21-round magazines and fits the standard P320.

Note: These base pads are compatible with new SIG P320 magazines with the square pegs.

BPD-SIG-32X-HDE

In stock

$19.99

Grayguns Sig Sauer P320 Hard Duty Use Trigger - Curved

Grayguns Sig Sauer P320 Hard Duty Use Trigger - Curved

The Grayguns P320ST and P320CT triggers are specifically designed for guns that have gone through SIG Sauer’s® Voluntary Upgrade Program. The trigger is available in your choice of straight-face or curved-face design.

The Grayguns P320 trigger yields superior trigger pull results while supporting the voluntary upgrade’s enhanced reliability and rough handling performance qualities. It is designed for drop-in installation.

P320 Trigger – Straight or Curved – Specifications and Features

  • Specifically intended for use only in P320s that have gone through SIG’s Voluntary Upgrade Program.
  • Reduces total trigger pull weight approximately 2 pounds below factory-stock for the standard series, and about 1.25 pounds for the X-Five variant.
  • Designed for use with the SIG factory trigger bar spring
  • Minimal over-travel, stops at optimum trigger face angle
  • Smoother takeup and release sensation
  • Preserves factory sear engagement and mechanical safety values
  • Proven reliable and durable for high-volume professional use
  • Our triggers are externally comparable in appearance to the factory part
  • Limited lifetime warranty on materials and workmanship

Fits all variations within the P320 (upgraded) system. Including all sizes, TACOPS Carry, X-VTAC, X-Carry, X-Five and RX versions.

This trigger was previously described as our Practical Enhanced Leverage Trigger (PELT).


TRG-SIG-320-CT

In stock

$89.00

Grayguns Sig Sauer P320 Hard Duty Use Trigger - Straight

Grayguns Sig Sauer P320 Hard Duty Use Trigger - Straight

The Grayguns P320ST and P320CT triggers are specifically designed for guns that have gone through SIG Sauer’s® Voluntary Upgrade Program. The trigger is available in your choice of straight-face or curved-face design.

The Grayguns P320 trigger yields superior trigger pull results while supporting the voluntary upgrade’s enhanced reliability and rough handling performance qualities. It is designed for drop-in installation.

P320 Trigger – Straight or Curved – Specifications and Features

  • Specifically intended for use only in P320s that have gone through SIG’s Voluntary Upgrade Program.
  • Reduces total trigger pull weight approximately 2 pounds below factory-stock for the standard series, and about 1.25 pounds for the X-Five variant.
  • Designed for use with the SIG factory trigger bar spring
  • Minimal over-travel, stops at optimum trigger face angle
  • Smoother takeup and release sensation
  • Preserves factory sear engagement and mechanical safety values
  • Proven reliable and durable for high-volume professional use
  • Our triggers are externally comparable in appearance to the factory part
  • Limited lifetime warranty on materials and workmanship

Fits all variations within the P320 (upgraded) system. Including all sizes, TACOPS Carry, X-VTAC, X-Carry, X-Five and RX versions.

This trigger was previously described as our Practical Enhanced Leverage Trigger (PELT).


TRG-SIG-320-ST

Out of stock

$89.00

Out of stock

Sig Sauer P320 Gun Parts

Shopping for Sig Sauer P320 parts? You have arrived at the right place! Top Gun Supply is your best source for all things SIG. We stock a huge selection of factory Sig Sauer parts to keep your gun up and running at its optimal performance level. We are here for you and promise to provide the best service you will find on the internet. We have certified Sig Sauer P320 Armorers on staff that can answer your questions and help you to determine what gun parts you may need. Our unique connection to the factory allows us to serve you better and to provide you with the hard to find parts. We will get them to you fast in order to reduce down time on your weapon. When you need to rely on your firearm, buy a Sig Sauer!