Sig Sauer P320 Gun Parts

Sig Sauer P320 Gun Parts

Products

Bar-Sto Threaded Barrel - Sig P320 Full-Size 9mm 1/2x28

Bar-Sto Threaded Barrel - Sig P320 Full-Size 9mm 1/2x28

Bar-Sto Semi Fit threaded barrel for the Sig Sauer P320 9mm full-size handgun. Features stainless steel construction, 1/2x28 threads and an included thread cap. Suppress your Sig P320 using a Bar-Sto Precision Machine barrel!

* May require minor fitting by a qualified gunsmith

BS-BBL-P320-F-9-TB

In stock

$320.00

Sig Sauer P250/320 Grip 9/40/357 Carry - Small Grip

Sig Sauer P250/320 Grip 9/40/357 Carry - Small Grip

Factory Sig Sauer P250/P320 Grip Module allows the shooter to tailor the pistol to meet their specific grip size requirements. Black polymer construction and comes with the magazine catch installed. This is the small grip for the 9mm, .40S&W and .357SIG P250/P320 Carry. New style grip module with picatinny rail. Only new style P250 magazines will fit this module.

*Note: These are the updated Grip Modules these Grip Modules are NOT compatible with the older style slide catch lever.

GRIP-MOD-CA-943-SM-BLK

In stock

$39.95

Bar-Sto Conversion Barrel - Sig P320 Full-Size 9mm

Bar-Sto Conversion Barrel - Sig P320 Full-Size 9mm

Bar-Sto Semi Fit Conversion for the Sig Sauer P320 full-size handgun. Converts Sig Sauer P320 .40/.357 to 9mm. Convert calibers on your Sig P320 using a Bar-Sto Precision Machine barrel!

* May require minor fitting by a qualified gunsmith

BS-BBL-P320-F-9

In stock

$230.00

Sig Sauer Striker Housing - P320

Sig Sauer Striker Housing - P320

Factory Sig Sauer Sriker Housing for the P320.

1300745

In stock

$19.99

Springer Precision Sig P320 Extended Magazine Release - Blue

Springer Precision Sig P320 Extended Magazine Release - Blue

Springer Precision Sig Sauer P320 Extended Magazine Releases are made from a high strength alloy and hard coated and match the factory profile per rule 21.6 in the USPSA rulebook. These are a great addition to competition pistols or for those who want a little extra reach so you don't have to shift your grip to drop a magazine. This is extended .1" longer than the factory release and is suitable for carry and competition use. .092oz *USPSA Production, Limited, and Open approved. Blue.


USPSA Rule Book 2014 Production Division 21.6 Special Notes/Clarifications:
"A factory/OFM magazine release which extends only the length of the magazine release may be used."

We specifically make an factory release that extends the length only per the 21.6 rule. It is specifically allowed and verifed by NROI for use in the Production Division.

Does not fit the sub-compact grip modules or the .45 grip modules.

SP0206-BLUE

In stock

$37.50

Grayguns Hard Duty Use P320 Magazine Base Pad - Extended

Grayguns Hard Duty Use P320 Magazine Base Pad - Extended

Designed for hard-duty use. Our custom Grayguns SIG Sauer P320 magazine base pads are manufactured from 6061 Aluminum. Professionally finished with MIL-A-8625 Type III anodized coating. Pads go through a glass-beading process to provide a flat-black finish.

The base pad is the same thickness as the OEM SIG base pad. A relief cut on the sides enhances malfunction drills, and allows for effective one-handed reloads using the belt or holster.

The cut mirrors the normal P320 module’s and creates a cut for the X-Series modules.

Each pad features a 3-by-5 matrix. Number your mags using a Sharpie or paint pen. Additional space is available to write your initials.

Backwards compatible with all versions of P320 modules, including the standard and X-Series with or without the extended magwell installed.

  • This the Extended Version Designed for the full-size magazine in a XSeries with the magwell. Also works with 21-round magazines and fits the standard P320.

Note: These base pads are compatible with new SIG P320 magazines with the square pegs.

BP-LE320-1A

In stock

$18.00

Sig Sauer Magazine Base Plate - P320/P250 9mm, .40SW, .357SIG New Style

Sig Sauer Magazine Base Plate - P320/P250 9mm, .40SW, .357SIG New Style

Sig Sauer factory base pad for Sig Sauer P320/P250 new style grip modules. Round Hole.

1300338

In stock

$14.95

Sig Sauer P250/320 Grip 9/40/357 Full Size - Large Grip

Sig Sauer P250/320 Grip 9/40/357 Full Size - Large Grip

Factory Sig Sauer P320 Grip Module allows the shooter to tailor the pistol to meet their specific grip size requirements. Black polymer construction and comes with the magazine catch installed. This is the Large grip for the 9mm, .40S&W and .357SIG P320 Full Size.

*Note: These are the updated Grip Modules these Grip Modules are NOT compatible with the older style slide catch lever.

1300099

In stock

$39.95

Bar-Sto Conversion Barrel - Sig P320 Carry/Compact 9mm

Bar-Sto Conversion Barrel - Sig P320 Carry/Compact 9mm

Semi Fit, stock length Conversion Barrel to convert your Sig P320 Carry or Compact from .40/357 to 9mm.

* May require minor fitting by a qualified gunsmith

BS-BBL-P320-CR-9

Out of stock

$230.00

Out of stock
Grayguns Competition Straight Trigger Kit - Sig Sauer P320

Grayguns Competition Straight Trigger Kit - Sig Sauer P320

SIG Sauer® P320 Competition Trigger Kit can now be installed by an armorer, gunsmith or skilled individual who is familiar with the P320 fire control unit. The kit is specifically designed for guns that have gone through SIG’s Voluntary Upgrade Program. The kit includes the following elements:
  • Precision-ground Grayguns custom sear, polished and finished in hard nickel PTFE. Specifically designed for competition or range use only.
  • Straight Grayguns Enhanced Leverage Trigger
  • Grayguns competition sear springs
  • Grayguns competition trigger bar spring
  • Over-travel stop tube
  • Micro-polished, extended safety lever pin
  • Includes a Grayguns sticker & morale patch

The Grayguns P320 Competition Trigger Kit yields superior trigger pull results while supporting the voluntary upgrade’s enhanced reliability and rough handling performance qualities. It yields a trigger pull weight of approximately 3.5 to 5 pounds. The kit with included competition sear is designed exclusively for competition or range use only.

KT-3100-4A

Out of stock

$129.00

Out of stock
Grayguns Fat Guide Rod - Sig P320 Full Size - Super Black

Grayguns Fat Guide Rod - Sig P320 Full Size - Super Black

Developed by the renowned gunsmiths of Grayguns, the FAT guide rods are designed to optimally support factory Sig Sauer, and Grayguns custom multi-strand springs for maximum service life and smooth, reliable function. Designed to the maximum nominal diameter to fit each pistol perfectly, FAT rods also eliminate the possibility of coil-jumping and damage when used with correctly-selected after-market single strand recoil springs. Grayguns FAT rods are hardened and stress-relieved to withstand a lifetime of hard use as well as being carefully polished stainless or finished in ultra-durable Super Black. Lifetime guarantee against galling, ringing or breakage. Simply put, some of the highest quality guide rods available today.

Fits Sig Sauer P320 Full size - Super Black Finish W/15lb 1911 Recoil Spring

GGGR-BK320

Out of stock

$30.00

Out of stock
Grayguns Fat Guide Rod with Spring - P320 X5 - Super Black

Grayguns Fat Guide Rod with Spring - P320 X5 - Super Black

Developed by the renowned gunsmiths of Grayguns, the FAT guide rods are designed to optimally support factory Sig Sauer, and Grayguns custom multi-strand springs for maximum service life and smooth, reliable function. Designed to the maximum nominal diameter to fit each pistol perfectly, FAT rods also eliminate the possibility of coil-jumping and damage when used with correctly-selected after-market single strand recoil springs. Grayguns FAT rods are hardened and stress-relieved to withstand a lifetime of hard use as well as being carefully polished stainless or finished in ultra-durable Super Black. Lifetime guarantee against galling, ringing or breakage. Simply put, some of the highest quality guide rods available today.

Fits Sig Sauer P320 X-FIVE - SUPER BLACK Finish

GGGR-320X5-SB

Out of stock

$32.00

Out of stock
Grayguns Hard Duty Use P320 Magazine Base Pad - Standard

Grayguns Hard Duty Use P320 Magazine Base Pad - Standard

These custom Grayguns HDU magazine base pads have been built for military and law enforcement use. Designed to be repeatedly dropped on concrete or asphalt hundreds of times, they are a perfect upgrade for the OEM plastic base pads.

Also appropriate for competition and shooting enthusiasts looking for a quality, durable upgrade.

Backwards compatible with all versions of P320 modules, including the standard and xSeries with or without the extended magwell installed.

  • This is the Standard Version – Designed for the XSeries without the magwell. Also works with the P320 module.

Note: These base pads are compatible with new SIG P320 magazines with the square pegs.

BP-LE325-1A

Out of stock

$18.00

Out of stock
Grayguns Sig Sauer P320 PELT 2 Trigger - Straight

Grayguns Sig Sauer P320 PELT 2 Trigger - Straight

The Grayguns Practical Enhanced Leverage Trigger for the Sig Sauer P320 is a drop-in, bar-stock, enhanced trigger for your P320 that reduces trigger weight while preserving all mechanical safety values. Features include: Full compatibility with the P320 system, Reduction of total trigger pull weight approximately 2 pounds below factory-stock, Minimal over-travel, stops at optimum trigger face angle, Smoother takeup and release sensation, Preserves factory sear engagement and mechanical safety values, Proven reliable and durable for high-volume professional use, Curved-face style approved for USPSA Production competition, Limited lifetime warranty on materials and workmanship. The trigger is specifically designed for guns that have gone through SIG Sauer’s® Voluntary Upgrade Program.

Includes:

  • Trigger in your choice of straight-face or curved-face
  • Intended to be installed by a qualified Sig Sauer armorer or gunsmith

PELT-2-Straight

Out of stock

$89.00

Out of stock
Sig Sauer Extractor - P320/250

Sig Sauer Extractor - P320/250

SIG Sauer factory external Extractor for the P320 & P250

1301042-01

Out of stock

$8.95

Out of stock
Sig Sauer Extractor Spring Pin - P320

Sig Sauer Extractor Spring Pin - P320

SIG Sauer factory Extractor Spring Pin for the P320.

1301047

Out of stock

$6.95

Out of stock
Sig Sauer Mag Catch Stop - P320/P250

Sig Sauer Mag Catch Stop - P320/P250

Sig Sauer factory Mag Catch Stop for the P320/P250.

STOP-2

Out of stock

$3.95

Out of stock
Sig Sauer P250/320 Grip .45ACP Full Size - Medium Grip - FDE

Sig Sauer P250/320 Grip .45ACP Full Size - Medium Grip - FDE

Factory Sig Sauer P250/P320 Grip Module allows the shooter to tailor the pistol to meet their specific grip size requirements. Polymer construction and comes with the magazine catch installed. This is the medium grip for the .45ACP P250/P320 Full Size. Flat Dark Earth.

1300309FDE

Out of stock

$39.95

Out of stock

Sig Sauer P320 Gun Parts

Shopping for Sig Sauer P320 parts? You have arrived at the right place! Top Gun Supply is your best source for all things SIG. We stock a huge selection of factory Sig Sauer parts to keep your gun up and running at its optimal performance level. We are here for you and promise to provide the best service you will find on the internet. We have certified Sig Sauer P320 Armorers on staff that can answer your questions and help you to determine what gun parts you may need. Our unique connection to the factory allows us to serve you better and to provide you with the hard to find parts. We will get them to you fast in order to reduce down time on your weapon. When you need to rely on your firearm, buy a Sig Sauer!