Sig Sauer P320 Gun Parts

Sig Sauer P320 Gun Parts

Products

Grayguns Fat Guide Rod with Spring - P320 X5 - Super Black

Grayguns Fat Guide Rod with Spring - P320 X5 - Super Black

Developed by the renowned gunsmiths of Grayguns, the FAT guide rods are designed to optimally support factory Sig Sauer, and Grayguns custom multi-strand springs for maximum service life and smooth, reliable function. Designed to the maximum nominal diameter to fit each pistol perfectly, FAT rods also eliminate the possibility of coil-jumping and damage when used with correctly-selected after-market single strand recoil springs. Grayguns FAT rods are hardened and stress-relieved to withstand a lifetime of hard use as well as being carefully polished stainless or finished in ultra-durable Super Black. Lifetime guarantee against galling, ringing or breakage. Simply put, some of the highest quality guide rods available today.

Fits Sig Sauer P320 X-FIVE - SUPER BLACK Finish

GGGR-320X5-SB

In stock

$32.00

Springer Precision Sig P320 +10 9mm Base Pad w/Extra Power Spring - Blue

Springer Precision Sig P320 +10 9mm Base Pad w/Extra Power Spring - Blue

Springer Precision Sig P320 9mm +10 extended capacity base pads are CNC machined from aluminum and hard anodized for a long service life. This base pad includes with an extra power spring to use with your follower. The unique locking mechanism allows a very solid attachment with a simple backing out of the discrete set screw. They are specifically designed to work with Springer Precision mag wells. The unique attachment design provides a low profile, sleek design that is very stable and easy to remove. Includes a .050 hex driver that makes installation and removal a breeze. There will be a gap between the base pad and frame if used with a compact model. Blue 2.474oz

SP0239-BLUE

In stock

$50.00

Springer Precision Sig P320 +10 9mm Base Pad w/Extra Power Spring - Red

Springer Precision Sig P320 +10 9mm Base Pad w/Extra Power Spring - Red

Springer Precision Sig P320 9mm +10 extended capacity base pads are CNC machined from aluminum and hard anodized for a long service life. This base pad includes with an extra power spring to use with your follower. The unique locking mechanism allows a very solid attachment with a simple backing out of the discrete set screw. They are specifically designed to work with Springer Precision mag wells. The unique attachment design provides a low profile, sleek design that is very stable and easy to remove. Includes a .050 hex driver that makes installation and removal a breeze. There will be a gap between the base pad and frame if used with a compact model. Red 2.474oz

SP0239-RED

In stock

$50.00

Sig Sauer P250/320 Grip .45ACP Full Size - Large Grip

Sig Sauer P250/320 Grip .45ACP Full Size - Large Grip

Factory Sig Sauer P250 Grip Module allows the shooter to tailor the pistol to meet their specific grip size requirements. Black polymer construction and comes with the magazine catch installed. This is the large grip for the .45ACP P250 Full Size.

*Note: These are the updated Grip Modules which includes a replacement new style slide catch lever, slide catch lever spring, and slide catch post.

1300105

In stock

$39.95

Sig Sauer P250/320 Grip .45ACP Full Size - Large Grip - FDE

Sig Sauer P250/320 Grip .45ACP Full Size - Large Grip - FDE

Factory Sig Sauer P250/P320 Grip Module allows the shooter to tailor the pistol to meet their specific grip size requirements. Polymer construction and comes with the magazine catch installed. This is the large grip for the .45ACP P250/P320 Full Size. Flat Dark Earth.

1300105FDE

In stock

$39.95

Springer Precision Sig P320 140mm 9/40 EZ Base Pad w/Extra Power Spring - Red

Springer Precision Sig P320 140mm 9/40 EZ Base Pad w/Extra Power Spring - Red

Springer Precision SIG P320/P250 9/40 140mm extended capacity base pads are CNC machined from aluminum and hard anodized for a long service life. This lengthens the magazine and adds rounds to your magazine. More rounds can be added if you choose the Grams follower options. The unique locking mechanism allows a very solid attachment with a simple backing out of the discrete set screw. They fit the USPSA 140mm magazine gauge. The unique attachment design provides a low profile, sleek design that is very stable and easy to remove. * We include a .050 hex driver that makes installation and removal a breeze. Up to 23 9mm and 20 40. cal rounds with the extra capacity follower kit. Comes with an extra power spring. Red 1.40 oz

SP019-RED

In stock

$35.00

Sig Sauer Sear Spring - P320

Sig Sauer Sear Spring - P320

Sig Sauer factory Sear Spring for the P320.

1300799

In stock

$6.95

Sig Sauer P320 Full Size Replacement Barrel - 9mm

Sig Sauer P320 Full Size Replacement Barrel - 9mm

Replacement barrel for your P320 Full Size 9mm. These are factory Sig Sauer drop-in barrels. Not for use in a 357SIG or .40S&W Slide. Black finish.

* NOTE * All barrels may require minor fitting.

BBL-MOD-F-9

In stock

$169.99

Grayguns Hard Duty Use P320 Magazine Base Pad - Standard

Grayguns Hard Duty Use P320 Magazine Base Pad - Standard

These custom Grayguns HDU magazine base pads have been built for military and law enforcement use. Designed to be repeatedly dropped on concrete or asphalt hundreds of times, they are a perfect upgrade for the OEM plastic base pads.

Also appropriate for competition and shooting enthusiasts looking for a quality, durable upgrade.

Backwards compatible with all versions of P320 modules, including the standard and xSeries with or without the extended magwell installed.

  • This is the Standard Version – Designed for the XSeries without the magwell. Also works with the P320 module.

Note: These base pads are compatible with new SIG P320 magazines with the square pegs.

BPD-SIG-32X-HDS

In stock

$19.99

Sig Sauer P320/P250 Grip, 9/40/357, Carry - Large

Sig Sauer P320/P250 Grip, 9/40/357, Carry - Large

Install your P320/P250 firing control unit into this Grip Module Assembly to convert to a P320 or P250 carry
chambered in 9mm, .357 SIG, .40AUTO. Requires the 9mm, .357 SIG and .40AUTO slide and barrel.

GRIP-MOD-CA-943-LG-BLK

In stock

$39.95

Grayguns Competition Curved Trigger Kit - Sig Sauer P320

Grayguns Competition Curved Trigger Kit - Sig Sauer P320

SIG Sauer® P320 Competition Trigger Kit can now be installed by an armorer, gunsmith or skilled individual who is familiar with the P320 fire control unit. The kit is specifically designed for guns that have gone through SIG’s Voluntary Upgrade Program. The kit includes the following elements:
  • Precision-ground Grayguns custom sear, polished and finished in hard nickel PTFE. Specifically designed for competition or range use only.
  • Grayguns competition sear springs
  • Grayguns competition trigger bar spring
  • Over-travel stop tube
  • Micro-polished, extended safety lever pin

The Grayguns P320 Competition Trigger Kit yields superior trigger pull results while supporting the voluntary upgrade’s enhanced reliability and rough handling performance qualities. It yields a trigger pull weight of approximately 3.5 to 5 pounds. The kit with included competition sear is designed exclusively for competition or range use only.

SYS-SIG-320-CT

In stock

$129.00

Springer Precision Sig P320 140mm 9/40 EZ Base Pad w/Extra Power Spring - Blue

Springer Precision Sig P320 140mm 9/40 EZ Base Pad w/Extra Power Spring - Blue

Springer Precision SIG P320/P250 9/40 140mm extended capacity base pads are CNC machined from aluminum and hard anodized for a long service life. This lengthens the magazine and adds rounds to your magazine. More rounds can be added if you choose the Grams follower options. The unique locking mechanism allows a very solid attachment with a simple backing out of the discrete set screw. They fit the USPSA 140mm magazine gauge. The unique attachment design provides a low profile, sleek design that is very stable and easy to remove. * We include a .050 hex driver that makes installation and removal a breeze. Up to 23 9mm and 20 40. cal rounds with the extra capacity follower kit. Comes with an extra power spring. Blue 1.40 oz

SP019-BLUE

In stock

$35.00

Springer Precision Sig P320 EZ .375" Base Pad - Square Hole - Red

Springer Precision Sig P320 EZ .375" Base Pad - Square Hole - Red

Sig P320 9/40 extended base pads are CNC machined from aluminum and hard anodized. This lengthens the magazine .375" to make for easier, more reliable magazine changes. They also allow you to use a magwell without adding capacity to the magazines. They are perfect for IDPA ESP and USPSA. Red. 1.08 OZ Square hole.


These pads use the newer generation magazines that use a square-style locking floortab/basepad. The older generation use a round nipple-style locking insert. If you have this style, you need SP0212, round hole type.

SP0211-RED

In stock

$18.50

Sig Sauer P250/320 Grip 9/40/357 Compact - Large Grip

Sig Sauer P250/320 Grip 9/40/357 Compact - Large Grip

Factory Sig Sauer P250/P320 Grip Module allows the shooter to tailor the pistol to meet their specific grip size requirements. Black polymer construction and comes with the magazine catch installed. This is the large grip for the 9mm, .40S&W and .357SIG P250/P320 Compact. New style grip module with picatinny rail. Only new style P250 magazines will fit this module.

*Note: These are the updated Grip Modules these Grip Modules are NOT compatible with the older style slide catch lever.

1300024

In stock

$39.95

Sig Sauer P320 Sub-Compact Replacement Barrel - 9mm

Sig Sauer P320 Sub-Compact Replacement Barrel - 9mm

Replacement barrel for your P320 Subcompact 9mm. These are factory Sig Sauer drop-in barrels. Not for use in a 357SIG or .40S&W Slide. Black finish.

* NOTE * All barrels may require minor fitting.

BBL-MOD-SC-9

In stock

$169.99

Sig Sauer P250/320 Grip 9/40/357 Full Size - Large Grip

Sig Sauer P250/320 Grip 9/40/357 Full Size - Large Grip

Factory Sig Sauer P320 Grip Module allows the shooter to tailor the pistol to meet their specific grip size requirements. Black polymer construction and comes with the magazine catch installed. This is the Large grip for the 9mm, .40S&W and .357SIG P320 Full Size.

*Note: These are the updated Grip Modules these Grip Modules are NOT compatible with the older style slide catch lever.

1300099

In stock

$39.95

Bar-Sto Threaded Barrel - Sig P320 Full-Size 9mm 1/2x28

Bar-Sto Threaded Barrel - Sig P320 Full-Size 9mm 1/2x28

Bar-Sto Semi Fit threaded barrel for the Sig Sauer P320 9mm full-size handgun. Features stainless steel construction, 1/2x28 threads and an included thread cap. Suppress your Sig P320 using a Bar-Sto Precision Machine barrel!

* May require minor fitting by a qualified gunsmith

BS-BBL-P320-F-9-TB

In stock

$320.00

Grayguns Sig Sauer P320 Hard Duty Use Trigger - Curved

Grayguns Sig Sauer P320 Hard Duty Use Trigger - Curved

The Grayguns P320ST and P320CT triggers are specifically designed for guns that have gone through SIG Sauer’s® Voluntary Upgrade Program. The trigger is available in your choice of straight-face or curved-face design.

The Grayguns P320 trigger yields superior trigger pull results while supporting the voluntary upgrade’s enhanced reliability and rough handling performance qualities. It is designed for drop-in installation.

P320 Trigger – Straight or Curved – Specifications and Features

  • Specifically intended for use only in P320s that have gone through SIG’s Voluntary Upgrade Program.
  • Reduces total trigger pull weight approximately 2 pounds below factory-stock for the standard series, and about 1.25 pounds for the X-Five variant.
  • Designed for use with the SIG factory trigger bar spring
  • Minimal over-travel, stops at optimum trigger face angle
  • Smoother takeup and release sensation
  • Preserves factory sear engagement and mechanical safety values
  • Proven reliable and durable for high-volume professional use
  • Our triggers are externally comparable in appearance to the factory part
  • Limited lifetime warranty on materials and workmanship

Fits all variations within the P320 (upgraded) system. Including all sizes, TACOPS Carry, X-VTAC, X-Carry, X-Five and RX versions.

This trigger was previously described as our Practical Enhanced Leverage Trigger (PELT).


TRG-SIG-320-CT

In stock

$89.00

Sig Sauer P320 Gun Parts

Shopping for Sig Sauer P320 parts? You have arrived at the right place! Top Gun Supply is your best source for all things SIG. We stock a huge selection of factory Sig Sauer parts to keep your gun up and running at its optimal performance level. We are here for you and promise to provide the best service you will find on the internet. We have certified Sig Sauer P320 Armorers on staff that can answer your questions and help you to determine what gun parts you may need. Our unique connection to the factory allows us to serve you better and to provide you with the hard to find parts. We will get them to you fast in order to reduce down time on your weapon. When you need to rely on your firearm, buy a Sig Sauer!