AR-15 UPPER RECEIVER PARTS

AR-15 UPPER RECEIVER PARTS

Products

Gemtech Suppressed Bolt Carrier - 5.56mm

Gemtech Suppressed Bolt Carrier - 5.56mm

The GEMTECH Suppressed Bolt Carrier is a drop-in replacement and will allow the shooter to choose between suppressed (S) and unsuppressed (U) settings without any permanent modifications to the firearm. No longer will you need to change gas blocks, buffers, or any other components. Not only that, but with the GEMTECH Suppressed Bolt Carrier, there is a reduction in carrier speed and less felt recoil, bringing the cyclic rate of the suppressed rifle down to unsuppressed levels. And in some systems, testing has shown that it can actually bring it LOWER than unsuppressed levels.

NOTE: This carrier is designed to operate with full power 5.56 and 300BLK ammunition, and will not cycle with subsonic ammo.
While it can be used for subsonic 300BLK, more reliable cycling is had in the Unsuppressed setting when using subsonic 300BLK ammo.

12215

Out of stock

Out of stock
Knights Armament SR15 Bolt Assembly

Knights Armament SR15 Bolt Assembly

Knights SR15 Bolt Assembly with enhanced round lugs which reduce chipping, cracking and snapping, thereby increasing the life of the bolt substantially. Proprietary to the SR-15 E3 IWS rifle with rounded bolt lugs.

20434

Out of stock

Out of stock
Knights Armament SR15 Field Repair Kit (New Style)

Knights Armament SR15 Field Repair Kit (New Style)

Knights Field Repair Kit for SR15 pattern rifles. Contains Firing Pin, Firing Pin Retaining Pin, Cam pin, Ejector, Ejector Spring, Ejector Retaining Pin,Extractor, 2-Extractor Springs, Extractor Pivot Pin, 3-Gas Rings.

23339-1

Out of stock

Out of stock
Rainier Arms Raptor AR15/M4 5.56 Ambidextrous Charging Handle - Matte Black

Rainier Arms Raptor AR15/M4 5.56 Ambidextrous Charging Handle - Matte Black

Rainier Arms Radian Raptor ambidextrous charging handle made by AXTS.

Rainier ArmsRadian Raptor ambidextrous charging handle by AXTS. The Raptor™ is truly revolutionary in design & function. From rapid palm “blading” or finger thumb charges of the weapon, the motion is fluid & fast from either strong or support side. Made in the USA from aircraft grade 7075 aluminum and milspec anodized.

R0001

Out of stock

Out of stock
Sig Sauer Tread Ambidextrous Charging Handle

Sig Sauer Tread Ambidextrous Charging Handle

Factory replacement charging handle for the TREAD. A full ambidextrous design allowing for left or right hand operation with medium sized latches and a dual roll pin design. Made for extended use with aircraft grade aluminum.

KIT-TRD-CHARGING-HANDLE

Out of stock

Out of stock
Timber Creek Enforcer Ambi Charging Handle - BLK

Timber Creek Enforcer Ambi Charging Handle - BLK

The Enforcer Ambidextrous Charging Handle is a drop-in replacement for mil-spec charging handles. Oversized levers allow for easy access and fluid operation no matter what optic is mounted above it. Featuring our Patent Pending Roller Bearing Technology, this charging handle smoothly and effortlessly unlatches when manipulated from either side of the weapon regardless of you dominate hand. CNC machined out of aircraft grade billet aluminum

E-AMBI-CH-BL

Out of stock

Out of stock
White Label Armory AR15 Buffer Retainer Spring

White Label Armory AR15 Buffer Retainer Spring

White Label Armory AR15 Buffer Retainer Spring.
  • Manufactured to milspec dimensions
  • For use on M16, AR15, and AR10, style firearms
  • 100% USA Made

4011-1900-008

Out of stock

Out of stock
White Label Armory AR15 Cam Pin

White Label Armory AR15 Cam Pin

White Label Armory AR15 Cam Pin. Made to the milspec print dimensions, our cam pins are perfect for a custom build, or to keep on hand as a spare. H&M Black Nitride finish ensures a long life and easy cleaning.
  • Fits all standard AR15/M16 sized bolts
  • Nitride finish for durability and corrosion resistance
  • Machined to mil-spec dimensions
  • 100% USA Made

2004-0301-001

Out of stock

Out of stock
White Label Armory AR15 Extractor Spring

White Label Armory AR15 Extractor Spring

White Label Armory AR15 Extractor Spring. Considered a "wear" item with a limited service life, extractor springs are an item you should always keep on hand. Order a few to ensure that you never have issues with extraction!
  • Fits all standard AR15/M16 sized bolts
  • Replace your worn out springs and increase reliability
  • Standard duty version
  • Manufactured to mil-spec dimensions
  • 100% USA Made

2004-1900-001

Out of stock

Out of stock
White Label Armory AR15 Firing Pin Retaining Pin

White Label Armory AR15 Firing Pin Retaining Pin

White Label Armory AR15 Firing Pin Retaining Pin.
  • Fits all standard AR15/M16 sized carriers
  • Not just a standard cotter pin. Correctly formed and final machined.
  • Phosphate finish for durability and corrosion resistance
  • Manufactured to mil-spec dimensions
  • 100% USA Made

2024-2207-001

Out of stock

Out of stock
White Label Armory AR15 MLOK Handguard 15" - BLK

White Label Armory AR15 MLOK Handguard 15" - BLK

Machined in house from our custom 6061-T6 extrusion, White Label's house brand free float hand guards will provide you with a lifetime of service. Unlike many manufacturers who simply cut holes and slots in their extrusion, White Label machines every surface of the exterior to ensure a uniform and flat surface. Our 4140 steel barrel nut does not need to be indexed for gas tube clearance, and installs with a standard castle nut wrench. No custom made tooling required. Lifetime Guarantee.
  • Machined from 6061-T6 aluminum
  • Hard coat anodized per milspec
  • 4140 steel barrel nut
  • Top rail length: 15.0 inches
  • Weight with mounting hardware: 11.3 ounces
  • MLOK mounting points at 3:00, 6:00, and 9:00

4005-1009-101

Out of stock

Out of stock
White Label Armory M16 / AR15 Extractor - 5.56

White Label Armory M16 / AR15 Extractor - 5.56

White Label Armory M16 / AR15 Extractor - 5.56. Yet another piece that can leave you in a bind if it breaks. Keep an extra around to keep you and your buddies in the action!
  • Fits all standard AR15/M16 5.56 & .223 bolts
  • Machined from 4140 bar stock
  • Heat treated
  • Shot peened
  • Phosphate coated for reliability
  • 100% USA Made

2020-0307-001

Out of stock

Out of stock
White Label Armory M16 Bolt Carrier Group - 5.56 Billet Extractor 9310 Bolt - Black Nitride

White Label Armory M16 Bolt Carrier Group - 5.56 Billet Extractor 9310 Bolt - Black Nitride

White Label's house made M16 bolt carrier group is the perfect BCG for your next build. Properly built, no corners cut, 100 percent US made. With our lifetime guarantee, you can't go wrong.
  • 8620 M16 style carrier
    • H&M Black Nitride finish
    • Properly heat treated
    • Final grind before plating
  • 9310 5.56/.223 bolt
    • Heat treated
    • Shot peened
    • H&M Black Nitride finish
    • MPI
  • 4140 billet gas key
    • H&M Black Nitride Finish
    • Properly seated with Grade 8 fasteners
    • Properly staked to ensure reliability
  • 4140 Cam Pin nitride treated for wear resistance
  • Billet Machined Extractor
    • Machined from solid 4140 bar stock, heat treated and shot peened
    • Phosphate coated for reliable extraction
    • Extractor insert included
    • O-Ring included
  • Firing pin precision machined from 17-4 H-900 Stainless Steel
  • 100% USA Made

2009-0701-001

Out of stock

Out of stock