AR-15 UPPER RECEIVER PARTS

AR-15 UPPER RECEIVER PARTS

Products

Timber Creek Outdoors Low Profile Gas Block

Timber Creek Outdoors Low Profile Gas Block

Timber Creek Outdoors Low Profile .750 Diameter Gas Block

LP-GB-750

In stock

$24.95

White Label Armory AR15 MLOK Handguard 10" - BLK

White Label Armory AR15 MLOK Handguard 10" - BLK

Machined in house from our custom 6061-T6 extrusion, White Label's house brand free float hand guards will provide you with a lifetime of service. Unlike many manufacturers who simply cut holes and slots in their extrusion, White Label machines every surface of the exterior to ensure a uniform and flat surface. Our 4140 steel barrel nut does not need to be indexed for gas tube clearance, and installs with a standard castle nut wrench. No custom made tooling required. Lifetime Guarantee

AR15 / M16 Hand Guard - 10" MLOK

  • Machined from 6061-T6 aluminum
  • Hard coat anodized per milspec
  • 4140 steel barrel nut
  • Top rail length: 9.85 inches
  • Weight with mounting hardware: 8.6 ounces
  • MLOK mounting points at 3:00, 6:00, and 9:00

4005-1009-103

In stock

$109.95

White Label Armory AR15 MLOK Handguard 15" - BLK

White Label Armory AR15 MLOK Handguard 15" - BLK

Machined in house from our custom 6061-T6 extrusion, White Label's house brand free float hand guards will provide you with a lifetime of service. Unlike many manufacturers who simply cut holes and slots in their extrusion, White Label machines every surface of the exterior to ensure a uniform and flat surface. Our 4140 steel barrel nut does not need to be indexed for gas tube clearance, and installs with a standard castle nut wrench. No custom made tooling required. Lifetime Guarantee.
  • Machined from 6061-T6 aluminum
  • Hard coat anodized per milspec
  • 4140 steel barrel nut
  • Top rail length: 15.0 inches
  • Weight with mounting hardware: 11.3 ounces
  • MLOK mounting points at 3:00, 6:00, and 9:00

4005-1009-101

In stock

$139.95

Aero Precision AR-15 Upper Parts Kit

Aero Precision AR-15 Upper Parts Kit

Aero Precision upper parts kit includes the parts you need to assemble your AR15 upper receiver.

Includes:

  • Forward Assist Assembly
  • Forward Assist Spring
  • Forward Assist Roll Pin
  • Ejection Port Cover Door
  • Ejection Port Cover Rod with c-clip
  • Ejection Port Cover Spring

APRH100270

Out of stock

Out of stock
Aero Precision AR10 .308/7.62 Complete Bolt Carrier Group - Black Nitride

Aero Precision AR10 .308/7.62 Complete Bolt Carrier Group - Black Nitride

Precision built!


Carrier Features:

  • Material: Billet carrier machined from 8620 steel and case hardened
  • Finish: Black Nitride - advanced lower friction coating that minimizes the need for lubricants and cleaning
  • Gas Key: 4130 Steel attached with Grade 8 hardware and properly staked
  • Firing Pin: Machined from 8740 steel and hard chrome coated
  • Forward Assist serrations
  • Laser engraved Aero Precision logo
  • Carrier fits DPMS compatible style AR Rifles

Bolt Features:

  • Material: Case Hardened 9310 Steel
  • Finish: All bolt components are shot peened and black nitride coated
  • Extractor: Machined from 4340 Steel with double o-rings and double springs
  • Magnetic Particle Inspected and High Pressure Tested
  • High pressure bolt - external surfaces are CNC ground after heat treat for a precision fit and firing pin hole diameter is reduced to .070"
  • Multi-caliber bolt designed to function with .308, 7.62x51, 6.5 Creedmoor, .338 Federal and other .308 based cartridges.

APRH308186

Out of stock

Out of stock
Aero Precision AR15 5.56 Complete Bolt Carrier Group - Black Nitride

Aero Precision AR15 5.56 Complete Bolt Carrier Group - Black Nitride

Features:

  • M16-cut carrier
  • Machined from 8620 steel
  • Carrier has forward assist serrations
  • Black Nitride Finish - advanced lower friction coating that minimizes the need for lubricants and cleaning
  • Properly staked gas key
  • Chrome lined gas key and firing pin channel
  • Machined from Carpenter 158 tool steel
  • Shot peened
  • HPT/MPI and marked
  • Black o-ring insert on extractor

APRH100615C

Out of stock

Out of stock
Aero Precision AR15 5.56 Complete Bolt Carrier Group - Nickel Boron

Aero Precision AR15 5.56 Complete Bolt Carrier Group - Nickel Boron

Aero Precision's upgraded nickel boron bolt carrier group is an eye catching addition to your AR build. Mil-spec dimensions and coating ensure the highest quality and correct component interface.
  • Machined from 8620 Tool Steel (Carrier) and 9310 Steel (Bolt)
  • Carrier has forward assist serrations
  • Shrouded firing pin
  • Nickel Boron Coating inside and out (Bolt, Carrier, and Gas Key)
  • Forged Mil-Spec gas key attached with Grade 8 hardware and Properly staked.
  • 5.56 Bolt is shot Peened and MPI
  • Mil-Spec Extractor Spring, black extractor insert, Viton O-Ring
  • Tool Steel Extractor
  • High quality BCG

APRH100070C

Out of stock

Out of stock
Aero Precision AR15 5.56 Complete Bolt Carrier Group - Phosphate

Aero Precision AR15 5.56 Complete Bolt Carrier Group - Phosphate

Features:

  • M16-cut carrier
  • Machined from 8620 steel
  • Carrier has forward assist serrations
  • Mil-Spec Phosphate Coating
  • Properly staked gas key
  • Chrome lined gas key and firing pin channel
  • Machined from Carpenter 158 tool steel
  • Shot peened
  • HPT/MPI and marked
  • Black o-ring insert on extractor

APRH1000019C

Out of stock

Out of stock
Aero Precision Low Profile Gas Block .750

Aero Precision Low Profile Gas Block .750

Aero's Low Profile .750 Gas Block is constructed from 4150 hardened steel with steel set screws which are 10-32 x 3/16 knurled cup point. *Note: Roll pin is not included.

APRH100122C

Out of stock

Out of stock
Bravo Company Gunfighter Charging Handle Mod 3B - Large Latch

Bravo Company Gunfighter Charging Handle Mod 3B - Large Latch

Charging Handle forged from 7075 T6 Aluminum

Hard Coat Anodized per Mil-A-8625F, Type III, Class 2
The Mod 3B latch extends past the main body of the charging handle by approximately 1.14".
For comparison a USGI handle latch extended past the main body of the charging handle by approximately .85"


Compatible with Mil-Spec AR-15 Direct Impingement Weapon Systems.

**NOT compatible with adjustable gas keyed bolt carrier groups.**
Driven by over a decade of feedback from real-world combat operations, BCM® has made continual design refinements and structural improvements to the charging handle in the M4 and M16 to address the current manual of arms for the weapon system.
Optimizing the contours into a snag-free profile that facilitates immediate manipulation with an end user’s reaction side grip. The range of BCMGUNFIGHTER™ Charging Handles is available with both ambidextrous and MIL-SPEC controls.
Redesigned to eliminate the load on the pivot pin (like USGI handle fitted with an extended latch) and keep the energy from charging close the centerline of the carbine/rifle, BCMGUNFIGHTER™ Charging Handles provides an larger uninterrupted engagement surface with a smaller silhouette.

BCM-GFH-MOD3B-556

Out of stock

Out of stock
Bravo Company Gunfighter Charging Handle Mod 4B - Medium Latch

Bravo Company Gunfighter Charging Handle Mod 4B - Medium Latch

Charging Handle forged from 7075 T6 Aluminum
Hard Coat Anodized per Mil-A-8625F, Type III, Class 2
The Mod 4B latch extends past the main body of the charging handle by approximately .91".

For comparison a USGI handle latch extended past the main body of the charging handle by approximately .85"

Compatible with Mil-Spec AR-15 Direct Impingement Weapon Systems.

**NOT compatible with adjustable gas keyed bolt carrier groups.**
Driven by over a decade of feedback from real-world combat operations, BCM® has made continual design refinements and structural improvements to the charging handle in the M4 and M16 to address the current manual of arms for the weapon system.
Optimizing the contours into a snag-free profile that facilitates immediate manipulation with an end user’s reaction side grip. The range of BCMGUNFIGHTER™ Charging Handles is available with both ambidextrous and MIL-SPEC controls.
Redesigned to eliminate the load on the pivot pin (like USGI handle fitted with an extended latch) and keep the energy from charging close the centerline of the carbine/rifle, BCMGUNFIGHTER™ Charging Handles provides a larger uninterrupted engagement surface with a smaller silhouette.

BCM-GFH-MOD4B-556

Out of stock

Out of stock
CMMG Charging Handle Assembly 22ARC

CMMG Charging Handle Assembly 22ARC

Specifically designed for use with 22 AR-Conversions to prevent spent casings from becoming lodged between the bolt and charging handle. Nylon construction.

22BA596

Out of stock

Out of stock
Daniel Defense .750 Clamp Low Profile Gas Block

Daniel Defense .750 Clamp Low Profile Gas Block

The Daniel Defense low profile gas block mounts directly to .750 diameter barrels and is made of 4150 hardened steel with a Mil-Spec phosphate coating for enhanced durability. Made in the U.S.A.

25-079-05006

Out of stock

Out of stock
Daniel Defense AR15 Bolt Assembly - 5.56mm/300 Blackout

Daniel Defense AR15 Bolt Assembly - 5.56mm/300 Blackout

The Daniel Defense 5.56mm/300 Blackout Bolt Assembly features a shot peened bolt with extractor booster. Made in the U.S.A.

04-013-22183

Out of stock

Out of stock
Daniel Defense Complete Bolt Carrier Group - 5.56mm

Daniel Defense Complete Bolt Carrier Group - 5.56mm

The Daniel Defense Bolt Carrier Group features a shot peened bolt with extractor booster. The Bolt Carriers are chrome lined, and have properly staked gas keys. Made in the U.S.A.

04-013-19032

Out of stock

Out of stock
Gemtech Suppressed Bolt Carrier - 5.56mm

Gemtech Suppressed Bolt Carrier - 5.56mm

The GEMTECH Suppressed Bolt Carrier is a drop-in replacement and will allow the shooter to choose between suppressed (S) and unsuppressed (U) settings without any permanent modifications to the firearm. No longer will you need to change gas blocks, buffers, or any other components. Not only that, but with the GEMTECH Suppressed Bolt Carrier, there is a reduction in carrier speed and less felt recoil, bringing the cyclic rate of the suppressed rifle down to unsuppressed levels. And in some systems, testing has shown that it can actually bring it LOWER than unsuppressed levels.

NOTE: This carrier is designed to operate with full power 5.56 and 300BLK ammunition, and will not cycle with subsonic ammo.
While it can be used for subsonic 300BLK, more reliable cycling is had in the Unsuppressed setting when using subsonic 300BLK ammo.

12215

Out of stock

Out of stock
HK Gas Piston Complete MR556, MR762

HK Gas Piston Complete MR556, MR762

Heckler & Koch complete gas piston for MR556 and MR762 rifles.

205381

Out of stock

Out of stock
Knights Armament SR15 Bolt Assembly

Knights Armament SR15 Bolt Assembly

Knights SR15 Bolt Assembly with enhanced round lugs which reduce chipping, cracking and snapping, thereby increasing the life of the bolt substantially. Proprietary to the SR-15 E3 IWS rifle with rounded bolt lugs.

20434

Out of stock

Out of stock