Timber Creek Outdoors Enforcer AR Pistol Grip is a drop in replacement that mounts to any standard mil spec lower receiver. Weighing in at just over 4oz it does not add unnecessary weight to your rifle. This skeletonized grip is CNC machined from a solid block of aircraft grade billet aluminum.

Timber Creek Outdoors Enforcer Mini Angled Foregrip will mount to any US manufactured M-LOK system. Used as a hand stop when shooting with the thumb over/forward method, this angled foregrip allows you to control your muzzle when rapidly moving from target to target. CNC machined out of aircraft grade billet aluminum. Weighs under 1.5oz.

• Mounted in forward angle increases rigidity of forearm, while providing more natural wrist angle when grabbing the vertical grip.
• Mounted in reverse angle to increase control when grabbing handguard and vertical grip.
• Flat sides give better yaw control to the shooter during firing and non-firing manipulations.
• Aggressive texture and generous storage volume combined with modular design to allow improvements and adaptation in the future.
• Cross bolt designed to work with improvised tools (such as a quarter) allow for easy adjustment or re-tightening.
• Hinged trap door offering storage inside the grip with a water resistant rubber gasket.
• Reversible clamps allow user to setup fasteners to reside on either side.
• Spring-loaded clamp makes installation and removal easier.
• Made in the USA and manufactured from high quality impact resistant polymers.

• Mounted in forward angle increases rigidity of forearm, while providing more natural wrist angle when grabbing the vertical grip.
• Mounted in reverse angle to increase control when grabbing handguard and vertical grip.
• Flat sides give better yaw control to the shooter during firing and non-firing manipulations.
• Aggressive texture and generous storage volume combined with modular design to allow improvements and adaptation in the future.
• Cross bolt designed to work with improvised tools (such as a quarter) allow for easy adjustment or re-tightening.
• Hinged trap door offering storage inside the grip with a water resistant rubber gasket.
• Reversible clamps allow user to setup fasteners to reside on either side.
• Spring-loaded clamp makes installation and removal easier.
• Made in the USA and manufactured from high quality impact resistant polymers.

The Magpul M-LOK AFG (Angled Fore Grip) is the result of research and refinements done to the original AFG and AFG-2. By integrating the direct-attach M-LOK mounting system with minimalist construction we were able to produce a high strength grip that only weighs 1.2 ounces, including hardware. Allowing for a wider range of mounting location options, the M-LOK AFG is ¾" shorter than the AFG-2 while maintaining a similar gripping surface area. Even though the M-LOK AFG is more compact than its predecessors it continues to take into account natural body mechanics to provide a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the M-LOK AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. Made in U.S.A.

The M-LOK Hand Stop Kit serves as a light weight, low-profile M-LOK slot index point for improved weapon control, or as a forward stop to prevent the shooter’s hand from reaching the hot front sight assembly or muzzle. The kit includes one M-LOK Hand Stop, one M-LOK Index Panel, and one M-LOK Rail Cover Type 2 for the individual user to configure their kit as they desire. Also included in this kit is an adapter for use with Magpul M-LOK equipped polymer Hand Guards/Forends as well as other wider profile aluminum hand guards. Made in U.S.A.

The M-LOK Hand Stop Kit serves as a light weight, low-profile M-LOK slot index point for improved weapon control, or as a forward stop to prevent the shooter’s hand from reaching the hot front sight assembly or muzzle. The kit includes one M-LOK Hand Stop, one M-LOK Index Panel, and one M-LOK Rail Cover Type 2 for the individual user to configure their kit as they desire. Also included in this kit is an adapter for use with Magpul M-LOK equipped polymer Hand Guards/Forends as well as other wider profile aluminum hand guards. Made in U.S.A.

Timber Creek Outdoors Enforcer AR Pistol Grip is a drop in replacement that mounts to any standard mil spec lower receiver. Weighing in at just over 4oz it does not add unnecessary weight to your rifle. This skeletonized grip is CNC machined from a solid block of aircraft grade billet aluminum.

Timber Creek Outdoors Enforcer AR Pistol Grip is a drop in replacement that mounts to any standard mil spec lower receiver. Weighing in at just over 4oz it does not add unnecessary weight to your rifle. This skeletonized grip is CNC machined from a solid block of aircraft grade billet aluminum.

Timber Creek Outdoors direct mount M-LOK vertical foregrip is designed with multiple uses in mind. It can be used as a standard vertical foregrip as well as a hand stop when shooting with the thumb over/thumb forward method. Weighing in at 2.9 Oz the Enforcer allows you to control your muzzle without adding unnecessary weight. CNC machined out of aircraft grade billet aluminum.

Timber Creek Outdoors direct mount M-LOK vertical foregrip is designed with multiple uses in mind. It can be used as a standard vertical foregrip as well as a hand stop when shooting with the thumb over/thumb forward method. Weighing in at 2.9 Oz the Enforcer allows you to control your muzzle without adding unnecessary weight. CNC machined out of aircraft grade billet aluminum.

The Enforcer will mount to any Picatinny rail and is designed with multiple uses in mind. It can be used as a standard vertical foregrip as well as a hand stop when shooting with the thumb over/thumb forward method. Weighing in at 2.9 Oz the Enforcer allows you to control your muzzle without adding unnecessary weight. CNC machined out of aircraft grade billet aluminum.

Low Profile Hand Stop for M-LOK handguards can be used as an indexing point for consistent hand placement and better control or as a traditional hand stop preventing your off hand from extending past the muzzle. CNC machined out of aircraft grade billet aluminum.

Low Profile Hand Stop for M-LOK handguards can be used as an indexing point for consistent hand placement and better control or as a traditional hand stop preventing your off hand from extending past the muzzle. CNC machined out of aircraft grade billet aluminum.

Ergo Grip TACTICAL DELUXE grip for AR15 rifles. Palm swell profile. Rubber overmolding provides a sure grip and comfort.

Rubber Hogue grips with finger grooves for AR-15/M-16 rifles. This is an overmolded design of the AR15 grip providing enhanced comfort and a positive, secure hold.

The Magpul M-LOK AFG (Angled Fore Grip) is the result of research and refinements done to the original AFG and AFG-2. By integrating the direct-attach M-LOK mounting system with minimalist construction we were able to produce a high strength grip that only weighs 1.2 ounces, including hardware. Allowing for a wider range of mounting location options, the M-LOK AFG is ¾" shorter than the AFG-2 while maintaining a similar gripping surface area. Even though the M-LOK AFG is more compact than its predecessors it continues to take into account natural body mechanics to provide a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the M-LOK AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. Made in U.S.A.

Timber Creek Outdoors Enforcer Mini Angled Foregrip will mount to any US manufactured M-LOK system. Used as a hand stop when shooting with the thumb over/forward method, this angled foregrip allows you to control your muzzle when rapidly moving from target to target. CNC machined out of aircraft grade billet aluminum. Weighs under 1.5oz.