LBE Unlimited Mil-Spec Buffer Tube Kit with 6 position capability with a mil-spec diameter retractable stock. This kit includes the Mil-Spec buffer tube, castle nut, lock plate, recoil buffer, and recoil spring. Made in the USA!

The Magpul Ambidextrous Sling Attachment Point (ASAP) allows for a range of motion greater that 180 degrees, allowing for easy right or left hand weapon manipulation. Replaces the standard AR15 Carbine stock receiver end plate and works with single point type slings with snap hook style attachment. Compatible with both commercial and mil-spec buffer tubes. Made from precision cast black manganese phosphatized steel.

Aero Precision lowers are precision machined to mil-spec dimensions, and work with standard AR15 components to ensure the highest quality with a correct component interface.

Gen 2 Features

• Upper Tension Screw - Allows users to fine tune the fit of the upper and lower receiver through the use of a nylon tipped tensioning set screw inserted in the grip tang of the lower receiver. This provides a tight fit with any standard AR15 upper receiver.
• Increased Magwell Flare - Allows for easier insertion of magazines and provides a sleeker look.

The Magpul B.A.D. Battery Assist Device is a quick and easy modification to AR-15 / M-16 rifles that allows the shooter access to the bolt catch from the right side of the receiver. This provides easy operation without shifting your grip on the rifle to close the bolt. Includes B.A.D. Lever assembly with Torx wrench.

Rock River Arms semi-auto AR15 forged lower receiver assembly complete with a six postition collapsible stock and a standard single stage trigger. Lower is mil spec and uses standard take-down and fire control pins. Receiver is mil-spec hard coat anodized aircraft grade 7075 T6 aluminum, matte black finish.

* Must ship to an FFL Dealer *

Aero Precision lowers are precision machined to mil-spec dimensions, and work with standard AR15 components to ensure the highest quality with a correct component interface. Blemished lower with lower parts kit.

Gen 2 Features

• Upper Tension Screw - Allows users to fine tune the fit of the upper and lower receiver through the use of a nylon tipped tensioning set screw inserted in the grip tang of the lower receiver. This provides a tight fit with any standard AR15 upper receiver.
• Increased Magwell Flare - Allows for easier insertion of magazines and provides a sleeker look.

Blemishes May Include

• Plating inconsistencies
• Pits
• Scratches
• Dents
• Flaws in finish

• Mil-Spec 7075-T6 Aluminum Buffer Tube, 6-position
• Carbine buffer
• Buffer spring
• End plate and lock nut
• Made in the USA
• Stock Not Included

CMMG LPK Lower Receiver Parts Kit. Includes all of the parts to build your lower.

DPMS Panther Arms AR-15 Field Repair Kit contains: LR-22 Trigger Spring, BT-07 Extractor, BT-08 Extractor Spring Assembly, LR-31 Disconnector Spring, LR-32 Hammer Spring, BT-03 Extractor Pin, BT-16 Firing Pin Retaining Pin, BT-14 Firing Pin, BT-05 Ejector, and BT-06 Ejector.

Aero Precision lowers are precision machined to mil-spec dimensions, and work with standard AR15 components to ensure the highest quality with a correct component interface. FDE Cerakote Finish.

Gen 2 Features

• Upper Tension Screw - Allows users to fine tune the fit of the upper and lower receiver through the use of a nylon tipped tensioning set screw inserted in the grip tang of the lower receiver. This provides a tight fit with any standard AR15 upper receiver.
• Increased Magwell Flare - Allows for easier insertion of magazines and provides a sleeker look.

Aero Precision lowers are precision machined to mil-spec dimensions, and work with standard DPMS 308 components and magazines to ensure the highest quality with a correct component interface.

Features:

• Rear takedown pin detent hole is threaded for a 4-40 set screw
• Bolt catch is threaded for a screw pin (no roll pin needed)
• Integrated trigger guard
• Selector markings will work with 45, 60 or 90 degree safety selectors
• Accepts Battle Arms Development short throw safety selectors, but will work with any standard selector
• No gap with aftermarket pistol grips

Includes:

• M5 Lower Receiver - Anodized Black
• B5 Systems BRAVO Stock - Black
• B5 Systems P-Grip 23 - Black
• M5 .308 Specific Lower Parts Kit
• Receiver Extension
• .308 Carbine Buffer and Spring

The Daniel Defense Furniture Set includes an ergonomically enhanced pistol grip, vertical grip, and buttstock. The precision molded buttstock features a comfortable rubber molded cheek-piece, ergonomic latch, interchangeable butt pads and an integrated ambidextrous QD attachment point. Fits Mil-Spec receiver extension tubes. The ergonomic pistol grip shares the same grip angle as the venerable 1911 and incorporates an oversized trigger guard covering the gap between grip and lower receiver which can wear on the shooters hand and easily accommodates for gloves. The improved vertical grip features comfortable rubber overmolding for a solid grip wet or dry as well as a dual O-ring watertight storage compartment at the base of the grip.

LBE Unlimited Mil-Spec Buffer tube with 6 position capability with a mil-spec diameter retractable stock. 6061 Aluminum. Made in the USA!

Rock River Arms semi-auto AR15 forged lower receiver assembly complete with a six postition collapsible stock and a National Match two stage trigger. Lower is mil spec and uses standard take-down and fire control pins. Receiver is mil-spec hard coat anodized aircraft grade 7075 T6 aluminum, matte black finish.

* Must ship to an FFL Dealer *

Aero Precision lowers are precision machined to mil-spec dimensions, and work with standard AR15 components to ensure the highest quality with a correct component interface.

Includes:

• AR15 Gen 2 Lower Receiver - Anodized Black
• B5 Systems BRAVO Stock - Black
• B5 Systems Pistol-Grip - Black
• B5 Systems Polymer Trigger Guard - Black
• Standard Lower Parts Kit
• Receiver Extension
• AR15 Carbine Buffer and Spring

Upper Receiver Features:

• Machined from 7075-T6 forged aluminum
• M4 Feedramps
• .250” takedown pin holes
• Works with standard AR15 components

Lower Receiver Features:

• Machined from 7075-T6 forged aluminum
• Upper Tension Screw
• Flared Magwell
• Rear takedown pin detent hole is threaded for a 4-40 set screw
• Works with standard AR15 components and magazines

Upper Receiver Features:

• Machined from 7075-T6 forged aluminum
• Coating:FDE Cerakote finish
• M4 Feedramps
• .250” takedown pin holes
• Accepts standard AR15/M16 components

Lower Receiver Features:

• Machined from 7075-T6 forged aluminum
• Coating:Magpul™ FDE Cerakote finish
• Works with standard AR15 components and magazines
• Rear takedown pin detent hole is threaded for a 4-40 set screw

CMMG, Inc MOD4SA semi-auto AR15 stripped forged lower receiver. Lower is mil spec and uses standard take-down and fire control pins. Receiver is mil-spec hard coat anodized aircraft grade 7075 T6 aluminum and is Teflon coated for added durability and color consistency. Receivers are RDIAS/RLL compatible.

* Must ship to an FFL Dealer *