AR-15 BARRELS

AR-15 BARRELS

Shop by:

Caliber

Products

Daniel Defense 300 AAC Blackout Barrel, 10.3"

Daniel Defense 300 AAC Blackout Barrel, 10.3"

The Daniel Defense 10.3" 300 Blackout S2W(R) barrel is designed with a strength to weight profile (Daniel Defense's Heavy Barrel), a 1:8" twist rate, and a pistol length gas system. Cold Hammer Forging of barrels has been known for decades to produce the most accurate, longest lasting rifle barrels obtainable. The Cold Hammer Forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. During the hammering process, a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber, the lands, and the grooves. In addition to the aforementioned benefits, the Cold Hammer Forging process creates a defect free bore and the most consistent chamber possible. All Daniel Defense cold hammer forged barrels are made from start to finish in the state-of-the-art facility located in Black Creek, GA. In keeping with the heritage of not cutting corners, all cold hammer forged barrels feature a forged chamber and highest quality exterior coating. Daniel Defense cold hammer forged barrels prove themselves to be more accurate and last longer than a barrel that has cut or button rifling.

36-116-06191-018

In stock

$310.00

Ballistic Advantage 10.5" 5.56 Carbine Length Barrel

Ballistic Advantage 10.5" 5.56 Carbine Length Barrel

This 5.56 chambered 10.5 inch Government Profile Modern Series Barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish and QPQ coated M4 feed ramp extension.

BABL556005M

Out of stock

Out of stock
Ballistic Advantage 14.5" 5.56 Mid Length Government Profile Barrel

Ballistic Advantage 14.5" 5.56 Mid Length Government Profile Barrel

The Ballistics Advantage 14.5" 5.56 Government Profile Midlength AR 15 Modern Series Barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish and QPQ coated M4 feed ramp extension. *All NFA/ATF Rules Apply. You may use this barrel with a lower receiver that is a registered SBR, Machine Gun, or Pistol. Possession of this barrel along with a Non-NFA lower receiver is Prohibited, except when installed on a Pistol configuration firearm.

BABL556010M

Out of stock

Out of stock
Ballistic Advantage 16" 5.56 Midlength Barrel

Ballistic Advantage 16" 5.56 Midlength Barrel

Our 5.56 chambered 16 inch Government Profile Mid-Length Modern Series Barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish and QPQ coated M4 feed ramp extension.

BABL556015M

Out of stock

Out of stock
FN AR-15 HF Barrel 16" - 5.56mm - Carbine Length

FN AR-15 HF Barrel 16" - 5.56mm - Carbine Length

FNH hammer forged, chrome-lined, 1-7" twist, 16" barrel. Each barrel is put through a variety of testing resulting in the highest quality and consistency in every barrel that leaves the factory. Features M4 style feed ramps, and corrosion resistante black manganese phosphate finish. Designed for carbine length gas system.

36421

Out of stock

Out of stock
FN AR-15 HF Barrel 16" - 5.56mm - Mid-Length

FN AR-15 HF Barrel 16" - 5.56mm - Mid-Length

FNH hammer forged, chrome-lined, 1-7" twist, 16" barrel. Each barrel is put through a variety of testing resulting in the highest quality and consistency in every barrel that leaves the factory. Features M4 style feed ramps, and corrosion resistante black manganese phosphate finish. Designed for mid-length gas system.

36422

Out of stock

Out of stock
White Label Armory AR-15 5.56mm Barrel, 10.5"

White Label Armory AR-15 5.56mm Barrel, 10.5"

Produced in house, from raw bar stock to finished product. They drill, ream, rifle, contour, and assemble, with the help of our fully automated and robotic driven production line. All of our barrels are properly stress relieved after rifling, and extensions are torqued after nitride. Our quality control system ensures that all barrels are dimensionally correct and bores fall well within their individual tolerance. You won't find a better barrel at these prices.

10.5" length, chambered in 5.56mm, carbine length gas system, 1:7 RH twist, Black Nitride finish, .067" gas port, weighing 19.7oz and MADE in the USA.

1101-0201-002

Out of stock

Out of stock
White Label Armory AR-15 5.56mm Barrel, 16"

White Label Armory AR-15 5.56mm Barrel, 16"

These AR-15 barrels are manufactured by White Label Armory. Produced from raw bar stock to a finished product. They drill, ream, rifle, contour, and assemble these barrels with a fully automated and robotic driven production line. All of these barrels are properly stress relieved after rifling, and extensions are torqued after nitride. The quality control system ensures that all barrels are dimensionally correct and bores fall well within individual tolerances. You won't find a better barrel at these prices.

  • 16" length
  • 5.56 NATO Chamber
  • Mid-length gas system
  • .750" gas block journal
  • 1:7 RH twist
  • 4150 CMV
  • Stress relieved after rifling
  • Black Nitride finish by H&M
  • M4 extension
  • Weight: 29.0 ounces
  • 100% USA Made

1101-0201-005

Out of stock

Out of stock
Yankee Hill Machine AR-15 Barrel 16" - .300 Blackout - Carbine Length - Fluted

Yankee Hill Machine AR-15 Barrel 16" - .300 Blackout - Carbine Length - Fluted

High quality YHM 1-8" twist AR-15 barrel chambered in 300 AAC Blackout. Built from 4140 chrome moly steel with a threaded muzzle, and features a Melonite coated barrel which provides a thinner surface than chrome-lining, so bore friction is reduced for increased accuracy. Additionally, Melonite is harder than chrome-lining providing a longer wear life. Diamond fluted barrel pattern. 5/8-24" threads.

YHM-70-TF

Out of stock

Out of stock
Yankee Hill Machine AR-15 Barrel 16" - 5.56mm - Carbine Length

Yankee Hill Machine AR-15 Barrel 16" - 5.56mm - Carbine Length

High quality YHM 1-7" twist AR-15 barrel features a 5.56x45mm NATO chamber for full compatibility with surplus mil-spec ammunition or commercial 223 Remington ammunition. Built from 4140 chrome moly steel with a threaded muzzle, and features a Melonite coated barrel which provides a thinner surface than chrome-lining, so bore friction is reduced for increased accuracy. Additionally, Melonite is harder than chrome-lining providing a longer wear life. 1/2-28" threads.

YHM-47-T

Out of stock

Out of stock
Yankee Hill Machine AR-15 Barrel 16" - 5.56mm - Carbine Length - Fluted

Yankee Hill Machine AR-15 Barrel 16" - 5.56mm - Carbine Length - Fluted

High quality YHM 1-7" twist AR-15 barrel features a 5.56x45mm NATO chamber for full compatibility with surplus mil-spec ammunition or commercial 223 Remington ammunition. Built from 4140 chrome moly steel with a threaded muzzle, and features a Melonite coated barrel which provides a thinner surface than chrome-lining, so bore friction is reduced for increased accuracy. Additionally, Melonite is harder than chrome-lining providing a longer wear life. Diamond fluted barrel pattern. 1/2-28" threads.

YHM-47-TF

Out of stock

Out of stock

AR-15 Rifle Barrels

Need a high quality barrel for your rifle build or to improve your factory AR15? We have an excellent selection of 5.56 and 300 Blackout barrels in carbine and mid-length gas systems for your next build. Shop our selection of Yankee Hill Machine or FNH hammer-forged barrels as well as barrel parts.