WILSON COMBAT

WILSON COMBAT

Shop by:

Caliber
Category

Products

Wilson Combat Protector Carbine, 5.56mm 16" - Black Anodize & Stainless

Wilson Combat Protector Carbine, 5.56mm 16" - Black Anodize & Stainless

The new PROTECTOR S is basically the standard PROTECTOR carbine with a glass bead finish on the barrel in place of the black Armor-Tuff we apply to the standard model. Forged upper and lower receiver, WC tactical triggerguard, WC recon profile match grade barrel, mid-length gas system & low profile gas block, 1/2x28 threaded muzzle with Q-Comp, 12.6" M-LOK rail, starburst BCM gunfighter grip, WC/Rogers Super-Stoc, WC TTU M2 (4#) trigger. Ships in soft case with one 30RD magazine.

TRPC556BLS

In stock

$1999.99

Wilson Combat AR Pistol, 5.56x45 NATO 11.3" - OD Green Armor Tuff

Wilson Combat AR Pistol, 5.56x45 NATO 11.3" - OD Green Armor Tuff

The Wilson Combat ARP (AR Pistol) Tactical pistol is an outstanding choice for home or vehicle defense and exhibits the accuracy and attention to detail for which our tactical rifles are known. This AR receiver-based firearm is legally defined as a pistol in most states and uses the time-tested, direct-impingement gas system that has given the classic AR platform a reputation for accuracy and reliability for almost 50 years.

The ARP Tactical uses the same premium Wilson Combat components as our legendary tactical rifles. Features like our famous Tactical Trigger Unit, NP3 Bolt Carrier group, and your choice of time-tested Armor Tuff® finish complete this practical package. This pistol comes upgraded with the Tailhook Pistol brace. The Tailhoook uses a fold out arm for support, as well as a telescoping feature. Ships with one 30 round magazine.

TR-ARP-GN556

Out of stock

Out of stock
Wilson Combat Border Patrol 12GA. Shotgun, Black Armor Tuff

Wilson Combat Border Patrol 12GA. Shotgun, Black Armor Tuff

The Wilson Combat Border Patrol Model 12ga. has been rigorously tested at the U.S. borders under very demanding conditions. Comes with a 3 inch magnum chamber, 18.5" barrel, and an extended magazine tube and a high visibility follower. For fast target aquisition, this shotgun has a Ghost Ring rear sight and ramped tritium front night sight. Includes a padded soft side carry case.



SBP-A-BLACK

Out of stock

Out of stock
Wilson Combat Protector Carbine, 300 Blackout 16.25" - Black Armor Tuff

Wilson Combat Protector Carbine, 300 Blackout 16.25" - Black Armor Tuff

Wilson Combat's Protector Carbine rifle features Mil/Spec forged upper and lower receivers, match grade stainless barrel with Q-Comp flash hider and a mid-length gas system for enhanced reliability and durability with low profile gas block. It utilizes a M-LOK compatible hand-guard with a 4 accessory rail and QD sling mount, nitride coated precision BCG, M2 two-stage TTU trigger and a Wilson/Rogers super-stock buttstock with BCM Starburst pistol grip.

TRPC300BL

Out of stock

Out of stock
Wilson Combat Protector Carbine, 5.56mm 16.25" - Black Armor Tuff

Wilson Combat Protector Carbine, 5.56mm 16.25" - Black Armor Tuff

Wilson Combat's Protector Carbine rifle features Mil/Spec forged upper and lower receivers, match grade stainless barrel with Q-Comp flash hider and a mid-length gas system for enhanced reliability and durability with low profile gas block. It utilizes a M-LOK compatible hand-guard with a 4 accessory rail and QD sling mount, nitride coated precision BCG, M2 two-stage TTU trigger and a Wilson/Rogers super-stoc buttstock with BCM Starburst pistol grip.

TRPC556BL

Out of stock

Out of stock
Wilson Combat Protector Carbine, 5.56mm 16.25" - Tan and Black Armor Tuff

Wilson Combat Protector Carbine, 5.56mm 16.25" - Tan and Black Armor Tuff

Wilson Combat's Protector Carbine rifle features Mil/Spec forged upper and lower receivers, match grade stainless barrel with Q-Comp flash hider and a mid-length gas system for enhanced reliability and durability with low profile gas block. It utilizes a M-LOK compatible hand-guard with a 4 accessory rail and QD sling mount, nitride coated precision BCG, M2 two-stage TTU trigger and a Wilson/Rogers super-stoc buttstock with BCM Starburst pistol grip. Tan and black two tone finish.

TRPC556CT

Out of stock

Out of stock
Wilson Combat Ranger Carbine, 5.56x45 NATO 16" - Black Armor Tuff

Wilson Combat Ranger Carbine, 5.56x45 NATO 16" - Black Armor Tuff

The Ranger series of rifles by Wilson Combat combines our exclusive lightweight billet receiver set and our Ranger profile match-grade, tapered barrel to create a fast-handling precision AR carbine that is an ideal tactical, defense or hunting gun where light weight is a pre-requisite. Our Ranger profile barrel is the lightest profile AR barrel that still retains match-grade accuracy as the rifle heats up from rapid-fire shooting. Like all Wilson Combat custom rifles, the Ranger is equipped with our strong and light M-LOK capable rail and our time-tested Tactical Trigger Unit. A Wilson-SLR click adjustable gas block allows you to easily fine tune your Ranger to the pressure of your specific ammunition used. When you need a handy yet accurate premium tactical rifle the Ranger will lead the way. Equipped with a threaded muzzle and Q-comp break, Bravo Company pistol grip and ships with one 20 round magazine.

TR-RA-BLK

Out of stock

Out of stock
Wilson Combat Special Purpose Rifle, 5.56x45 NATO 18" - Black Armor Tuff

Wilson Combat Special Purpose Rifle, 5.56x45 NATO 18" - Black Armor Tuff

The Special Purpose Rifle is based on the special operations Mark 12 Mod X. The SPR was designed to be an intermediate sniper / designated marksman rifle. The 18” match grade 1-7 twist barrel offers exceptional accuracy with heavier bullets making it a more effective long range rifle. The rifle length T.R.I.M. rail offers extreme versatility for mounting mission essential equipment such as night vision, bipod, tactical light, secondary optics, etc... The SPR is equally at home as a sniper / designated marksman rifle, on the range or as a long range small game hunting rifle. This SPR comes with a Billet Upper and lower receiver, threaded muzzle with Q-Comp break, Bravo Company Pistol Grip, Tactical Trigger Unit Single Stage 4#, Armor-Tuff Finish and a Stainless Match Grade Barrel.

Ship with one 30 round magazine.

SPR-15AQ8-BLK

Out of stock

Out of stock

Wilson Combat Parts

If you are building a customized 1911 for competition or carry, Wilson Combat Parts should be your custom feature provider. Or if you are simply repairing a broken part on your pistol, you will probably find the professional quality part on our site. When you look at our extensive list of Wilson Combat parts, you’re going to think “Wow!” Order a high ride beavertail grip safety on a Colt pistol. With this part, you gain control of your pistol while ending any discomfort from a stock grip safety. When 1911 owners think Wilson Combat, they think match grade parts, such as fully machined mainspring housing, barrel bushings produced from select steel for ongoing reliability, or an ultra-light trigger to supply a crisp trigger pull. Many competition shooters view this supplier as a success supporter. Items such as the wide-buttoned, extended gun magazine release help competitors in completing faster magazine changes. Build a race-ready 1911 with sizzling style and plenty of features by shopping our site.

When Wilson Combat makes a part, the company has the goal of producing a product that will surpass a factory part’s life span. Items like extractors are designed to hold tension longer and serve the owner beyond the traditional factory service. Wilson Combat is recognized as a leader in match-grade, drop-in gun barrels, but the company also supplies our store with too many parts to mention, including: firing pins, grip screws, guide rods, hammers, pin sets, plunger tubes, slide stops and springs. You don’t have to be a competitor to order long-lasting parts or professional features. Go ahead – get enthused over all that Wilson Combat and Top Gun Supply have to offer your 1911.