CZ
Shop by:
Products
CZ P-10 Sub Compact, 9mm
|
CZ's P-10 pistol features a grip angle which avoids that "brick-in-the-hand" feeling that has plagued many in the striker-fired genre, allowing it to point naturally. Its trigger is designed to minimize creep and stacking, and rebounds with a short, positive reset, meaning single shots can be meticulously placed while follow-ups are effortless. The fiber-reinforced polymer frame and hardy nitride finish are made for the daily grind. A generous trigger guard allows use with gloved hands while being undercut to allow as high a grip as possible. It features an ambidextrous slide release and swappable mag release. Polymer fiber reinforced frame, 12rnd magazines, 3.5" barrel and an overall weight of 24.4 oz. Ships with 2 magazines, case and manual.
|
91560
In stock
$559.00
CZ P-10 Sub Compact, 9mm - FDE
|
The sub-compact variant in the P-10 line, the S is small and light for comfortable everyday carry. With a bevy of stand-out features that have made the P-10 line a success, the P-10 S has a crisp trigger, superior ergonomics and rugged reliability that set it apart from many in the striker-fired crowd. A reversible magazine release takes just a few minutes work to swap so that lefties can manipulate it with their thumb from the right side of the pistol. Two 10RD Magazines.
|
01561
In stock
$629.95
CZ P-10 Sub Compact, 9mm - ODG
|
The sub-compact variant in the P-10 line, the S is small and light for comfortable everyday carry. With a bevy of stand-out features that have made the P-10 line a success, the P-10 S has a crisp trigger, superior ergonomics and rugged reliability that set it apart from many in the striker-fired crowd. A reversible magazine release takes just a few minutes work to swap so that lefties can manipulate it with their thumb from the right side of the pistol. Two 10RD Magazines.
|
01565
In stock
$629.95
CZ P-10F Threaded Barrel, Night Sights, 9mm
|
P-10 F is unsurpassed in the striker-fired world when it comes to flush-fitting mags. The longer slide and barrel bring a better sight radius, meaning it’s even easier to be accurate with. The added weight means it shoots flatter and reduced felt recoil. One change that happens on both the US-made and Czech-made P-10s is the switch to a swappable magazine release. With a change in geometry, the goal was to eliminate the stiffness some customers experienced as the magazine release broke in, even though it became smooth after some use. This new reversible release just requires a few minutes to swap, allowing the P-10 to remain lefty-friendly. The P-10’s trigger is designed to minimize creep and stacking, and after initial break-in averages a clean 4.5-5 lb pull and rebounds with a short, positive reset — meaning single shots can be meticulously placed while follow-ups are effortless. Built to withstand the rigors of military use, its fiber-reinforced polymer frame and hardy nitride finish are made for the daily grind. A generous trigger guard allows use with gloved hands while being undercut to allow as high a grip as possible, and a set of metal tactical 3-dot sights allow for one-handed manipulation of the slide on a belt. Take-down of the P-10 will be familiar to most fans of striker-fired guns, and even more pleasing will be holster compatibility with some of the most common guns on the market. This model has a 10RD capacity. Must ship to a U.S. FFL dealer |
01544
In stock
$599.95
CZ 2075 RAMI BD, Night Sights, 9mm
|
The CZ 2075 RAMI BD is a decocking version of the classic RAMI design available only in 9mm Luger. The BD RAMI gives the user a decocking lever to lower the hammer for a double action first shot and single action thereafter. The BD RAMI also includes a set of tritium 3-dot combat night sights. The RAMI BD 9mm is shipped with two low-capacity compliant version 10 round magazines. |
01754
Out of stock
CZ 2075 RAMI BD, Night Sights, 9mm
|
The CZ 2075 RAMI BD is a decocking version of the classic RAMI design available only in 9mm Luger. The BD RAMI gives the user a decocking lever to lower the hammer for a double action first shot and single action thereafter. The BD RAMI also includes a set of tritium 3-dot combat night sights. The RAMI BD 9mm is shipped with one 10 round flush-fitting magazine and one 14 round extended magazine or a low-capacity compliant version with two 10 round magazines. |
91754
Out of stock
CZ 2075 RAMI, Fixed Sights, 9mm
|
The CZ 2075 RAMI model features an alloy frame, adjustable luminescent sights and two magazines. Comes with a hard carry case and manual. |
91750
Out of stock
CZ 457 American Combo, 22LR & 17HMR
|
The American Combo ships with both 22 LR and 17 HMR barrel sets and like all 457s it can be easily swapped between those in minutes. The classic American-style rimfire rifle, this gorgeous 457 has a 24.8” barrel with no sights and is meant to be topped with a scope. Its Turkish walnut stock has a high, flat comb and a classic checkering pattern. Like all of our 457s, it has an 11mm dovetail milled into the top of its receiver for attaching scope ringmounts. If we were to pick one thing that our previous rimfire platforms were lacking, it was an American-style push-to-fire safety — something Hunter’s Education instructors and 4-H shooting coaches have begged us to incorporate for years. Though that was the most obvious change, we also took the opportunity to tweak a load of small things at the same time. In addition to the receiver-mounted, push-to-fire safety, we chopped almost an inch of length from the action and slab-sided it to reduce its footprint and weight. The stamped bottom metal of the 455 is gone, swapped for a classy two-piece interlocking system. To make scope fitment easier, we ditched the 90° bolt rotation in favor of 60°, allowing for larger ocular bell diameters with lower ring heights. To top it all off, the 457 now features a trigger adjustable for weight, creep and over-travel. With the exact same swappable barrel system as the 455 and the same reliable polymer magazine system, the 457 is without a doubt the best rimfire platform we’ve ever fielded. |
02320
Out of stock
CZ 457 American Synthetic SR, 22LR
|
This variant of our 457 American sports a newly-designed synthetic stock that borrows ergonomics and styling cues from our 557 American Synthetic. That synthetic stock, paired with the 457’s nitride finish, makes the rifle near impervious to the elements. 1/2×28 threads and our especially tight chamber tolerances make this rifle an ideal suppressor host. Not equipped with sights, this rifle has 11mm dovetails milled directly into the CNCed billet action for the solid mounting of rails or rings. The cold hammer forged barrel, fully adjustable trigger, push-to-fire safety and interchangeable barrel system all add up to equal a rifle that will last generations. |
02313
Out of stock
CZ 457 American, 22LR
|
The classic American-style rimfire rifle, this gorgeous 457 has a 24.8” barrel with no sights and is meant to be topped with a scope. Its Turkish walnut stock has a high, flat comb and a classic checkering pattern. Like all of our 457s, it has an 11mm dovetail milled into the top of its receiver for attaching scope ringmounts. If we were to pick one thing that our previous rimfire platforms were lacking, it was an American-style push-to-fire safety — something Hunter’s Education instructors and 4-H shooting coaches have begged us to incorporate for years. Though that was the most obvious change, we also took the opportunity to tweak a load of small things at the same time. In addition to the receiver-mounted, push-to-fire safety, we chopped almost an inch of length from the action and slab-sided it to reduce its footprint and weight. The stamped bottom metal of the 455 is gone, swapped for a classy two-piece interlocking system. To make scope fitment easier, we ditched the 90° bolt rotation in favor of 60°, allowing for larger ocular bell diameters with lower ring heights. To top it all off, the 457 now features a trigger adjustable for weight, creep and over-travel. With the exact same swappable barrel system as the 455 and the same reliable polymer magazine system, the 457 is without a doubt the best rimfire platform we’ve ever fielded. |
02310
Out of stock
CZ 75 SP-01 Tactical, Night Sights, 9mm
|
The full size version of the P-01 Compact, the SP-01 Tactical features matte black polycoat finish, extended beavertail, ambidextrous decocking levers, full length dust cover with rail, rubber grips, night sights and two 18 round magazines. Comes with a hard carry case and manual. |
91153
Out of stock
CZ 75 SP-01 Tactical, Urban Grey, Suppressor Ready, Night Sights, 9mm
|
The full size version of the P-01 Compact, the SP-01 Tactical features a matte urban grey polycoat finish, threaded barrel with thread protector, extended beavertail, ambidextrous decocking levers, DA/SA action, full length dust cover with rail, rubber grips, tall suppressor night sights and two 18 round magazines. Comes with a hard carry case and manual. |
91253
Out of stock
CZ 75 SP-01, Night Sights, 9mm
|
The full size version of the P-01 Compact, the CZ-75 SP-01 features matte black polycoat finish, extended beavertail, ambidextrous safety levers, full length dust cover with rail, rubber grips, night sights and two 18 round magazines. DA/SA with manual safety only. Comes with a hard carry case and manual. |
91152
Out of stock
CZ 75 TS Czechmate, Fixed Sights, 9mm, SAO
|
The Czechmate is based on a modified version of the CZ 75 TS frame. It comes with all parts necessary to run in IPSC Open or Limited division (both in 9mm). The Czechmate comes configured for Open division competition with a compensator and C-More red dot sight. The included front sight adapter replaces the compensator, and the included rear sight replaces the slide racker handle when switching from Open to Limited configuration. Kit Includes:
|
91174
Out of stock
CZ Bren 2 MS Pistol 11", 5.56
|
The next generation of the Bren, the Bren 2 Ms makes first landfall in the US in pistol form with multiple barrel lengths and two chamberings. Whereas the 805 Bren was designed to a specific set of requirements set out by the Czech military, the Bren 2 is a clean-sheet design. With a bevy of changes, the most noticeable is sure to be the strict weight-loss regimen that the Bren 2 has undergone. With a trimmed-down aluminum receiver and a lower made from carbon fiber-reinforced polymer, the result is a robust but substantially lighter gun. Gone is the reciprocating charging handle, replaced with one that stays stowed in the forward position until it is needed. Swappable from side to side, it does double duty as a forward assist. Also added is an AR-style bolt catch/release system that is mirrored on both sides of the firearm, as well as a catch/release nestled into the front of the trigger guard. The magazine release and safety are also ambidextrous and located in very familiar locations for anyone versed in the AR platform. In pistol form, the Bren 2 Ms comes with a flush rear plate that has the provision for attaching a AR-style buffer tube for the installation of an arm brace, cheek rest or similar pistol stabilizing device. For those who wish to SBR, a Carbine buffer tube and stock can be installed or the entire rear plate can be removed and replaced with a factory folding/adjustable stock. |
91451
Out of stock
CZ Bren 2 MS Pistol 8", 5.56
|
The next generation of the Bren, the Bren 2 Ms makes first landfall in the US in pistol form with multiple barrel lengths and two chamberings. Whereas the 805 Bren was designed to a specific set of requirements set out by the Czech military, the Bren 2 is a clean-sheet design. With a bevy of changes, the most noticeable is sure to be the strict weight-loss regimen that the Bren 2 has undergone. With a trimmed-down aluminum receiver and a lower made from carbon fiber-reinforced polymer, the result is a robust but substantially lighter gun. Gone is the reciprocating charging handle, replaced with one that stays stowed in the forward position until it is needed. Swappable from side to side, it does double duty as a forward assist. Also added is an AR-style bolt catch/release system that is mirrored on both sides of the firearm, as well as a catch/release nestled into the front of the trigger guard. The magazine release and safety are also ambidextrous and located in very familiar locations for anyone versed in the AR platform. Chambered in 223 and 7.62×39, each is available in several barrel lengths. AR-15 style magazines are used for 223 variants, whereas in 7.62 the factory’s magazines are used to ensure last round hold-open and consistent feeding. All variants are swappable to different barrel lengths and chamberings and also feature a modular forend that can be swapped to different lengths. In pistol form, the Bren 2 Ms comes with a flush rear plate that has the provision for attaching a AR-style buffer tube for the installation of an arm brace, cheek rest or similar pistol stabilizing device. For those who wish to SBR, a Carbine buffer tube and stock can be installed or the entire rear plate can be removed and replaced with a factory folding/adjustable stock.
|
91450
Out of stock
CZ Bren 2 MS Pistol 9", 7.62x39
|
The next generation of the Bren, the Bren 2 Ms makes first landfall in the US in pistol form with multiple barrel lengths and two chamberings. Whereas the 805 Bren was designed to a specific set of requirements set out by the Czech military, the Bren 2 is a clean-sheet design. With a bevy of changes, the most noticeable is sure to be the strict weight-loss regimen that the Bren 2 has undergone. With a trimmed-down aluminum receiver and a lower made from carbon fiber-reinforced polymer, the result is a robust but substantially lighter gun. Gone is the reciprocating charging handle, replaced with one that stays stowed in the forward position until it is needed. Swappable from side to side, it does double duty as a forward assist. Also added is an AR-style bolt catch/release system that is mirrored on both sides of the firearm, as well as a catch/release nestled into the front of the trigger guard. The magazine release and safety are also ambidextrous and located in very familiar locations for anyone versed in the AR platform. In pistol form, the Bren 2 Ms comes with a flush rear plate that has the provision for attaching a AR-style buffer tube for the installation of an arm brace, cheek rest or similar pistol stabilizing device. For those who wish to SBR, a Carbine buffer tube and stock can be installed or the entire rear plate can be removed and replaced with a factory folding/adjustable stock. |
91460
Out of stock
CZ P-09, Fixed Sights, 9mm
|
The CZ P09 is a full size polymer framed duty 9mm with unsurpassed 19+1 capacity. These brand new DA/SA P09 models feature an ambidextrous decocker, 4.53" barrel, 1913 Picatinny rail, lanyard loop, fixed 3 dot sights, omega trigger system that allows easy conversion from a handgun with decocker or a manual safety with a quick parts change. Comes with a hard carry case, two 19RD magazines, interchangeable backstraps, and manual. |
91620
Out of stock
CZ Guns
Two letters can stand for a stronger defense. CZ guns have been manufactured to discriminating standards for decades. The guns include desirable features such as hammer forged barrels, tight tolerances and ergonomic grips and controls. The CZ goal is to be a global leader in the manufacture of small arms. Advanced technology, intensive testing, and expert machining contribute to the great reputation behind a CZ gun. The famous CZ 75B pistol is a fixture in government, military, and police forces. It has a trademark all-steel construction in its full pistol size. Unique characteristics are incorporated into the CZ lines, offering owners compacts, safety features, and sight options. The compacts are similar to the full size CZ 75 while delivering a weight and bulk that’s more comfortable to carry. Cases and manuals accompany all CZ orders. Additional options for protective gun storage are also on our site at a savings.
CZ Pistols Feature Advanced Materials for Endurance
When you purchase one of our CZ pistols, you receive a 9mm gun built with advanced materials. With every member of the CZ pistol family, you’ll gain improved recoil control, smoother action and definitive accuracy. Need a competition pistol? A CZ could be your performer of choice. For safety’s sake, a CZ 9mm compact features a decocker for less discharge risk. It also comes with fixed luminescent sights, two 14-round gun magazines, and more. The Omega version of a CZ 75B operates beyond expectations with a thumb safety, two 16-round mags and an enhanced trigger design. The police model of these popular pistols adds extra safety with a loaded chamber indicator. The CZ Dan Wesson 1911 pistols are excellent options with 10mm or .45acp caliber, forged, match grade barrel and bushing and Ed Brown Bullet-Proof parts.