CZ

CZ

Shop by:

Caliber
+ More
Color
Category

Products

CZ P-10 Sub Compact OR, 9mm - 10RND

CZ P-10 Sub Compact OR, 9mm - 10RND

CZ's P-10 Optics Ready pistol features a grip angle which avoids that "brick-in-the-hand" feeling that has plagued many in the striker-fired genre, allowing it to point naturally. A mild palm swell, deep beavertail and three interchangeable backstraps make the P-10 fit a wide variety of hands as if it were built for them. Its trigger is designed to minimize creep, stacking, and rebounds with a short, positive reset, meaning single shots can be meticulously placed while follow-ups are effortless. The fiber-reinforced polymer frame and hardy nitride finish are made for the daily grind. A generous trigger guard allows use with gloved hands while being undercut to allow as high a grip as possible. It features an ambidextrous slide release and swappable mag release. This new reversible release just requires a few minutes to swap, allowing the pistol to remain lefty-friendly. Optics Ready version (optic plates for Trijicon RMR and Leupold DeltaPoint Pro available).

Ships with 10RND magazines.



05170

Out of stock

Out of stock
CZ P-10 Sub Compact, 9mm - ODG

CZ P-10 Sub Compact, 9mm - ODG

The sub-compact variant in the P-10 line, the S is small and light for comfortable everyday carry. With a bevy of stand-out features that have made the P-10 line a success, the P-10 S has a crisp trigger, superior ergonomics and rugged reliability that set it apart from many in the striker-fired crowd. A reversible magazine release takes just a few minutes work to swap so that lefties can manipulate it with their thumb from the right side of the pistol. Two 10RD Magazines.

01565

Out of stock

Out of stock
CZ P-10 Sub Compact, Night Sights, 9mm

CZ P-10 Sub Compact, Night Sights, 9mm

CZ P10 Subcompact chambered in 9mm with a single tritium lamp in the front with a large orange surround and a serrated black rear. Polymer fiber reinforced frame, 12rnd magazines, 3.5" barrel and an overall weight of 24.4 oz. Ships with 2 magazines, case and manual.


95160

Out of stock

Out of stock
CZ P-10F Threaded Barrel, Night Sights, 9mm

CZ P-10F Threaded Barrel, Night Sights, 9mm

P-10 F is unsurpassed in the striker-fired world when it comes to flush-fitting mags. The longer slide and barrel bring a better sight radius, meaning it’s even easier to be accurate with. The added weight means it shoots flatter and reduced felt recoil.

One change that happens on both the US-made and Czech-made P-10s is the switch to a swappable magazine release. With a change in geometry, the goal was to eliminate the stiffness some customers experienced as the magazine release broke in, even though it became smooth after some use. This new reversible release just requires a few minutes to swap, allowing the P-10 to remain lefty-friendly.

The P-10’s trigger is designed to minimize creep and stacking, and after initial break-in averages a clean 4.5-5 lb pull and rebounds with a short, positive reset — meaning single shots can be meticulously placed while follow-ups are effortless. Built to withstand the rigors of military use, its fiber-reinforced polymer frame and hardy nitride finish are made for the daily grind. A generous trigger guard allows use with gloved hands while being undercut to allow as high a grip as possible, and a set of metal tactical 3-dot sights allow for one-handed manipulation of the slide on a belt.

Take-down of the P-10 will be familiar to most fans of striker-fired guns, and even more pleasing will be holster compatibility with some of the most common guns on the market. This model has a 10RD capacity.

Must ship to a U.S. FFL dealer

01544

Out of stock

Out of stock
CZ P-10F Threaded Barrel, Night Sights, 9mm - Gray

CZ P-10F Threaded Barrel, Night Sights, 9mm - Gray

P-10 F is unsurpassed in the striker-fired world when it comes to flush-fitting mags. The longer slide and barrel bring a better sight radius, meaning it’s even easier to be accurate with. The added weight means it shoots flatter and reduced felt recoil.

One change that happens on both the US-made and Czech-made P-10s is the switch to a swappable magazine release. With a change in geometry, the goal was to eliminate the stiffness some customers experienced as the magazine release broke in, even though it became smooth after some use. This new reversible release just requires a few minutes to swap, allowing the P-10 to remain lefty-friendly.

The P-10’s trigger is designed to minimize creep and stacking, and after initial break-in averages a clean 4.5-5 lb pull and rebounds with a short, positive reset — meaning single shots can be meticulously placed while follow-ups are effortless. Built to withstand the rigors of military use, its fiber-reinforced polymer frame and hardy nitride finish are made for the daily grind. A generous trigger guard allows use with gloved hands while being undercut to allow as high a grip as possible, and a set of metal tactical 3-dot sights allow for one-handed manipulation of the slide on a belt.

Take-down of the P-10 will be familiar to most fans of striker-fired guns, and even more pleasing will be holster compatibility with some of the most common guns on the market.

Must ship to a U.S. FFL dealer

91544

Out of stock

Out of stock
CZ P-10F, .45ACP - BLK

CZ P-10F, .45ACP - BLK

CZ's P-10 pistol features a grip angle which avoids that "brick-in-the-hand" feeling that has plagued many in the striker-fired genre, allowing it to point naturally. A mild palm swell, deep beavertail, and three interchangeable backstraps make the P-10 fit a wide variety of hands as if it were built for them. Its trigger is designed to minimize creep and stacking, and rebounds with a short, positive reset, meaning single shots can be meticulously placed while follow-ups are effortless. The fiber-reinforced polymer frame and hardy nitride finish are made for the daily grind. A generous trigger guard allows use with gloved hands while being undercut to allow as high a grip as possible. It features an ambidextrous slide release and swappable mag release. Ships with two 13RD magazines and hard case. Must ship to a U.S. FFL dealer

91590

Out of stock

Out of stock
CZ P-10F, 9mm - 10RD

CZ P-10F, 9mm - 10RD

CZ's P-10 pistol features a grip angle which avoids that "brick-in-the-hand" feeling that has plagued many in the striker-fired genre, allowing it to point naturally. A mild palm swell, deep beavertail and three interchangeable backstraps make the P-10 fit a wide variety of hands as if it were built for them. Its trigger is designed to minimize creep and stacking, and rebounds with a short, positive reset, meaning single shots can be meticulously placed while follow-ups are effortless. The fiber-reinforced polymer frame and hardy nitride finish are made for the daily grind. A generous trigger guard allows use with gloved hands while being undercut to allow as high a grip as possible. Features an ambidextrous slide release and swappable mag release. Ships with two 10RND magazines.Must ship to a U.S. FFL dealer

01540

Out of stock

Out of stock
CZ P-10F, 9mm - BLK

CZ P-10F, 9mm - BLK

CZ's P-10 pistol features a grip angle which avoids that "brick-in-the-hand" feeling that has plagued many in the striker-fired genre, allowing it to point naturally. A mild palm swell, deep beavertail, and three interchangeable backstraps make the P-10 fit a wide variety of hands as if it were built for them. Its trigger is designed to minimize creep and stacking, and rebounds with a short, positive reset, meaning single shots can be meticulously placed while follow-ups are effortless. The fiber-reinforced polymer frame and hardy nitride finish are made for the daily grind. A generous trigger guard allows use with gloved hands while being undercut to allow as high a grip as possible. It features an ambidextrous slide release and swappable mag release. Ships with two 19RD magazines and hard case. Must ship to a U.S. FFL dealer

91540

Out of stock

Out of stock
CZ P01, Fixed Sights, 9mm - ODG

CZ P01, Fixed Sights, 9mm - ODG

These brand new P01 CZ 75D Compact models feature a decocker, M3 rail, lanyard loop, fixed sights, OD Green frame & slide and two 14 round magazines. Comes with a hard carry case and manual.

91198

Out of stock

Out of stock
CZ P07 Suppressor Ready, Night Sights, 9mm - BLK

CZ P07 Suppressor Ready, Night Sights, 9mm - BLK

The CZ P-07 is the updated version of the CZ 75 P-07 Duty. It features a nitrated slide finish that wears longer and has increased corrosion resistance. The pistol as a whole has been dehorned, removing any sharp edges to make it more comfortable for all-day carry. This model also features small, medium, and large backstraps and an integrated 1913 Picatinny rail on the dust cover. The P-07 is adaptable to the shooter and their needs, from service pistol to bedside protector to the envy of the shooting range. The updated trigger shape is more comfortable for long days at the range, as well as its snag-free hammer and forward cocking serrations. Metal 3-dot sights and a beefed up magazine spring round out the bevy of updates, resulting in the ideal P-07.

91289

Out of stock

Out of stock
CZ P07, Night Sights, 9mm - ODG/BLK

CZ P07, Night Sights, 9mm - ODG/BLK

The CZ P-07 was the first handgun to feature the convertible Omega trigger system. A simplification of the CZ 75's hammer ignition method, the Omega's trigger parts are interlocking in nature, allowing full disassembly and reassembly without the need for gunsmithing experience or tools. The best part of this system is its convertible decocker/safety system. The pistol can be carried cocked and locked or decocked for a double-action first pull of the trigger. It also has forward cocking serrations. This model has an OD Green polymer frame and tritium night sights.

91077

Out of stock

Out of stock
CZ P07, Night Sights, 9mm - ODG/BLK - 10RND

CZ P07, Night Sights, 9mm - ODG/BLK - 10RND

The CZ P-07 was the first handgun to feature the convertible Omega trigger system. A simplification of the CZ 75's hammer ignition method, the Omega's trigger parts are interlocking in nature, allowing full disassembly and reassembly without the need for gunsmithing experience or tools. The best part of this system is its convertible decocker/safety system. The pistol can be carried cocked and locked or decocked for a double-action first pull of the trigger. It also has forward cocking serrations. This model has an OD Green polymer frame and tritium night sights and ships with 2 10RND magazines.

01077

Out of stock

Out of stock
CZ Scorpion EVO 3 9mm Pistol, 7.72" – BLK

CZ Scorpion EVO 3 9mm Pistol, 7.72" – BLK

CZ's Scorpion EVO 3 S1 pistol utilizes the carbine-model's extended, slim profile forend that will hide most 9mm and hybrid cans, while offering M-LOK attachment points and boosting the sight radius a good deal. Low-profile aluminum adjustable sights round out the platform, with a rear sight featuring four different aperture sizes, and a top Picatinny rail for mounting optics. The Scorpion line has a fiber-reinforced polymer frame with an ambidextrous safety. The black polymer pistol grip is adjustable for trigger reach. It still uses the 7.72" cold hammer-forged barrel of the standard Scorpion pistol with a muzzle featuring dual threads of 18x1 and 1/2x28 to make fitting a suppressor simple. Note: Current production Scorpion pistols lack the .75" sling slot on the left side of the action that is present on earlier variants. This model features a 5" KAK Flash Can which extends the barrel to just a hair past the forend. It includes a 20-round magazine.

91353

Out of stock

Out of stock
CZ Scorpion EVO 3 S1 9mm Pistol – Gray

CZ Scorpion EVO 3 S1 9mm Pistol – Gray

This CZ Scorpion sub-gun is a blowback-operated semi-auto in 9mm with a 7.75" cold hammer-forged barrel. Its muzzle features 1/2x28 threads hidden underneath the factory flash hider, meaning users can fit either 1/2x28 or 18x1 accessories to the muzzle. Equipped with low-profile sights, its rear sight has four different aperture sizes for everything from close quarters to way out there. The sights ride on an 11" Picatinny rail perfect for mounting optics. It has a polymer frame with a QD sling swivel pocket integrated into the rear sling attachment point. Simple and reliable, the Scorpion not only has ambidextrous controls, its non-reciprocating charging handle is swappable and trigger reach is adjustable. This model has an Battleship gray metal finish.

91356

Out of stock

Out of stock
CZ Scorpion EVO 3 S1 9mm Pistol – ODG

CZ Scorpion EVO 3 S1 9mm Pistol – ODG

This CZ Scorpion sub-gun is a blowback-operated semi-auto in 9mm with a 7.75" cold hammer-forged barrel. Its muzzle features 1/2x28 threads hidden underneath the factory flash hider, meaning users can fit either 1/2x28 or 18x1 accessories to the muzzle. Equipped with low-profile sights, its rear sight has four different aperture sizes for everything from close quarters to way out there. The sights ride on an 11" Picatinny rail perfect for mounting optics. It has a polymer frame with a QD sling swivel pocket integrated into the rear sling attachment point. Simple and reliable, the Scorpion not only has ambidextrous controls, its non-reciprocating charging handle is swappable and trigger reach is adjustable. This model has an OD green metal finish.

91355

Out of stock

Out of stock
CZ Scorpion EVO 3 S2 Pistol Micro w/ Brace, 9mm

CZ Scorpion EVO 3 S2 Pistol Micro w/ Brace, 9mm

With a 4" barrel, HB Industries short handguard and a folding SB Tactical brace, this new variant of the diminutive Scorpion Micro takes into account input from the CZ fan base. Replacing the previous Micro that was equipped with a collapsible brace, this version also gets a more minimal flash can muzzle device and Magpul MBUS back-up iron sights. The Scorpion not only has ambidextrous controls, its non-reciprocating charging handle is swappable and reach to the trigger is adjustable. A Picatinny rail makes mounting optics easy, while M-LOK attachment points on the forend allow for easy mounting of accessories.

Must ship to a U.S. FFL dealer

91345

Out of stock

Out of stock
CZ Scorpion EVO 3 S2 Pistol Micro w/ Brace, 9mm - 10RD

CZ Scorpion EVO 3 S2 Pistol Micro w/ Brace, 9mm - 10RD

The CZ Scorpion sub-gun is a blowback-operated semi-auto with cold hammer-forged barrel. Its muzzle features 1/2x28 threads hidden underneath the factory flash hider, meaning users can fit either 1/2x28 or 18x1 accessories to the muzzle. Equipped with low-profile sights, its rear sight has four different aperture sizes for everything from close quarters to way out there. The sights ride on an 11" Picatinny rail perfect for mounting optics. It has a polymer frame with a QD sling swivel pocket integrated into the rear sling attachment point. Simple and reliable, the Scorpion not only has ambidextrous controls, its non-reciprocating charging handle is swappable and trigger reach is adjustable. This S2 Micro model has a 4.5" barrel, flash can muzzle device, Magpul MBUS back-up iron sights and SB Tactical folding brace. Two 10RND magazines shipped with pistol.

Must ship to a U.S. FFL dealer

01345

Out of stock

Out of stock
CZ Scorpion EVO 3+ Micro 9mm Pistol – Black

CZ Scorpion EVO 3+ Micro 9mm Pistol – Black

Building on our most popular firearm, the CZ Scorpion 3+ is an enhanced Scorpion model featuring upgrades most requested by our customers.

With backwards compatible magazines, an ambidextrous mag release and bolt catch, improved sights and upgraded grip ergonomics the Scorpion 3 + offers the operator an exceptional shooting experience on the range, as well as confidence and security at home. 4.2" threaded barrel (1/2x28), 4.7LBS and ships with 20RD magazines.

91420

Out of stock

Out of stock

CZ Guns

Two letters can stand for a stronger defense. CZ guns have been manufactured to discriminating standards for decades. The guns include desirable features such as hammer forged barrels, tight tolerances and ergonomic grips and controls. The CZ goal is to be a global leader in the manufacture of small arms. Advanced technology, intensive testing, and expert machining contribute to the great reputation behind a CZ gun. The famous CZ 75B pistol is a fixture in government, military, and police forces. It has a trademark all-steel construction in its full pistol size. Unique characteristics are incorporated into the CZ lines, offering owners compacts, safety features, and sight options. The compacts are similar to the full size CZ 75 while delivering a weight and bulk that’s more comfortable to carry. Cases and manuals accompany all CZ orders. Additional options for protective gun storage are also on our site at a savings.

CZ Pistols Feature Advanced Materials for Endurance

When you purchase one of our CZ pistols, you receive a 9mm gun built with advanced materials. With every member of the CZ pistol family, you’ll gain improved recoil control, smoother action and definitive accuracy. Need a competition pistol? A CZ could be your performer of choice. For safety’s sake, a CZ 9mm compact features a decocker for less discharge risk. It also comes with fixed luminescent sights, two 14-round gun magazines, and more. The Omega version of a CZ 75B operates beyond expectations with a thumb safety, two 16-round mags and an enhanced trigger design. The police model of these popular pistols adds extra safety with a loaded chamber indicator. The CZ Dan Wesson 1911 pistols are excellent options with 10mm or .45acp caliber, forged, match grade barrel and bushing and Ed Brown Bullet-Proof parts.


The CZ brand is a prolific manufacture of firearms. With high production numbers that are only matched by their quality. Top Gun Supply keeps many of their models in stock. CZ offers many models that vary in design and caliber.

CZ or ‘Česká zbrojovka’ translates to ‘Czech armory’ founded in 1937 this manufacturer has a rich history of producing quality firearms at affordable prices due to their manufacturing methods and resources.

As found on their website about the USA representation.

Headquartered in Kansas City, KS since 1998, CZ-USA is an importer, manufacturer and distributor of pistols, rifles, shotguns and suppressors. The exclusive US importer of rifles and pistols from Česká zbrojovka a.s. Uherský Brod, (CZUB) of the Czech Republic, CZ-USA also designs and imports the CZ-USA Field Sports line of shotguns from Turkey. Fine 1911s and revolvers are made by subsidiary Dan Wesson and a growing line of CZ-USA suppressors is available for rimfire and centerfire firearms.

CZ does not sell direct to consumers but instead uses fully authorized dealers like Top Gun Supply to offer their fine guns to the United States marketplace.

CZ makes the popular Bren and Scorpion models that have the look at feel many appreciate for both sport and self defense use.

Top Gun also carries many of their 9MM and 45ACP models that are popular for their value, and dependability.