CZ

CZ

Shop by:

Caliber
+ More
Color
Category

Products

CZ 75 SP-01 Tactical, Urban Grey, Suppressor Ready, Night Sights, 9mm

CZ 75 SP-01 Tactical, Urban Grey, Suppressor Ready, Night Sights, 9mm

The full size version of the P-01 Compact, the SP-01 Tactical features a matte urban grey polycoat finish, threaded barrel with thread protector, extended beavertail, ambidextrous decocking levers, DA/SA action, full length dust cover with rail, rubber grips, tall suppressor night sights and two 18 round magazines. Comes with a hard carry case and manual.

91253

Out of stock

Out of stock
CZ 75 SP-01, Night Sights, 9mm

CZ 75 SP-01, Night Sights, 9mm

The full size version of the P-01 Compact, the CZ-75 SP-01 features matte black polycoat finish, extended beavertail, ambidextrous safety levers, full length dust cover with rail, rubber grips, night sights and two 18 round magazines. DA/SA with manual safety only. Comes with a hard carry case and manual.

91152

Out of stock

Out of stock
CZ 75 TS Czechmate, Fixed Sights, 9mm, SAO

CZ 75 TS Czechmate, Fixed Sights, 9mm, SAO

The Czechmate is based on a modified version of the CZ 75 TS frame. It comes with all parts necessary to run in IPSC Open or Limited division (both in 9mm). The Czechmate comes configured for Open division competition with a compensator and C-More red dot sight. The included front sight adapter replaces the compensator, and the included rear sight replaces the slide racker handle when switching from Open to Limited configuration.

Kit Includes:

  • C-more slide-ride non-click 6 moa dot
  • Ambidextrous slide racker
  • (3) 20-round magazines
  • (1) 26-round magazine
  • 4 port compensator
  • Spare 9mm barrel threaded for compensator
  • Aluminum grips
  • Aluminum magwell
  • Competition hammer
  • (2) slide stops with slide lock
  • (4) slide stop pins without slide lock
  • Undercut trigger guard and beavertail for high grip
  • Crisp SAO trigger
  • Ambidextrous Thumb Safety
  • Extended Magazine Release

Must ship to a U.S. FFL dealer

91174

Out of stock

Out of stock
CZ Bren 2 MS Pistol 11", 5.56

CZ Bren 2 MS Pistol 11", 5.56

The next generation of the Bren, the Bren 2 Ms makes first landfall in the US in pistol form with multiple barrel lengths and two chamberings. Whereas the 805 Bren was designed to a specific set of requirements set out by the Czech military, the Bren 2 is a clean-sheet design. With a bevy of changes, the most noticeable is sure to be the strict weight-loss regimen that the Bren 2 has undergone. With a trimmed-down aluminum receiver and a lower made from carbon fiber-reinforced polymer, the result is a robust but substantially lighter gun.

Gone is the reciprocating charging handle, replaced with one that stays stowed in the forward position until it is needed. Swappable from side to side, it does double duty as a forward assist. Also added is an AR-style bolt catch/release system that is mirrored on both sides of the firearm, as well as a catch/release nestled into the front of the trigger guard. The magazine release and safety are also ambidextrous and located in very familiar locations for anyone versed in the AR platform. In pistol form, the Bren 2 Ms comes with a flush rear plate that has the provision for attaching a AR-style buffer tube for the installation of an arm brace, cheek rest or similar pistol stabilizing device. For those who wish to SBR, a Carbine buffer tube and stock can be installed or the entire rear plate can be removed and replaced with a factory folding/adjustable stock.

Must ship to a U.S. FFL dealer

91451

Out of stock

Out of stock
CZ Bren 2 MS Pistol 8", 5.56

CZ Bren 2 MS Pistol 8", 5.56

The next generation of the Bren, the Bren 2 Ms makes first landfall in the US in pistol form with multiple barrel lengths and two chamberings. Whereas the 805 Bren was designed to a specific set of requirements set out by the Czech military, the Bren 2 is a clean-sheet design. With a bevy of changes, the most noticeable is sure to be the strict weight-loss regimen that the Bren 2 has undergone. With a trimmed-down aluminum receiver and a lower made from carbon fiber-reinforced polymer, the result is a robust but substantially lighter gun. Gone is the reciprocating charging handle, replaced with one that stays stowed in the forward position until it is needed. Swappable from side to side, it does double duty as a forward assist. Also added is an AR-style bolt catch/release system that is mirrored on both sides of the firearm, as well as a catch/release nestled into the front of the trigger guard. The magazine release and safety are also ambidextrous and located in very familiar locations for anyone versed in the AR platform. Chambered in 223 and 7.62×39, each is available in several barrel lengths. AR-15 style magazines are used for 223 variants, whereas in 7.62 the factory’s magazines are used to ensure last round hold-open and consistent feeding. All variants are swappable to different barrel lengths and chamberings and also feature a modular forend that can be swapped to different lengths. In pistol form, the Bren 2 Ms comes with a flush rear plate that has the provision for attaching a AR-style buffer tube for the installation of an arm brace, cheek rest or similar pistol stabilizing device. For those who wish to SBR, a Carbine buffer tube and stock can be installed or the entire rear plate can be removed and replaced with a factory folding/adjustable stock.

  • Product Name: CZ Bren 2 Ms Pistol 5.56x45, 8"
  • SKU: 91450
  • Firearm Type: Handgun
  • MSRP: $1,799.00
  • Chambering: .223/5.56x45Magazine
  • Capacity: 30
  • Magazine Type: AR-15/M16
  • Frame: Carbon Fiber-reinforced Polymer
  • Grips: Stippled
  • Sights: Folding adjustable
  • Barrel Length: 8.26 in
  • Barrel: Cold Hammer Forged
  • Weight: 5.4 lbs
  • Overall Length: 19.9 in
  • Safety: Ambidextrous Manual Safety

Must ship to a U.S. FFL dealer

91450

Out of stock

Out of stock
CZ Bren 2 MS Pistol 9", 7.62x39

CZ Bren 2 MS Pistol 9", 7.62x39

The next generation of the Bren, the Bren 2 Ms makes first landfall in the US in pistol form with multiple barrel lengths and two chamberings. Whereas the 805 Bren was designed to a specific set of requirements set out by the Czech military, the Bren 2 is a clean-sheet design. With a bevy of changes, the most noticeable is sure to be the strict weight-loss regimen that the Bren 2 has undergone. With a trimmed-down aluminum receiver and a lower made from carbon fiber-reinforced polymer, the result is a robust but substantially lighter gun.

Gone is the reciprocating charging handle, replaced with one that stays stowed in the forward position until it is needed. Swappable from side to side, it does double duty as a forward assist. Also added is an AR-style bolt catch/release system that is mirrored on both sides of the firearm, as well as a catch/release nestled into the front of the trigger guard. The magazine release and safety are also ambidextrous and located in very familiar locations for anyone versed in the AR platform.

In pistol form, the Bren 2 Ms comes with a flush rear plate that has the provision for attaching a AR-style buffer tube for the installation of an arm brace, cheek rest or similar pistol stabilizing device. For those who wish to SBR, a Carbine buffer tube and stock can be installed or the entire rear plate can be removed and replaced with a factory folding/adjustable stock.

Must ship to a U.S. FFL dealer

91460

Out of stock

Out of stock
CZ P-09, Fixed Sights, 9mm

CZ P-09, Fixed Sights, 9mm

The CZ P09 is a full size polymer framed duty 9mm with unsurpassed 19+1 capacity. These brand new DA/SA P09 models feature an ambidextrous decocker, 4.53" barrel, 1913 Picatinny rail, lanyard loop, fixed 3 dot sights, omega trigger system that allows easy conversion from a handgun with decocker or a manual safety with a quick parts change. Comes with a hard carry case, two 19RD magazines, interchangeable backstraps, and manual.

91620

Out of stock

Out of stock
CZ P-09, Night Sights, 9mm, OD Green - 10RND

CZ P-09, Night Sights, 9mm, OD Green - 10RND

The P-09 is CZ's full-size polymer frame, boasting an impressive capacity in its flush-fitting magazine. Featuring the versatile Omega trigger system, the P-09 is shipped with decockers installed, but can easily be converted to a manual safety with the supplied parts and instructions. Also included are small, medium, and large backstraps allowing the user to customize the pistol's grip while retaining the natural point of aim for which CZ handguns are known. With an integrated 1913 Picatinny rail, the P-09 is readily adaptable to low-light situations. The Omega DA/SA trigger provides crisp single action trigger break, while providing the safety of a DA first-pull option.

Ships with two 10rnd magazines.

01268

Out of stock

Out of stock
CZ P-10 Compact Threaded Barrel, Night Sights, 9mm

CZ P-10 Compact Threaded Barrel, Night Sights, 9mm

Built for use with suppressors, the P-10 C Urban Grey Suppressor-Ready has an extended/threaded barrel with 1/2x28 threads and is clad in a distinctive Urban Grey. High night sights and extended magazine capacity round out the package. Built to withstand the rigors of military use, its fiber-reinforced polymer frame and hardy nitride finish are made for the daily grind. A generous trigger guard allows use with gloved hands while being undercut to allow as high a grip as possible, and a set of metal tactical 3-dot sights allow for one-handed manipulation of the slide on a belt. It features a 4.61" barrel and weighs 26 oz. 10rd magazines.

01534

Out of stock

Out of stock
CZ P-10 Compact, Fixed Sights, 9mm

CZ P-10 Compact, Fixed Sights, 9mm

CZ's first entry into the striker market, the P-10 Compact checks all the boxes of a rugged, durable, ergonomic pistol, while still retaining the CZ quality and shootability that all CZ's are known for. Taking notes from various deficiencies and quirks of other striker pistols, CZ started with a natural grip angle, a deep cut beavertail, aggressive backstrap and frontstrap checkering, and three interchangeable backstraps to improve overall ergonomics as well as fit a wide variety of hand sizes. To address the trigger, CZ developed a crisp 4.5-5lb pull with minimal creep and stacking, with an ultra-crisp and short reset, ideal for a duty or carry pistol. Additional features include quick and easy takedown, metal three dot sights, durable Nitride finish, cold hammer forged barrel, and a compact 15+1 grip, the P-10C is the complete package. One change madeto the P-10s is the switch to a swappable magazine release. With a change in geometry, the goal was to eliminate the stiffness some customers experienced as the magazine release broke in, even though it became smooth after some use. This new reversible release just requires a few minutes to swap, allowing the P-10 to remain lefty-friendly (replaces SKU: 91520). Comes with two 15RD magazines, two spare backstraps, manual, lock and case.

91531

Out of stock

Out of stock
CZ P-10 Compact, Night Sights, 9mm - FDE

CZ P-10 Compact, Night Sights, 9mm - FDE

With CZ reliability, engineered ergonomics and a bevy of features both familiar and new, the P-10 is the complete package. The CZ grip angle, helps the P-10 avoids that 'brick-in-the-hand' feeling that has plagued many in the striker-fired genre, allowing it to point naturally. A mild palm swell, deep beavertail and three interchangeable backstraps make the P-10 fit a wide variety of hands. The P-10's trigger is designed to minimize creep and stacking, and after initial break-in averages a clean 4.5-5 lb. pull and rebounds with a short, positive reset - meaning single shots can be meticulously placed while follow-ups are effortless. Built to withstand the rigors of military use, its fiber-reinforced polymer frame and hardy nitride finish are made for the daily grind. A generous trigger guard allows use with gloved hands while being undercut to allow as high a grip as possible, and a set of metal tactical sights allow for one-handed manipulation of the slide on a belt. Like all CZ pistols, the P-10 is built with CZ's legendary cold hammer forged barrel. The 'C' in the name indicates that it is compact in both frame and slide size, and magazines are of the same family as the hammer-fired P-07, with this model having a 10RD capacity.

01532

Out of stock

Out of stock
CZ P-10 Sub Compact OR, 9mm - 10RND

CZ P-10 Sub Compact OR, 9mm - 10RND

CZ's P-10 Optics Ready pistol features a grip angle which avoids that "brick-in-the-hand" feeling that has plagued many in the striker-fired genre, allowing it to point naturally. A mild palm swell, deep beavertail and three interchangeable backstraps make the P-10 fit a wide variety of hands as if it were built for them. Its trigger is designed to minimize creep, stacking, and rebounds with a short, positive reset, meaning single shots can be meticulously placed while follow-ups are effortless. The fiber-reinforced polymer frame and hardy nitride finish are made for the daily grind. A generous trigger guard allows use with gloved hands while being undercut to allow as high a grip as possible. It features an ambidextrous slide release and swappable mag release. This new reversible release just requires a few minutes to swap, allowing the pistol to remain lefty-friendly. Optics Ready version (optic plates for Trijicon RMR and Leupold DeltaPoint Pro available).

Ships with 10RND magazines.



05170

Out of stock

Out of stock
CZ P-10 Sub Compact, 9mm - ODG

CZ P-10 Sub Compact, 9mm - ODG

The sub-compact variant in the P-10 line, the S is small and light for comfortable everyday carry. With a bevy of stand-out features that have made the P-10 line a success, the P-10 S has a crisp trigger, superior ergonomics and rugged reliability that set it apart from many in the striker-fired crowd. A reversible magazine release takes just a few minutes work to swap so that lefties can manipulate it with their thumb from the right side of the pistol. Two 10RD Magazines.

01565

Out of stock

Out of stock
CZ P-10 Sub Compact, Night Sights, 9mm

CZ P-10 Sub Compact, Night Sights, 9mm

CZ P10 Subcompact chambered in 9mm with a single tritium lamp in the front with a large orange surround and a serrated black rear. Polymer fiber reinforced frame, 12rnd magazines, 3.5" barrel and an overall weight of 24.4 oz. Ships with 2 magazines, case and manual.


95160

Out of stock

Out of stock
CZ P-10F Competition Ready 9mm

CZ P-10F Competition Ready 9mm

The new P-10 F Competition-Ready utilizes the full-size P-10 F frame and has a barrel and slide that are a half-inch longer, providing a longer sight radius for the included fiber optic front sight and fixed serrated rear sight. Additionally, like other P-10 models, the slide is milled to accept mounting plates for the most popular micro red-dot optics on the market. The pistol is outfitted with an Apex Tactical extended magazine catch, extended slide stop, back slide cover along with a HB Industries trigger for increased performance. Since every competition gun needs a little flash, gold accents on the barrel slide cover and on the trigger and three magazines equipped with aluminum Henning Group bases make this handgun stand out in the P-10 line and on the firing line. Ships with three 19RD magazines.Must ship to a U.S. FFL dealer

95180

Out of stock

Out of stock
CZ P-10F Threaded Barrel, Night Sights, 9mm

CZ P-10F Threaded Barrel, Night Sights, 9mm

P-10 F is unsurpassed in the striker-fired world when it comes to flush-fitting mags. The longer slide and barrel bring a better sight radius, meaning it’s even easier to be accurate with. The added weight means it shoots flatter and reduced felt recoil.

One change that happens on both the US-made and Czech-made P-10s is the switch to a swappable magazine release. With a change in geometry, the goal was to eliminate the stiffness some customers experienced as the magazine release broke in, even though it became smooth after some use. This new reversible release just requires a few minutes to swap, allowing the P-10 to remain lefty-friendly.

The P-10’s trigger is designed to minimize creep and stacking, and after initial break-in averages a clean 4.5-5 lb pull and rebounds with a short, positive reset — meaning single shots can be meticulously placed while follow-ups are effortless. Built to withstand the rigors of military use, its fiber-reinforced polymer frame and hardy nitride finish are made for the daily grind. A generous trigger guard allows use with gloved hands while being undercut to allow as high a grip as possible, and a set of metal tactical 3-dot sights allow for one-handed manipulation of the slide on a belt.

Take-down of the P-10 will be familiar to most fans of striker-fired guns, and even more pleasing will be holster compatibility with some of the most common guns on the market. This model has a 10RD capacity.

Must ship to a U.S. FFL dealer

01544

Out of stock

Out of stock
CZ P-10F Threaded Barrel, Night Sights, 9mm - Gray

CZ P-10F Threaded Barrel, Night Sights, 9mm - Gray

P-10 F is unsurpassed in the striker-fired world when it comes to flush-fitting mags. The longer slide and barrel bring a better sight radius, meaning it’s even easier to be accurate with. The added weight means it shoots flatter and reduced felt recoil.

One change that happens on both the US-made and Czech-made P-10s is the switch to a swappable magazine release. With a change in geometry, the goal was to eliminate the stiffness some customers experienced as the magazine release broke in, even though it became smooth after some use. This new reversible release just requires a few minutes to swap, allowing the P-10 to remain lefty-friendly.

The P-10’s trigger is designed to minimize creep and stacking, and after initial break-in averages a clean 4.5-5 lb pull and rebounds with a short, positive reset — meaning single shots can be meticulously placed while follow-ups are effortless. Built to withstand the rigors of military use, its fiber-reinforced polymer frame and hardy nitride finish are made for the daily grind. A generous trigger guard allows use with gloved hands while being undercut to allow as high a grip as possible, and a set of metal tactical 3-dot sights allow for one-handed manipulation of the slide on a belt.

Take-down of the P-10 will be familiar to most fans of striker-fired guns, and even more pleasing will be holster compatibility with some of the most common guns on the market.

Must ship to a U.S. FFL dealer

91544

Out of stock

Out of stock
CZ P-10F, .45ACP - BLK

CZ P-10F, .45ACP - BLK

CZ's P-10 pistol features a grip angle which avoids that "brick-in-the-hand" feeling that has plagued many in the striker-fired genre, allowing it to point naturally. A mild palm swell, deep beavertail, and three interchangeable backstraps make the P-10 fit a wide variety of hands as if it were built for them. Its trigger is designed to minimize creep and stacking, and rebounds with a short, positive reset, meaning single shots can be meticulously placed while follow-ups are effortless. The fiber-reinforced polymer frame and hardy nitride finish are made for the daily grind. A generous trigger guard allows use with gloved hands while being undercut to allow as high a grip as possible. It features an ambidextrous slide release and swappable mag release. Ships with two 13RD magazines and hard case. Must ship to a U.S. FFL dealer

91590

Out of stock

Out of stock

CZ Guns

Two letters can stand for a stronger defense. CZ guns have been manufactured to discriminating standards for decades. The guns include desirable features such as hammer forged barrels, tight tolerances and ergonomic grips and controls. The CZ goal is to be a global leader in the manufacture of small arms. Advanced technology, intensive testing, and expert machining contribute to the great reputation behind a CZ gun. The famous CZ 75B pistol is a fixture in government, military, and police forces. It has a trademark all-steel construction in its full pistol size. Unique characteristics are incorporated into the CZ lines, offering owners compacts, safety features, and sight options. The compacts are similar to the full size CZ 75 while delivering a weight and bulk that’s more comfortable to carry. Cases and manuals accompany all CZ orders. Additional options for protective gun storage are also on our site at a savings.

CZ Pistols Feature Advanced Materials for Endurance

When you purchase one of our CZ pistols, you receive a 9mm gun built with advanced materials. With every member of the CZ pistol family, you’ll gain improved recoil control, smoother action and definitive accuracy. Need a competition pistol? A CZ could be your performer of choice. For safety’s sake, a CZ 9mm compact features a decocker for less discharge risk. It also comes with fixed luminescent sights, two 14-round gun magazines, and more. The Omega version of a CZ 75B operates beyond expectations with a thumb safety, two 16-round mags and an enhanced trigger design. The police model of these popular pistols adds extra safety with a loaded chamber indicator. The CZ Dan Wesson 1911 pistols are excellent options with 10mm or .45acp caliber, forged, match grade barrel and bushing and Ed Brown Bullet-Proof parts.


The CZ brand is a prolific manufacture of firearms. With high production numbers that are only matched by their quality. Top Gun Supply keeps many of their models in stock. CZ offers many models that vary in design and caliber.

CZ or ‘Česká zbrojovka’ translates to ‘Czech armory’ founded in 1937 this manufacturer has a rich history of producing quality firearms at affordable prices due to their manufacturing methods and resources.

As found on their website about the USA representation.

Headquartered in Kansas City, KS since 1998, CZ-USA is an importer, manufacturer and distributor of pistols, rifles, shotguns and suppressors. The exclusive US importer of rifles and pistols from Česká zbrojovka a.s. Uherský Brod, (CZUB) of the Czech Republic, CZ-USA also designs and imports the CZ-USA Field Sports line of shotguns from Turkey. Fine 1911s and revolvers are made by subsidiary Dan Wesson and a growing line of CZ-USA suppressors is available for rimfire and centerfire firearms.

CZ does not sell direct to consumers but instead uses fully authorized dealers like Top Gun Supply to offer their fine guns to the United States marketplace.

CZ makes the popular Bren and Scorpion models that have the look at feel many appreciate for both sport and self defense use.

Top Gun also carries many of their 9MM and 45ACP models that are popular for their value, and dependability.