Shop by:
More
Dan Wesson
more...
Products
Dan Wesson 715 Pistol Pack, 4", 6", 8" Barrels, .357 Magnum, Stainless Steel
|
Dan Wesson 715 Pistol Pack chambered in .357 Magnum. Ships with the following Barrels 4", 6", 8" The 715 is as it was before – designed and built to be the most accurate, rugged and versatile revolver on the market. The double action trigger is short and relatively light, while the single action is light and crisp. The target-like SA trigger pull made the Dan Wesson revolver a favorite among competitors and hunters, and the tradition continues in the 715.
Barrel assemblies and grips are easily swapped by the shooter, and the 715 accepts grips and barrel/shroud assemblies from 15-2 model and newer revolvers. |
01935
Out of stock
Dan Wesson Bruin, 10mm, Black
|
With more folks than ever choosing to hunt with a handgun and the continuing resurgence of the 10mm cartridge, we decided it was time to bring the heat. Our first long-slide 1911, the Bruin was born to hunt. The long slide means a long sight radius and the 6 inch barrel within allows full-power 10mm loads as much time as possible to use their powder charge. Fully adjustable tritium sights ensure when shooting hours arrive, you will be able to see the sights. Not only that, but we are using a tritium/fiber optic combo front sight to make sure the front glows day or night.
|
01880
Out of stock
Dan Wesson ECO, 9mm, Black
|
A lightweight single-stack officer size 1911 with high quality parts, and attention to detail that you can expect when choosing Dan Wesson. Weighing in at only 25oz, the Dan Wesson ECO features an anodized aluminum frame with rounded mainspring housing coupled with a 3.5" barrel and slide. Finished with the very tough duty black finish (slide/parts only), slim line G10 grips, dot over dot night sights, flush cut barrel with target crown, 25lpi checkering, and a flatwire recoil spring that helps reduce recoil as well as substantially reduce replacement intervals. The Dan Wesson ECO is a compact, lightweight and reliable 1911 designed specifically for every day carry. Comes with two 8RD magazines and case. |
01968
Out of stock
Dan Wesson ECP, 9mm, Black
|
Everybody loves a bull barrel! Bringing the heavy, match-grade barrel from our Officer-size ECO to a bit bigger platform, the Enhanced Commander Pistol is a 4” gun that conceals well but is a tack-driver at the range. Our new tapered G10 grips and a bobbed mainspring housing enhance its ergonomics, affording shooters with smaller hands an easier reach to the trigger. A tri-topped slide wears aggressive side serrations and a top rib to knock down glare, while our new U-notch rear sight is matched to our brass-beaded front sight. The bull barrel itself is flush-cut to make for easier disassembly and has a 30 degree crown. With a similar recoil system to the ECO, it has a flat wire recoil spring that is rated for 15,000 rounds – three times the round count of a typical 1911 dual recoil spring setup. With a compact size that melts away when concealed and a beefy bull barrel, the ECP is an ideal 1911 for everyday carry.
|
01884
Out of stock
Dan Wesson Heirloom, 45ACP, SS
|
The second installment in Dan Wesson's limited-release Heirloom series, the 2021 edition has ample, yet tasteful engraving on its sides and top. Sights are the increasingly-popular brass bead in front and the tactical U-notch in the rear that allows the pistol to be racked on a belt if need be. With a lightly brushed finish on its stainless steel frame and slide, the round top and GI-style serrations give it a classic look, and bison bone stocks finish it off nicely. Ships with two 8RD magazines. |
01804
Out of stock
Dan Wesson Pointman 45 .45ACP, SS
|
The Pointman series has been offered in limited quantities in the past, and demand always outpaces production capacity. Featuring our serrated rib on top of the forged slide, it has an adjustable target sight in the rear and fiber optic sight in the front, and front and rear cocking serrations. The frame is forged stainless with an undercut triggerguard and 25-LPI frontstrap checkering. The flats are polished to a soft brushed finish, and the rounds are sandblasted for a nice contrast. Double diamond cocobolo grips finish it off. 8 + 1 magazine capacity. chmbered in 45ACP.
|
01943
Out of stock
Dan Wesson Pointman 9, SS
|
The Pointman series is built for the range, with an adjustable target rear sight and fiber optic front. Its forged slide has the Clark-style rib running between the sights to reduce glare and has front and rear cocking serrations to enable easy manipulation. The forged stainless frame has an undercut trigger guard to get the hand a little higher on the pistol and 25 LPI front strap checkering to hold it firmly in place without being too harsh. Flats on this pistol are soft brushed while the rounds are sandblasted, giving a nice contrast. Double diamond cocobolo grips finish it off.
|
01942
Out of stock
Dan Wesson Pointman Carry, .45 ACP, SS
|
A fully stainless take on the CCO concept (Commander-length slide with an Officer frame), the Pointman Carry is easily concealed while being incredibly comfortable to shoot. With Features closely mirroring the full-size Pointman Nine, its reduced grip length makes it disappear, even under thin cover garments.
|
01843
Out of stock
Dan Wesson Razorback, 10mm, SS
|
The RZ-10 is a 5-inch 1911 and features a serrated Clark-style target rib machined on the top of the slide with fixed defensive sights. It is fitted with a match-grade ramped barrel for use with the most popular 10mm load and smoother feeding. The slide is mated to Dan's standard forged frame with undercut trigger guard and smooth front strap. On both the frame and the slide features polish flats for a soft brushed finish and sandblast the rounds. The gun is finished off with a nice set of double diamond cocobolo grips. Chambered in the powerful 10mm cartridge, the Razorback is a very versatile 1911 package suitable for defensive use, target shooting and handgun hunting of medium-sized game up to deer or wild boar. Ship with two 8RD magazines. |
01889
Out of stock
Dan Wesson Specialist, 10mm, SS
|
The Specialist features a new style light rail frame (as seen on the Kodiak) as well as forward cocking serrations and Dan Wesson inset slide serrations that reduce glare between the sights. The stainless steel slide has a 1913-style rail integrated into it for installation of lights and lasers, while the undercut trigger guard and 25 LPI frontstrap checkering help plant the pistol. Controls are prominent, with an ambidextrous thumb safety, extended magazine release and a magwell to facilitate quick reloads. Finished off with a set of G-10 grips that guide the hand up and into the extended beavertail, the Specialist is topped with a set of tritium sights front and rear, the back sight configured in a stacked dot style. Ships with two 8RD magazines. |
01815
Out of stock
Dan Wesson Specialist, 45ACP, Black
|
The Specialist features a new style light rail frame (as seen on the Kodiak) as well as forward cocking serrations and Dan Wesson inset slide serrations that reduce glare between the sights. The stainless steel slide has a 1913-style rail integrated into it for installation of lights and lasers, while the undercut trigger guard and 25 LPI frontstrap checkering help plant the pistol. Controls are prominent, with an ambidextrous thumb safety, extended magazine release and a magwell to facilitate quick reloads. Finished off with a set of G-10 grips that guide the hand up and into the extended beavertail, the Specialist is topped with a set of tritium sights front and rear, the back sight configured in a stacked dot style. Ships with two 8RD magazines. |
01801
Out of stock
Dan Wesson Specialist, 45ACP, SS
|
The Specialist features a new style light rail frame (as seen on the Kodiak) as well as forward cocking serrations and Dan Wesson inset slide serrations that reduce glare between the sights. The stainless steel slide has a 1913-style rail integrated into it for installation of lights and lasers, while the undercut trigger guard and 25 LPI frontstrap checkering help plant the pistol. Controls are prominent, with an ambidextrous thumb safety, extended magazine release and a magwell to facilitate quick reloads. Finished off with a set of G-10 grips that guide the hand up and into the extended beavertail, the Specialist is topped with a set of tritium sights front and rear, the back sight configured in a stacked dot style. Ships with two 8RD magazines. |
01802
Out of stock
Dan Wesson Specialist, 9mm, SS
|
The Specialist features a new style light rail frame (as seen on the Kodiak) as well as forward cocking serrations and Dan Wesson inset slide serrations that reduce glare between the sights. The stainless steel slide has a 1913-style rail integrated into it for installation of lights and lasers, while the undercut trigger guard and 25 LPI frontstrap checkering help plant the pistol. Controls are prominent, with an ambidextrous thumb safety, extended magazine release and a magwell to facilitate quick reloads. Finished off with a set of G-10 grips that guide the hand up and into the extended beavertail, the Specialist is topped with a set of tritium sights front and rear, the back sight configured in a stacked dot style. Ship with two 10RD magazines. |
01807
Out of stock
Dan Wesson TCP, 9mm, Black
|
Combining a match grade bull barrel and railed alloy frame, the Tactical Commander Pistol (TCP) sits in the sweet spot of concealability and shootability. Its compact stainless slide is tri-topped and has aggressive slide serrations. A Clark-style top rib helps reduce glare and it features an U-notch rear sight with a brass-beaded front sight. The ramped bull barrel has a 30 degree crown and is flush cut for easier disassembly. Its recoil system uses a similar flat wire recoil spring from CZ's ECO. The grip features a tapered profile that is slim at the top and full-width at the bottom. The TCP also has an one-piece magwell, flat K-style trigger and square hammer. This 9mm model has a 4" barrel and a black finish. |
01845
Out of stock
Dan Wesson V-Bob, .45ACP, BLK
|
Little brother to the Valor, the V-Bob is a Commander-size variant with a bobbed mainspring housing to boot. Ideal as a concealed carry piece, it has a shorter 4.25 Match-grade barrel. It features a set of tapered grips, tactical ambidextrous safety, and style slide stop is recessed, allowing for the use of laser grip panels. Our new inset serrations knock down the glare between the sights a serrated U-notch in the rear and a tritium with a large orange ring in the front. Comes with two 8RD magazines and case. |
01826
Out of stock
Dan Wesson V-Bob, .45ACP, SS
|
The popular Dan Wesson Bobtail Commander is a limited run in the Valor series in the form of the V-Bob. The V-Bob is loaded with features, including a forged Bobtail frame with 25 LPI checkering front and back, an undercut trigger guard, tactical ledge night sights, black G10 grips, EGW carry bevel bushings as well as our tool-steel fire controls and other premium small parts. Every piece that goes into the Valor series is hand-fit, polished and blended to provide you with not only the best functioning gun we can provide, but also the best looking. Comes with two 8RD magazines and case. |
01827
Out of stock
Dan Wesson V-Bob, .45ACP, Two Tone
|
Little brother to the Valor, the V-Bob is a Commander-size variant with a bobbed mainspring housing to boot. Ideal as a concealed carry piece, it has a shorter 4.25 Match-grade barrel. It features a set of tapered grips, tactical ambidextrous safety, and style slide stop is recessed, allowing for the use of laser grip panels. Our new inset serrations knock down the glare between the sights a serrated U-notch in the rear and a tritium with a large orange ring in the front. |
01825
Out of stock
Dan Wesson Valor, .45ACP
|
With a bevy of changes, the Valor now features a Stan Chen SI magwell, tapered grips and a tactical ambidextrous safety. It utilizes Dan's style slide stop is recessed, allowing for the use of laser grip panels. Sitting atop the slide are a serrated U-notch rear sight and a front tritium with a large orange ring, while GI-style cocking serrations give it a classic look. The inset serrations not only knock down any glare from the top of the slide. Black Duty Stainless slide with G10 grips. Ships with one 8RD magazine. |
01823
Out of stock