Shop by:
BCM
more...
Products
BCM Lower w/ BCM Stock Mod 0 - BLK
|
Bravo's BMC Lower Receiver Group with Stock has a carbine h buffer type, a BCM Mod 3 pistol grip, and a BCM enhanced trigger guard.
|
LRG-STK-MOD-0-BLK
Out of stock
BCM RECCE-14 MCMR 5.56mm 14.5" Rifle
|
BCM RECCE 14 MCMR features a USGI chrome lined steel barrel with a manganese phosphate finish with a barrel length of 14.5" with Permanent MOD 1 Compensator 16.1"+, aluminum receiver with a hard-coat anodized finish, M4 Feed Ramp Barrel Extension, M4 Feed Ramp Flat Top Receiver and fire controls marked SAFE and SEMI. Includes one magazine, cable lock, USGI Manual and FET. Made in the USA.
|
780750
Out of stock
Bravo Company Gunfighter Grip Mod 3 - FDE
|
BCM-GFG-MOD-3-FDE
Out of stock
Bravo Company Gunfighter Mod 0 Stock SOPMOD CHEEKWELD- BLK
|
Bravo Company's BCMGUNFIGHTER Mod 0 Stock Assembly is the strongest light-weight polymer stock available for your mil-spec receiver extension with a more pronounced cheekweld (SOPMOD type).Features a snag free Design- no sharp edges, prevent tangling of the rifle with the shooter's sling or molle gear, Modular VBOST (Vehicle Borne Operations Sling Tab) this tab interfaces with the shooter's riggers' band or bungee to secure the shooter's sling against the stock when the carbine is not in use, two different types of ambidextrous sling mounting options, including QD swivel sockets. Simple modular design - 6 parts and 1 screw allow for modular adaption of future stock options and configurations. |
GFS-MOD0-SPMD-BLK
Out of stock
Bravo Company Gunfighter Mod 0 Stock - BLK
|
Bravo Company's BCMGUNFIGHTER Mod 0 Stock is the strongest light-weight polymer stock available for your mil-spec receiver extension. Features a snag free Design- no sharp edges, prevent tangling of the rifle with the shooter's sling or molle gear; Modular VBOST (Vehicle Borne Operations Sling Tab) this tab interfaces with the shooter's riggers' band or bungee to secure the shooter's sling against the stock when the carbine is not in use; two different types of ambidextrous sling mounting options, including QD swivel sockets. Simple modular design: 6 parts and 1 screw allow for modular adaption of future stock options and configurations. |
GFS-MOD-0-BLK
In stock
$55.95
Bravo Company Gunfighter Mod 0 Stock - FDE
|
Bravo Company's BCMGUNFIGHTER Mod 0 Stock is the strongest light-weight polymer stock available for your mil-spec receiver extension. Features a snag free Design- no sharp edges, prevent tangling of the rifle with the shooter's sling or molle gear; Modular VBOST (Vehicle Borne Operations Sling Tab) this tab interfaces with the shooter's riggers' band or bungee to secure the shooter's sling against the stock when the carbine is not in use; two different types of ambidextrous sling mounting options, including QD swivel sockets. Simple modular design: 6 parts and 1 screw allow for modular adaption of future stock options and configurations. |
GFS-MOD-0-FDE
In stock
$55.95
Bravo Company Gunfighter Charging Handle Mod 3B - Large Latch
|
Charging Handle forged from 7075 T6 Aluminum Hard Coat Anodized per Mil-A-8625F, Type III, Class 2 The Mod 3B latch extends past the main body of the charging handle by approximately 1.14". For comparison a USGI handle latch extended past the main body of the charging handle by approximately .85" Compatible with Mil-Spec AR-15 Direct Impingement Weapon Systems. **NOT compatible with adjustable gas keyed bolt carrier groups.**Driven by over a decade of feedback from real-world combat operations, BCM® has made continual design refinements and structural improvements to the charging handle in the M4 and M16 to address the current manual of arms for the weapon system. Optimizing the contours into a snag-free profile that facilitates immediate manipulation with an end user’s reaction side grip. The range of BCMGUNFIGHTER™ Charging Handles is available with both ambidextrous and MIL-SPEC controls. Redesigned to eliminate the load on the pivot pin (like USGI handle fitted with an extended latch) and keep the energy from charging close the centerline of the carbine/rifle, BCMGUNFIGHTER™ Charging Handles provides an larger uninterrupted engagement surface with a smaller silhouette.
|
BCM-GFH-MOD3B-556
In stock
$74.95
Bravo Company Gunfighter Charging Handle Mod 4B - Medium Latch
|
Charging Handle forged from 7075 T6 Aluminum Hard Coat Anodized per Mil-A-8625F, Type III, Class 2 The Mod 4B latch extends past the main body of the charging handle by approximately .91". For comparison a USGI handle latch extended past the main body of the charging handle by approximately .85" Compatible with Mil-Spec AR-15 Direct Impingement Weapon Systems. **NOT compatible with adjustable gas keyed bolt carrier groups.**Driven by over a decade of feedback from real-world combat operations, BCM® has made continual design refinements and structural improvements to the charging handle in the M4 and M16 to address the current manual of arms for the weapon system. Optimizing the contours into a snag-free profile that facilitates immediate manipulation with an end user’s reaction side grip. The range of BCMGUNFIGHTER™ Charging Handles is available with both ambidextrous and MIL-SPEC controls. Redesigned to eliminate the load on the pivot pin (like USGI handle fitted with an extended latch) and keep the energy from charging close the centerline of the carbine/rifle, BCMGUNFIGHTER™ Charging Handles provides a larger uninterrupted engagement surface with a smaller silhouette.
|
BCM-GFH-MOD4B-556
In stock
$74.95
Bravo Company Vertical Grip Mod 3 M-LOK - BLK
|
This vertical pistol grip has a hinged trap door which offers storage inside the grip with a water resistant rubber gasket. It features an extended forward tang to close the gap between the trigger guard and pistol grip, a high rise "beavertail" style back strap, and reduces angle for improved ergonomics and trigger control. Direct M-Lok mount, Black. |
BCM-VG-MCMR-MOD3-BK
In stock
$22.99
Bravo Company Vertical Grip Mod 3 M-LOK - FDE
|
This vertical pistol grip has a hinged trap door which offers storage inside the grip with a water resistant rubber gasket. It features an extended forward tang to close the gap between the trigger guard and pistol grip, a high rise "beavertail" style back strap, and reduces angle for improved ergonomics and trigger control. Direct M-Lok mount, Flat Dark Earth. |
BCM-VG-MCMR-MOD3-FDE
In stock
$22.99
Bravo Company Gunfighter Grip Mod 3 - BLK
|
BCM-GFG-MOD-3-BLACK
In stock
$19.99