BCM

Products

Bravo Company Gunfighter Charging Handle Mod 3B - Large Latch

Bravo Company Gunfighter Charging Handle Mod 3B - Large Latch

Charging Handle forged from 7075 T6 Aluminum

Hard Coat Anodized per Mil-A-8625F, Type III, Class 2
The Mod 3B latch extends past the main body of the charging handle by approximately 1.14".
For comparison a USGI handle latch extended past the main body of the charging handle by approximately .85"


Compatible with Mil-Spec AR-15 Direct Impingement Weapon Systems.

**NOT compatible with adjustable gas keyed bolt carrier groups.**
Driven by over a decade of feedback from real-world combat operations, BCM® has made continual design refinements and structural improvements to the charging handle in the M4 and M16 to address the current manual of arms for the weapon system.
Optimizing the contours into a snag-free profile that facilitates immediate manipulation with an end user’s reaction side grip. The range of BCMGUNFIGHTER™ Charging Handles is available with both ambidextrous and MIL-SPEC controls.
Redesigned to eliminate the load on the pivot pin (like USGI handle fitted with an extended latch) and keep the energy from charging close the centerline of the carbine/rifle, BCMGUNFIGHTER™ Charging Handles provides an larger uninterrupted engagement surface with a smaller silhouette.

BCM-GFH-MOD3B-556

In stock

$49.95

Bravo Company Gunfighter Charging Handle Mod 4B - Medium Latch

Bravo Company Gunfighter Charging Handle Mod 4B - Medium Latch

Charging Handle forged from 7075 T6 Aluminum
Hard Coat Anodized per Mil-A-8625F, Type III, Class 2
The Mod 4B latch extends past the main body of the charging handle by approximately .91".

For comparison a USGI handle latch extended past the main body of the charging handle by approximately .85"

Compatible with Mil-Spec AR-15 Direct Impingement Weapon Systems.

**NOT compatible with adjustable gas keyed bolt carrier groups.**
Driven by over a decade of feedback from real-world combat operations, BCM® has made continual design refinements and structural improvements to the charging handle in the M4 and M16 to address the current manual of arms for the weapon system.
Optimizing the contours into a snag-free profile that facilitates immediate manipulation with an end user’s reaction side grip. The range of BCMGUNFIGHTER™ Charging Handles is available with both ambidextrous and MIL-SPEC controls.
Redesigned to eliminate the load on the pivot pin (like USGI handle fitted with an extended latch) and keep the energy from charging close the centerline of the carbine/rifle, BCMGUNFIGHTER™ Charging Handles provides a larger uninterrupted engagement surface with a smaller silhouette.

BCM-GFH-MOD4B-556

In stock

$49.95

Bravo Company Gunfighter Grip Mod 3 - BLK

Bravo Company Gunfighter Grip Mod 3 - BLK

  • Reduced angle for improved ergonomics and trigger control
  • Hinged trap door offering storage inside the grip with a water resistant rubber gasket
  • Each grip features an extended forward tang to close the gap between the trigger guard and pistol grip, and a high rise "beavertail" style back strap.
  • Up to a quarter of an inch wider than the BCMGUNFIGHTER Mod 0 and Mod 1 grips.
  • Made in the USA and manufactured from high quality impact resistant polymers.
  • Each grip test fit to ensure proper function (may display attributes consistent with this QC process)
  • Fits AR style rifles

BCM-GFG-MOD-3-BLACK

In stock

$18.95

Bravo Company Vertical Grip - BLK

Bravo Company Vertical Grip - BLK

  • Mounted in forward angle increases rigidity of forearm, while providing more natural wrist angle when grabbing the vertical grip.
  • Mounted in reverse angle to increase control when grabbing handguard and vertical grip.
  • Flat sides give better yaw control to the shooter during firing and non-firing manipulations.
  • Aggressive texture and generous storage volume combined with modular design to allow improvements and adaptation in the future.
  • Cross bolt designed to work with improvised tools (such as a quarter) allow for easy adjustment or re-tightening.
  • Hinged trap door offering storage inside the grip with a water resistant rubber gasket.
  • Reversible clamps allow user to setup fasteners to reside on either side.
  • Spring-loaded clamp makes installation and removal easier.
  • Made in the USA and manufactured from high quality impact resistant polymers.

BCM-GFVG-BLACK

In stock

$39.95

Bravo Company Vertical Grip - FDE

Bravo Company Vertical Grip - FDE

  • Mounted in forward angle increases rigidity of forearm, while providing more natural wrist angle when grabbing the vertical grip.
  • Mounted in reverse angle to increase control when grabbing handguard and vertical grip.
  • Flat sides give better yaw control to the shooter during firing and non-firing manipulations.
  • Aggressive texture and generous storage volume combined with modular design to allow improvements and adaptation in the future.
  • Cross bolt designed to work with improvised tools (such as a quarter) allow for easy adjustment or re-tightening.
  • Hinged trap door offering storage inside the grip with a water resistant rubber gasket.
  • Reversible clamps allow user to setup fasteners to reside on either side.
  • Spring-loaded clamp makes installation and removal easier.
  • Made in the USA and manufactured from high quality impact resistant polymers.

BCM-GFVG-FDE

In stock

$39.95

Bravo Company Gunfighter Grip Mod 3 - FDE

Bravo Company Gunfighter Grip Mod 3 - FDE

  • Reduced angle for improved ergonomics and trigger control
  • Hinged trap door offering storage inside the grip with a water resistant rubber gasket
  • Each grip features an extended forward tang to close the gap between the trigger guard and pistol grip, and a high rise "beavertail" style back strap.
  • Up to a quarter of an inch wider than the BCMGUNFIGHTER Mod 0 and Mod 1 grips.
  • Made in the USA and manufactured from high quality impact resistant polymers.
  • Each grip test fit to ensure proper function (may display attributes consistent with this QC process)
  • Fits AR style rifles

BCM-GFG-MOD-3-FDE

In stock

$18.95