Used and recommended by gun manufacturers throughout the industry, Lucas Extreme Duty CLP is designed to clean, lubricate and protect your firearms all in one easy step. Containing high grade additives that dissolve powder residue, penetrates deep into rust, and reduces friction and wear while creating a waterproof, slick film that keeps your firearms well lubricated and protected for prolonged periods. This microscopic layer leaves your firearms clean and protected from fingerprint acids, salt water, and any other rust causing agents. Made in the U.S.A. 4oz bottle.

3 oz. aerosol spray of EEZOX® dry film lube CLP+. Goes on wet and lubricates dry. The unique chemistry was developed specifically for gun care, EEZOX® ELIMINATES stiff actions, jamming, residue build-up, lead and brass build-up, plastic shot wad build-up and galling. EEZOX® allows all guns to function according to factory design and, more importantly, will not impede function.

1. CLEAN

Using only EEZOX®, clean all parts of your firearm, including bore, barrel, magazines, actions, mechanisms, metal surfaces and parts. For heavily fouled or oxidized firearm, allow EEZOX® to sit for several minutes to work its magic. Make sure all residual solvents, greases, waxes and Teflon coatings from previous cleanings or lubes are removed at this time. IT IS NOT NECESSARY TO USE ANY PRODUCT OTHER THAN EEZOX® FOR CLEANING.

2. LUBRICATE

When the firearm is thoroughly cleaned and wiped dry, apply a very light coat of EEZOX® to all parts and allow to dry. If too much EEZOX® has been applied, remove the excess with a soft cloth, being careful to leave only a light coating of EEZOX®

3. PROTECT

Once the last application of EEZOX® has dried, your firearm is ready for use or storage. Although dry, EEZOX® continues to protect, both in use and in storage.

4. FINISH

Once you have your gun thoroughly cleaned and protected with EEZOX®, a quick bore cleaning and wipe down after each time you fire will suffice. You will find that your actions will be much smoother and fouling buildup gets less each time you use EEZOX®. The beautiful finish says it all! JUST EEZOX® IT!

The Pro-Shot Non-Treated Cloth is great for wiping off firearms or just about anything else. Made from 100% cotton flannel cloth.

Pro-Shot Zero Friction is an advanced synthetic lubricant specifically designed for firearms and knives. Containing a combination of Anti-Wear, Anti-Oxidants, and Rust Preventative Additives, to provide superior performance and protection on all metal parts.

The most universally used solvent for removing primer, powder, lead, and metal fouling for preventing rust. It is quick, super-efficient, safe, and easy to use. Nitro Solvent flows freely and penetrates rapidly.

Used and recommended by gun manufacturers throughout the industry, Lucas Extreme Duty Contact Cleaner is a unique blend of solvents and cleaning agents designed to blast away powder residue, grease, oil and other debris from firearm actions slides, barrels and parts with its high pressure spray. Able to displace water, Lucas Extreme Duty Contact cleaner is quick drying and leaves zero residue, making it ideal for final degreasing prior to bluing, parkerizing, or spray finish applications. Safe on your firearm's metal finishes and will not harm polymers subjected to incidental contact. Made in the U.S.A. 11oz canister.

Pro-Shot Pro Gold Lube is a high-quality, superior performance grease developed for firearm lubrication and protection. Superior performance on stainless, chrome moly, nickel, and blued firearms. Easy to use syringe allows for a no mess application to high wear areas such as: locking lugs, actions, frame rails, hinge pins, and camming surfaces. Clings to metal surfaces without gumming up, and is heat as well as water resistant in order to protect your investment from harsh conditions.

Used and recommended by gun manufacturers throughout the industry, Lucas Extreme Duty CLP is designed to clean, lubricate and protect your firearms all in one easy step. Containing high grade additives that dissolve powder residue, penetrates deep into rust, and reduces friction and wear while creating a waterproof, slick film that keeps your firearms well lubricated and protected for prolonged periods. This microscopic layer leaves your firearms clean and protected from fingerprint acids, salt water, and any other rust causing agents. Made in the U.S.A. 11oz aerosol can.

1.5 oz. Dropper of EEZOX® dry film lube CLP+. Goes on wet and lubricates dry. The unique chemistry was developed specifically for gun care, EEZOX® ELIMINATES stiff actions, jamming, residue build-up, lead and brass build-up, plastic shot wad build-up and galling. EEZOX® allows all guns to function according to factory design and, more importantly, will not impede function.

1. CLEAN

Using only EEZOX®, clean all parts of your firearm, including bore, barrel, magazines, actions, mechanisms, metal surfaces and parts. For heavily fouled or oxidized firearm, allow EEZOX® to sit for several minutes to work its magic. Make sure all residual solvents, greases, waxes and Teflon coatings from previous cleanings or lubes are removed at this time. IT IS NOT NECESSARY TO USE ANY PRODUCT OTHER THAN EEZOX® FOR CLEANING.

2. LUBRICATE

When the firearm is thoroughly cleaned and wiped dry, apply a very light coat of EEZOX® to all parts and allow to dry. If too much EEZOX® has been applied, remove the excess with a soft cloth, being careful to leave only a light coating of EEZOX®

3. PROTECT

Once the last application of EEZOX® has dried, your firearm is ready for use or storage. Although dry, EEZOX® continues to protect, both in use and in storage.

4. FINISH

Once you have your gun thoroughly cleaned and protected with EEZOX®, a quick bore cleaning and wipe down after each time you fire will suffice. You will find that your actions will be much smoother and fouling buildup gets less each time you use EEZOX®. The beautiful finish says it all! JUST EEZOX® IT!

Vortex Optics Lens Cloth is a lint-free microfiber cloth designed to remove oil, fingerprints or smudges from your optic.

Vortex Optics Fog-Free Lens Cleaning System features an optic brush for removing dirt, a micro-fiber cloth for removing smudges, and anti-fog cleaner that keeps lenses fog free for up to seven days. Fits easily in a pocket or carry case for field use.

Enos Slide Glide - Heavy

• Very Low Viscosity, Penetrates Hard to Get to Areas
• Ideal for Extreme Cold Weather Use
• Excellent for Precision-Fit Firearms
• Recommended for Tightly Fitted Handguns of Minor Calibers (9mm, .38 Super, etc.)

TW25B® SYNTHETIC GUN GREASE super-lubricates heavy wear parts for optimal firearms performance, ideal for lubricating slides, rails and all wear parts. As a bore treatment, proven to increase muzzle velocity and tighten spread. TW25B® synthetic gun grease penetrates the pores of metal surfaces and creates a roller bearing smooth surface, giving you more shooting with a lot less gun cleaning. The choice of U.S. Navy SEALS and U.S. Special Forces worldwide …officially specified lubricant of SIG SAUER. 4oz tube.

Vortex Optics Lens Pen lets you gently remove dust with the lens friendly retractable brush and wipe away smudges with the cleaning tip. Filled with a non-liquid cleaning compound that will not dry or spill.

Break Free CLP contains specially formulated polymerized synthetic oils that breaks loose powder fouling, oil, grease, and corrosion that can damage metal surfaces. Can also be used to free sticky, rusted, or corroded mechanisms. Additionally, Break Free CLP has superior lubricating qualities to keep actions working smoothly and malfunction free. 4 ounce bottle.

.95 oz. Oiler with needle applicator of EEZOX® dry film lube CLP+. Goes on wet and lubricates dry. The unique chemistry was developed specifically for gun care, EEZOX® ELIMINATES stiff actions, jamming, residue build-up, lead and brass build-up, plastic shot wad build-up and galling. EEZOX® allows all guns to function according to factory design and, more importantly, will not impede function.

1. CLEAN

Using only EEZOX®, clean all parts of your firearm, including bore, barrel, magazines, actions, mechanisms, metal surfaces and parts. For heavily fouled or oxidized firearm, allow EEZOX® to sit for several minutes to work its magic. Make sure all residual solvents, greases, waxes and Teflon coatings from previous cleanings or lubes are removed at this time. IT IS NOT NECESSARY TO USE ANY PRODUCT OTHER THAN EEZOX® FOR CLEANING.

2. LUBRICATE

When the firearm is thoroughly cleaned and wiped dry, apply a very light coat of EEZOX® to all parts and allow to dry. If too much EEZOX® has been applied, remove the excess with a soft cloth, being careful to leave only a light coating of EEZOX®

3. PROTECT

Once the last application of EEZOX® has dried, your firearm is ready for use or storage. Although dry, EEZOX® continues to protect, both in use and in storage.

4. FINISH

Once you have your gun thoroughly cleaned and protected with EEZOX®, a quick bore cleaning and wipe down after each time you fire will suffice. You will find that your actions will be much smoother and fouling buildup gets less each time you use EEZOX®. The beautiful finish says it all! JUST EEZOX® IT!

18 oz. aerosol spray of EEZOX® dry film lube CLP+. Goes on wet and lubricates dry. The unique chemistry was developed specifically for gun care, EEZOX® ELIMINATES stiff actions, jamming, residue build-up, lead and brass build-up, plastic shot wad build-up and galling. EEZOX® allows all guns to function according to factory design and, more importantly, will not impede function.

1. CLEAN

Using only EEZOX®, clean all parts of your firearm, including bore, barrel, magazines, actions, mechanisms, metal surfaces and parts. For heavily fouled or oxidized firearm, allow EEZOX® to sit for several minutes to work its magic. Make sure all residual solvents, greases, waxes and Teflon coatings from previous cleanings or lubes are removed at this time. IT IS NOT NECESSARY TO USE ANY PRODUCT OTHER THAN EEZOX® FOR CLEANING.

2. LUBRICATE

When the firearm is thoroughly cleaned and wiped dry, apply a very light coat of EEZOX® to all parts and allow to dry. If too much EEZOX® has been applied, remove the excess with a soft cloth, being careful to leave only a light coating of EEZOX®

3. PROTECT

Once the last application of EEZOX® has dried, your firearm is ready for use or storage. Although dry, EEZOX® continues to protect, both in use and in storage.

4. FINISH

Once you have your gun thoroughly cleaned and protected with EEZOX®, a quick bore cleaning and wipe down after each time you fire will suffice. You will find that your actions will be much smoother and fouling buildup gets less each time you use EEZOX®. The beautiful finish says it all! JUST EEZOX® IT!