Each pad features a 3-by-5 matrix. Number your mags using a Sharpie or paint pen. Additional space is available to write your initials.

Weight Comparison – P320

• Brass (P320 Extended Pad) – 3.75 ounces
• Brass (P320 Standard) – 1.1 ounce
• Grayguns Hard Duty Use Aluminum Pads (P320) – About 1 ounce
• OEM P320 base pads – About .20 ounces

For the P320 series, base pads are designed to work with full-size magazines in X-Series grip modules with – and without – the magwell installed. Will work with 21-round magazines and will work with standard P320 grip modules.

Base pads are compatible with new SIG P320 magazines with the square pegs. 1 per package.

Each pad features a 3-by-5 matrix. Number your mags using a Sharpie or paint pen. Additional space is available to write your initials.

Weight Comparison – P320

• Brass (P320 Extended Pad) – 3.75 ounces
• Brass (P320 Standard) – 1.1 ounce
• Grayguns Hard Duty Use Aluminum Pads (P320) – About 1 ounce
• OEM P320 base pads – About .20 ounces

For the P320 series, base pads are designed to work with full-size magazines in X-Series grip modules with – and without – the magwell installed. Will work with 21-round magazines and will work with standard P320 grip modules.

Base pads are compatible with new SIG P320 magazines with the square pegs. 1 per package.

Designed for hard-duty use. Our custom Grayguns SIG Sauer P320 magazine base pads are manufactured from 6061 Aluminum. Professionally finished with MIL-A-8625 Type III anodized coating. Pads go through a glass-beading process to provide a flat-black finish.

The base pad is the same thickness as the OEM SIG base pad. A relief cut on the sides enhances malfunction drills, and allows for effective one-handed reloads using the belt or holster.

The cut mirrors the normal P320 module’s and creates a cut for the X-Series modules.

Each pad features a 3-by-5 matrix. Number your mags using a Sharpie or paint pen. Additional space is available to write your initials.

• This the Extended Version Designed for the full-size magazine in a XSeries with the magwell. Also works with 21-round magazines and fits the standard P320.

Note: These base pads are compatible with new SIG P320 magazines with the square pegs.

Replicate our custom in-house short reset conversion with a drop-in kit for your HK P30 with thumb safety. Cut from bar stock steel, these kits provide an exacting fit for easy install.

The kit shortens the reset travel distance by about one-third, reduces trigger over-travel and reduces pull weight while maintaining all factory safety functions.

This kit is specific to the HK P30 model with a thumb safety, including DA/SA and LEM variations.

The kit works with all variants of the HK P30 with a thumb safety including:

• P30
• P30L
• P30SK

Will not work with CDA LEM 4.1 trigger.

The parts provided – control latch, extended sear roll pin and firing pin block spring – are designed to be installed together as a complete system.

Replicate our custom in-house short reset conversion with a drop-in kit for your HK P2000 or P30 without a thumb safety. Cut from bar stock steel, these kits provide an exacting fit for easy install.

The kit shortens the reset travel distance by about one-third, reduces trigger over-travel and reduces pull weight while maintaining all factory safety functions.

This kit is specific to the HK P2000 and P30 models without a thumb safety, including DA/SA and LEM variations.

*Does not work with the CDA LEM 4.1 Triggers*

The kit works with all variants of the HK P2000 and P30 models without a thumb safety including:

• P30
• P30L
• P30SK
• P2000
• P2000SK

The parts provided – control latch, extended sear roll pin and firing pin block spring – are designed to be installed together as a complete system.

Bruce Gray combined the best of both worlds when he designed what we know as the hybrid trigger.

The unique face allows the shooter can take advantage of finger placement lower on the face, with the comfort of a traditional curved face. This hybrid design reduces trigger weight while preserving all mechanical safety values.

The Grayguns P320 Hybrid Trigger uses internal leverage changes to yield superior trigger pull, while supporting the voluntary upgrade’s enhanced reliability and rough handling performance qualities.

Includes our adjustable over-travel stop design to shorten reset and take out all gross over-travel. Designed for easy drop-in installation.

Specifically designed for P320s with current fire control unit components, or those who have gone through SIG’s Voluntary Upgrade Program. Designed for demanding duty use, with the toughness to outlast your pistol, our P320 triggers are guaranteed for life.

• Hybrid face design
• Preserves factory sear engagement and all mechanical safety values
• Adjustable over-travel eliminates gross movement after the sear is released and reduces trigger travel to reset
• Enhanced Leverage geometry reduces pull weight by 30% with stock springs
• Smoother takeup, sear release and reset sensation
• Optimal 90⁰ sear release
• Supports Voluntary Upgrade rough handling characteristics for assurance and reliability
• Designed for use with the SIG factory trigger bar spring
• Proven reliable and durable for high-volume professional use
• Limited lifetime warranty on materials and workmanship

Titanium Nitride (TiN)

A well-proven standard layer type through its balanced properties. The golden titanium nitride layer, abbreviated TiN, indicates the following properties:

• High hardness and adhesion
• Good chemical resistance
• Good temperature resistance in air
• Relatively low thermal conductivity
• Attractive, golden color

Fits all variations within the P320 (upgraded) system. Including all sizes, TACOPS Carry, X-VTAC, X-Carry, X-Five and RX versions.

Disclaimer

These parts are intended for installation by a qualified armourer or gunsmith. In some cases professional fitting will be required by a trained, qualified armorer/gunsmith who is very familiar with the pistol’s action. This is due to the varying tolerances present in all mass-produced firearms. Although kits fit with no issues in a great majority of pistols, Grayguns is unable to guarantee perfect functionality in every instance. Grayguns does offer installation services for all parts kits we offer.

Grayguns P365 Compensator softens recoil and flattens muzzle flip yet only adds 1 inch (1.023″) to the overall length. We’ve designed the comp to ensure it will run reliably with your factory recoil spring. Our clever CompLock index and locking system ensure your SIG Sauer P365 compensator aligns perfectly and stays put.

P365 Compensator Specifications

• Custom, Grayguns True Precision barrel, Diamond-Like Carbon (DLC) finished for maximum service life
• Machined from the 7075-T6 aluminum alloy and finished in DLC to complement your factory slide
• The innovative CompLock index system assures perfect alignment and durability
• Adds only 1.023 inches to length; passing the reality check
• DutyComp is optimized for reliable function with defensive ammo using the factory recoil spring assembly; no iffy replacements are required

Our Short Reset System for the HK USP and HK45 replicates the short reset conversion available in our in-house custom action work. Cut from bar stock steel, these kits provide an exacting fit for easy install.

The kit shortens the reset travel distance by about one-third, reduces trigger over-travel and reduces pull weight while maintaining all factory safety functions.

This kit is specific to the HK USP and HK45 models with or without a thumb safety, including DA/SA and LEM variations.

The parts provided – control catch, pin and spring – are designed to be installed together as a complete system.

Kits will not fit the following variants:

• Double Action Only pistols
• MK23
• Early USP models with joined one piece catch, control latch or models that have the short catch that stops the hammer rather than spur. These older versions are rare and usually easily identified because they lack the rubber coating on the hammer thumb stud.