Sig Sauer

Products

Sig Sauer SRD556-QD Suppressor - 5.56mm

Sig Sauer SRD556-QD Suppressor - 5.56mm

The Sig Sauer SRD556-QD is a quick detach suppressor using inconel 718, a Nickel Alloy Stainless Steel, provides the highest level of durability, particularly with short-barreled hosts using supersonic ammunition. The rear mount has wrench flats to torque the silencer to the barrel. There is a secondary retention latch that is depressed to remove the silencer from the fast-attach mount. The SRD556-QD comes with one 1/2"x 28tpi Taper-Lok™ muzzle brake. Utilizes the popular 1/2"x 28tpi threads.

-Length: 6.5x1.625 in

-Weight: 14.0 ounces

-Threads: 1/2-28 tpi

-dB level - 134dB

SRD556-QD

In stock

$629.99

Sig Sauer SRD9 Suppressor - 9mm

Sig Sauer SRD9 Suppressor - 9mm

The Sig Sauer SRD9 9mm Pistol Suppressor features a Grade 9 Titanium tube and 17-4PH Stainless Steel baffles allowing for light weight and durability. The SRD9 features a booster for use with "Browning Tilting Barrel" type pistols. A fixed barrel spacer is also available. The SRD9 ships with both 1/2”x 28tpi and M13.5x1mm LH pistons.

-Length: 7.2 x 1.38 in.

-Weight: 9.0 ounces

-Threads: 1/2-28 tpi / M13.5x1LH

-dB level - 128dB

SRD9

In stock

$679.99

SIG Standard Trigger - P220, P245 Nickel

SIG Standard Trigger - P220, P245 Nickel

SIG factory Standard Nickel Trigger for older production P220 and P245 models with the narrow trigger, 8mm. Will not fit current produced P220's with 10mm trigger.

34221210N

In stock

$39.95

Sig Sauer Locking Insert - SigPro 2022

Sig Sauer Locking Insert - SigPro 2022

Sig Sauer factory Locking Insert for SigPro SP2022 models.

1600022-R

In stock

$64.95

Sig Sauer Magazine Catch - P938 - Nickel

Sig Sauer Magazine Catch - P938 - Nickel

Sig Sauer factory magazine catch for the Sig P938. Satin Nickel finish.

1201637

In stock

$15.95

Sig Sauer P220R Carry .45 DA/SA - IOP

Sig Sauer P220R Carry .45 DA/SA - IOP

Sig Sauer P220R Carry with night sights and E2 grip panels.

W220R3-45-BSS

In stock

LE ID REQUIRED: $799.00

Sig Sauer P226 .40S&W DA/SA - Crimson Trace - USED

Sig Sauer P226 .40S&W DA/SA - Crimson Trace - USED

Used Sig Sauer P226 chambered in .40 S&W. Department trade-ins. Good condition with typical cosmetic holster and frontstrap wear. Expect nicks, scratches, scuffs. Stainless slide, short extractor with German non-railed frame, and Crimson Trace Laser Grips (functioning, with typical scratches and scuffs from duty use). Dim to dead night sights. Barrel wear consistent with duty use. Comes with case, and three 12RD magazines.

P226NR-40-USED

In stock

$499.95

Sig Sauer SRD762-QD Suppressor - 7.62mm

Sig Sauer SRD762-QD Suppressor - 7.62mm

The Sig Sauer SRD762-QD is a quick detach suppressor using inconel 718, a Nickel Alloy Stainless Steel, provides the highest level of durability, particularly with short-barreled hosts using supersonic ammunition. The rear mount has wrench flats to torque the silencer to the barrel. There is a secondary retention latch that is depressed to remove the silencer from the mount. The SRD762-QD is rated up to 300 Win Mag and any other rifle cartridges that are of equal or less projectile diameter, pressure and case capacity. Examples of this would be .204 Ruger, .223/5.56x45mm, 5.45x39mm, 7.62x39mm, 7.62x35 (300 Blackout) 6.5 Grendel, 6.5 Creedmoor, 6.8 Spc, .260 Remington and other cartridges. Utilizes the popular 5/8"-24tpi threads. The SRD762-QD comes with one 5/8"-24tpi Taper-Lok muzzle brake.

-Length: 7.0x1.625 in.

-Weight: 17.0 ounces

-Threads: 5/8"-24 tpi

-dB level - 140dB

SRD762-QD

In stock

$679.00

Sig Sauer Take Down Lever - P239 Blue

Sig Sauer Take Down Lever - P239 Blue

Sig Sauer factory Take Down Lever for P239 models.

34239106

In stock

$19.75

Sig Sauer Trigger Bar - P239 DA/SA

Sig Sauer Trigger Bar - P239 DA/SA

Sig Sauer factory Trigger Bar for P239 DA/SA models.

34239290

In stock

$42.95

Sig Sauer Trigger Bar - P239 DAK

Sig Sauer Trigger Bar - P239 DAK

Sig Sauer factory Trigger Bar for P239 DAK models.

34239282

In stock

$59.95

SIG P225 9mm PARTS KIT

SIG P225 9mm PARTS KIT

Kit Contains:

  • Recoil Spring
  • Trigger Bar Spring
  • Slide Catch Lever Spring
  • Decocking Lever Spring
  • Outer Roll Pin
  • Inner Roll Pin
  • (4) Grip Screws
  • (4) Grip Screw Washers

P225-9-PKIT

In stock

$23.99

Sig Sauer 10mm 180 GR. Elite V-Crown JHP - 20RD

Sig Sauer 10mm 180 GR. Elite V-Crown JHP - 20RD

Sig Sauer 10mm 180 GR. Elite V-Crown Jacketed Hollow Point - 20RD Box

-Muzzle Velocity: 1250 FPS

-Muzzle Energy: 624 FT-LBS

E10MM1-20

In stock

$22.95

Sig Sauer MCX Patrol, .223, 5.56mm

Sig Sauer MCX Patrol, .223, 5.56mm

The culmination of years of hard work and research, the Sig Sauer MCX is a completely modular weapon system built around Sig's proven short stroke gas piston system. The MCX utilizes a two-position gas system to allow the shooter to switch between sonic/subsonic ammo and suppressed/unsuppressed seamlessly. Lightweight aluminum keymod rails, quick change barrel capability, ambidextrous AR-style controls, 16" lightweight barrel, low-profile folding/telescoping stock, and multi-caliber capability (5.56mm, 7.62X39mm, .300 Blackout) in a package weighing under 7lbs makes this platform a serious competitor for LE and civilian service. Comes with one 30RD magazine.

RMCX-16B-TELE-P

In stock

$1849.99

Sig Sauer P239 .357SIG, Nitron, SigLite Night Sights, DA/SA

Sig Sauer P239 .357SIG, Nitron, SigLite Night Sights, DA/SA

The slim profile of this single-stack P239 .357SIG provides easy concealment without sacrificing handling. This pistol comes with SIGLITE® night sights, DA/SA trigger, two 7RD magazines, box, lock and manual.

239-357-BSS

In stock

$849.99

Sig Sauer P250/320 Grip .45ACP Full Size - Large Grip

Sig Sauer P250/320 Grip .45ACP Full Size - Large Grip

Factory Sig Sauer P250 Grip Module allows the shooter to tailor the pistol to meet their specific grip size requirements. Black polymer construction and comes with the magazine catch installed. This is the large grip for the .45ACP P250 Full Size.

*Note: These are the updated Grip Modules which includes a replacement new style slide catch lever, slide catch lever spring, and slide catch post.

1300105

In stock

$39.95

Sig Sauer SRD556 Suppressor - 5.56mm

Sig Sauer SRD556 Suppressor - 5.56mm

The Sig Sauer SRD556 is a direct thread suppressor using inconel 718, a Nickel Alloy Stainless Steel, provides the highest level of durability, particularly with short-barreled hosts using supersonic ammunition. The rear mount has wrench flats to torque the silencer to the barrel. These wrench flats can be used as a location to "pin and weld" the silencer to make a shorter barrel over 16" in total length. Utilizes the popular 1/2"x 28tpi threads.

-Length: 6.4x1.625 in.

-Weight: 11.5 ounces

-Threads: 1/2-28 tpi

-dB level - 133dB

SRD556

In stock

$499.99

Sig Sauer Trigger Bar - P220 DAK

Sig Sauer Trigger Bar - P220 DAK

Sig Sauer factory Trigger Bar for P220 DAK models.

34221251

In stock

$59.95