Products reviews

Magazine loads easy and performs w/o any problems. It's a little pricey, but your getting a name brand & not some knock off. Which makes it worth the price.

The SKS that I received is from 1978. The gun was coated lightly in cosmo. Thankfully the cosmo wasn't heavily slathered on so cleanup was fairly easy. Included with the firearm is a leather ammo pouch. No cleaning kit or sling but not a big deal, really. The rifle has no pitting and no rust, not even surface rust. The bore's excellent, as advertised for a Grade A rifle. All metal parts are great. The wood stock had very little cosmo and, what was there, came off with little effort. After cleanup and oil, the grain in the stock looked and felt a lot better than expected. There are a couple very small handling nicks but they're only visible upon deep inspection. The gun hasn't been fired and I plan to keep it that way. The firearm is Grade A. My interaction with Top Gun has been nothing but positive. I'm glad that I purchased the rifle.

The price was good . holster let my gun ride low on my side. I have Glocks it will work with my 26 ,27 , 19 , 23 , . I would recommend it

I'm really happy with this purchase! I received a 1989, last year of manufacture, SKS 59/66 A1 with brand new leather stripper clip pouch. This rifle was never issued. It was lightly cosmolined, and stock appears to be unfinished. It's got a few smudges from handling and a minor dime sized dent that will steam out if I get the urge, or I may just leave it, it's that insignificant. There is scattered and very minor corrosion from long term storage in some spots. The only obvious one, if you're looking hard, is about the size of 1/4 of a dime on the rear top of the housing cover. No big deal. I'm guessing the storage crates support the gun there and adsorbed some moisture. The enclosed cleaning kit had some external corrosion but is completely useable. The stock ferrules have some scattered rust (tough to see) and a few small light ones (less than 1/8") on the wood-side edge of the trigger group. There is a little bit or rust under the gas tube just under the front of the top stock. The screw heads of the butt plate screws have rust but the integrity of the screws is not affected. The butt plate, trap door assemble is rusty inside (as is the spring at the bottom of the cleaning kit cavity) and although the spring to close the door is functional, it's not enough to close the door when you take your finger out. Generally speaking I mention the corrosion because it's there. I hate rust on a gun, but, I'm quite OK with the minimal amounts and where they're located. Don't look, don't tell as far as I'm concerned. The only one my critical eye caught right away was the one under my nose at the rear of the housing/dust cover. The ferrules and trigger group were mostly found by feel when I was cleaning the cosmoline. The cleaning kit and butt plate screws were obvious (when you stick the butt in your face)

I mentioned the stock is unfinished. It looks like a very straight and close grained piece of birch. It should take a nice finish with just a surface cleanup up of very fine steel wool. Oh, almost forgot, virtually no cosmoline inside the stock. Only a couple of spots which I may have caused upon dissassembly, which wiped right off. This is really OK to finish as you see fit as is. I may use a little acetone and whiting to clean out the internal spots. The outside looks devoid of cosmoline, just some finger smudges.

The bluing is superb and the piston looks like it's chromed, although the Yugoslavian SKSs did not have chrome bores. I wiped down the metal parts with some Kroil and the cosmoline came right off (again, very little, just enough to almost do a perfect anti-rust job. The bolt is almost immobile from the cosmoline, so that, and the bore and internal gas tubes, still need to be done. Not a big deal, strip down is quite easy, no tools necessary, except a bullet or screw driver to push the trigger group release. With that clean up done it's ready to shoot (or just plain admire). Even the internal machining, which you wouldn't see is none cleanly.

The shipping package was open at one end and had been kind of re-taped a little by UPS, but still open so I don't know if a sling was included from my container and fell out or not. No big deal. Absolutely no damage to remaining contents. Thanks Top Gun Supply!

As a longtime 1911 aficionado, I have to say this is one of the finest pistols of any era, mark or style- in my experience, tied only with my 1 1/2 MOA Premier II.
It shoots effortlessly, the added weight is not noticeable in a negative way, rather really only makes itself know when living up to it's role "as advertised", with its added stability for follow-up shots and reduced felt recoil.
Just an all around stunning piece of master craftsmanship- a true legacy firearm destined for heirloom status.

Non brass case 115gr, price was right, great for target practice, TopGun ship super fast. All the way 5 Stars,Thank you

This recoil systems delivers some obvious advantages to the my XD.

I have always loved Blazer Aluminum for in expensive target practice. It is accurate and cheap. Great stuff!

I'd been looking for this part to convert my V3 HK USP .45 into a V1 for several weeks, but until now I hadn't found one in stock anywhere. It was delivered shockingly fast, and was the best price that I've found anywhere. Very easy installation, completely drop-in.

These are just what you need if you convert your old-style Sig Sauer P250 to the new X-Grip. These will allow you to convert your old magazines. I verified that it works without a hitch.

I needed to replace the Crimson Trace Grip on my old Sigpro 2340/.40 Cal with a standard grip. As most SigArms/Sig Sauer users know, the SP 2009/2340 was replaced with the SP 2022 years ago. After checking with SigArms customer service and finding out that that they discontinued SP 2009/2340 parts, including the grips, and that the SP 2022 grip is incompatible, I searched the web for other vendors who still carried the old Sigpro grips and found Top Gun Supply. As Brad told me, their OEM SP 2340 grip snapped right in. It's a perfect fit. Thanks Brad

Bought this magazine for my P320C along with the xgrip adapter and I'm so happy I did! Asking with a hand written thank you note they Came quickly and now I get to have a couple more rounds to train with thank you guys for providing excellent service and satisfaction!

This is a top quality mag very nice.

Works great in my P226! Didn't work at all in my P228. Maybe my 228 is out of spec, or this kit won't work in the 228.

Put this E2 grip on an older model P226 in less then 5 minutes. The E2 grip does make a shorter trigger reach for smaller hands. The texture affords a better grip surface also. For ease of installation, make sure your hammer is in full collapse position when returning main spring assembly into position. A small screwdriver is all that is needed to remove main spring assembly.

While 80%+ seem to have it drop in, I wasn't that lucky. Did require slight fitting on the barrel hood. Once that was done, superb! Function tested it with several of my different reloads with no problem even when using the .40S&W/357SIG recoil spring and magazines! Did start with a 9mm magazine but am thrilled not to have to but more. Will be using this a lot for practice.

This my second EB 1911 purchase and about my 10th purchase from TGS. Both are outstanding! The fit and finish of the gun is incredible. The bluing is beautiful!

Wasn't worried about the price when I ordered a few of these. Makes for more fun at the range! Work perfectly and Top Gun service is great!

Got a few of these with the X-Grip adapter to kick my 23 up a few rounds. Fit 'n finish is factory perfect. Thanks Top Gun!!

I ordered two mags on a friday night and i had them at my door on monday. That was in december i really did not expect them that fast. I got the items i ordered with no problems. The web site was easy to navagate and checkout was just as easy. I could not be more happy. I honestly apreciate the awsome customer service i got, there was even a handwriten thank you from Rachel on my invoice. I will be shopping at Top Gun Supply again. Keep up the good work Top Gun Supply

Perfect fit 'n finish and only the best for my HK.!. And the folks at Top Gun got them to me fast! I'm a fan and will be back!!

I purchased (4) of these mags for my SP 2022. Like all Mec-Gar mags that I've used, they function as advertised, and feed better than the OEM ags included with the pistol. I'll definitely be buying more.

Top Gun Supply also shipped my order promptly and without any delay, even around the holidays.

Buy with confidence!

I purchased (4) of these mags for my SP 2022. Like all Mec-Gar mags that I've used, they function as advertised, and feed better than the OEM ags included with the pistol. I'll definitely be buying more.

Top Gun Supply also shipped my order promptly and without any delay, even around the holidays.

Buy with confidence!

I purchased (4) of these mags for my SP 2022. Like all Mec-Gar mags that I've used, they function as advertised, and feed better than the OEM ags included with the pistol. I'll definitely be buying more.

Top Gun Supply also shipped my order promptly and without any delay, even around the holidays.

Buy with confidence!

This holster is well designed and very well made. It did require a lot of break in, which is probably a good thing. Galco DRAW-EZ was a big help.