AR-15 TOOLS

AR-15 TOOLS

Products

Pro-Shot AR15 Cleaning Link

Pro-Shot AR15 Cleaning Link

A great accessory for any AR15 owner! The AR cleaning link separates the upper and lower receiver assemblies, locks them solid, and prevents the receiver from constantly flopping closed for easy cleaning. Link uses the original rear pin and pin hole for attachment during use.

ARCL

In stock

$14.95

Wheeler Engineering Delta Series AR Pivot Pin/Roll Pin Install Tool

Wheeler Engineering Delta Series AR Pivot Pin/Roll Pin Install Tool

Wheeler Delta Series AR Pivot Pin Install Tool For the AR-15. Makes pivot spring and detent work fast and effortless. Roll Pin Punch and starter for all lower receiver roll pins. Comes with handy key ring for storage. Black zinc plated steel.

156243

In stock

$6.29

Wheeler Engineering Universal Barrel Clamp

Wheeler Engineering Universal Barrel Clamp

Made from aircraft grade aluminum and bonded with non-marring urethane, the Wheeler Universal Barrel Clamp is able to accommodate three different barrel openings of .85”, .66” and .53” allowing you to change anything from a pencil AR barrel to a bull barrel. When inserted in a vise the urethane coating squeezes down tightly on the barrel to fully secure it for the forces needed for installation/ removal.

672286

In stock

$36.95

Wheeler Engineering Delta Series AR-15 Armorer's Bench Block

Wheeler Engineering Delta Series AR-15 Armorer's Bench Block

The Wheeler Engineering AR-15 Bench Block is ideal for securing your AR during assembly and disassembly. Made of non-marring urethane, it features various notches, grooves, and holes on both sides for the upper receiver, lower receiver, front sight and charging handle. The perfect tool for your next AR-15 build! Ideal for changing or adjusting triggers, removing or installing pins, detents, and springs. Works with ambidextrous safety lower receivers.

156945

In stock

$34.95

Daniel Defense Bolt-Up System Barrel Nut Wrench

Daniel Defense Bolt-Up System Barrel Nut Wrench

The Daniel Defense Bolt-Up Barrel Nut Wrench is a proprietary spanner wrench used to install Daniel Defense AR15 Lite Rail, Omega X, and RIS II Rail System. This wrench is designed to be used with a 1/2 drive torque wrench.

16-002-08234

In stock

$10.95

DPMS Combo Wrench - AR15 Buttstock/1911 Bushing - Steel

DPMS Combo Wrench - AR15 Buttstock/1911 Bushing - Steel

DPMS universal carbine stock spanner wrench loosens the lock ring on AR15 telescoping stocks as well as having a built in 1911 bushing wrench into the handle.

CS-15/45

In stock

$6.95

AR-15 Lower Receiver Vise Block

AR-15 Lower Receiver Vise Block

The Brownells high density urethane vice block inserts into the lower receiver magazine well and locks into place, providing a secure clamping surface. Allows you to safely work on your rifle without the risk of crushing or damaging your lower receiver.

702-004-015

Out of stock

$49.95

Out of stock
Armorer's Punch Set - 14 PIECE

Armorer's Punch Set - 14 PIECE

This 14 piece punch set include two hammers, one nylon and one brass, as well as 12 punches.
  • 8 brass punches from 1/8" to 5/16"
  • 2 Delrin punches - 15/64" and 3/8"
  • 2 steel punches - 3/32" and 7/64"

TL-PHK

Out of stock

$39.95

Out of stock
Daniel Defense 7.62 Lite Rail Barrel Nut Wrench

Daniel Defense 7.62 Lite Rail Barrel Nut Wrench

The Daniel Defense 7.62 Lite Barrel Nut Wrench is a proprietary spanner wrench used to install the Daniel Defense 7.62 Lite Rail system.

16-003-03140-140

Out of stock

$10.95

Out of stock
DPMS AR-15 Multi Tool

DPMS AR-15 Multi Tool

The DPMS Multi-Tool is used for installation and disassembly of Free Float Tubes, Barrel Nuts, Compensators, Barrel Extension Tubes and Carbine Stocks. Provides a 1/2" drive for a socket wrench and has a screw driver tip for the buttstock screw. Powder coated steel.

TL-MW

Out of stock

$33.95

Out of stock

AR-15 Tools

Though working on an AR-15 may be a fairly simplified gunsmithing task, assembling and customizing requires some basic AR-15 tools. A vice block gives you the ability to work on your AR-15 without concerns over damaging the lower receiver. The vice block is inserted into the lower receiver magazine well and locks into place to serve as a stable clamping surface. An upper receiver action block securely positions and shields a standard A2 or flat top upper receiver for barrel installation and removal. Blocks are valuable tools for AR-15 gunsmithing. You also can complete a number of tasks with one multipurpose tool for the AR15. Our multi-tool assists with the installation and disassembly of free float tubes, barrel nuts, compensators, and carbine stocks. Whenever you assemble the AR-15, you can make it exactly the way you want it. Or you can upgrade your existing rifle with add-ons. So keep AR-15 tools in your work area that are made for specific tasks.

Build and Upgrade with Useful Tools for the AR-15 Gun

Before you can even consider working on or modifying your rifle, you’ve got to have tools for the AR-15 gun at your side. Whether you’re an expert gunsmith or just a gun owner who’s good with your hands, you’ll want to see our individual tools, kits and sets. An armorer’s punch set contains hammers and various punches, while a universal sight tool can be essential in installing, removing or adjusting gun sights. When working on your rifle, organize your AR 15 parts and tools to ensure you have everything you need. Be ready with the right tools for the AR-15 gun and a packed repair kit. Once you’ve got the tools covered, get busy!