CLEANING RODS

CLEANING RODS

Shop by:

Caliber
Category

Products

Pro-Shot AR15 Bore Guide - 6.8mm

Pro-Shot AR15 Bore Guide - 6.8mm

Pro-Shot AR Bore Guide allows you to clean your AR-15 from the breech to prevent muzzle or chamber damage. Takes the place of the bolt carrier and self centers in the receiver for safe and easy cleaning. O-ring seal at breech and solvent port keeps chemicals out of the action.

BGAR68

In stock

$16.25

Pro-Shot Coated Rifle Rod 30" .17-.20 cal

Pro-Shot Coated Rifle Rod 30" .17-.20 cal

Pro-Shot coated cleaining rods are covered in a very tough Acetate coating to withstand extended use. One advantage of this coating is that a uniform diameter is maintained throughout the entire rod as compared to other spray on coatings which are inconsistent. Pro-Shot direct design allows all accessories to screw directly onto the rods, eliminating the need for an adapter.

CR30-17

In stock

$41.95

Pro-Shot Brush/Patch Holder Adaptor - .27cal & Up

Pro-Shot Brush/Patch Holder Adaptor - .27cal & Up

Designed to make a smooth transition for the .27cal & up diameter rods to accept smaller diameter accessories, such as a bore brush or patch holder.

*Not a thread adaptor

*Included with all Pro-Shot 27/u Rods.

AD2

In stock

$2.99

Pro-Shot Micro-Polished Cleaning Rod 8" .32 cal & up

Pro-Shot Micro-Polished Cleaning Rod 8" .32 cal & up

The Pro-Shot Micro-Polished Cleaning Rods are made from spec stainless steel with a proprietary jeweled finish. Due to added steps in the manufacturing process, the Pro-Shot rod is more dense and harder than other rods. The polished finish ensures that these rods do not pick up any foreign substances that may be abrasive to the bore.

1ps-8-27_u

In stock

$19.49

Pro-Shot Muzzle Guard .27cal & Up

Pro-Shot Muzzle Guard .27cal & Up

Quality brass made Pro-Shot muzzle guard protects your firearm while cleaning from the muzzle. Not for coated rods, use only with stainless steel micro-polished rods. Fits .27 caliber & up cleaning rods.

MG2

In stock

$3.99

Pro-Shot Muzzle Guard .22-.26cal

Pro-Shot Muzzle Guard .22-.26cal

Quality brass made Pro-Shot muzzle guard protects your firearm while cleaning from the muzzle. Not for coated rods, use only with stainless steel micro-polished rods. Fits .22 - .26 caliber cleaning rods.

MG1

In stock

$3.99

Pro-Shot 2-Piece Shotgun Cleaning Rod 36" 410 - 10 ga w/patch holder

Pro-Shot 2-Piece Shotgun Cleaning Rod 36" 410 - 10 ga w/patch holder

The Pro-Shot Micro-Polished Cleaning Rods are made from spec stainless steel with a proprietary jeweled finish. Due to added steps in the manufacturing process, the Pro-Shot rod is more dense and harder than other rods. The polished finish ensures that these rods do not pick up any foreign substances that may be abrasive to the bore.

2ps-36-10_410

In stock

$31.95

Pro-Shot Micro-Polished Cleaning Rod 26" .22-.26 cal

Pro-Shot Micro-Polished Cleaning Rod 26" .22-.26 cal

The Pro-Shot Micro-Polished Cleaning Rods are made from spec stainless steel with a proprietary jeweled finish. Due to added steps in the manufacturing process, the Pro-Shot rod is more dense and harder than other rods. The polished finish ensures that these rods do not pick up any foreign substances that may be abrasive to the bore.

1ps-26-22_26

In stock

$26.95

Pro-Shot Shotgun Adaptor - Rifle to Shotgun

Pro-Shot Shotgun Adaptor - Rifle to Shotgun

Adapts # 8/32 (Rifle) thread to accept #5/16-27 threaded shotgun brushes, jags, patch holders.

AD1

In stock

$3.39

Pro-Shot Micro-Polished Cleaning Rod 8" .22 cal

Pro-Shot Micro-Polished Cleaning Rod 8" .22 cal

The Pro-Shot Micro-Polished Cleaning Rods are made from spec stainless steel with a proprietary jeweled finish. Due to added steps in the manufacturing process, the Pro-Shot rod is more dense and harder than other rods. The polished finish ensures that these rods do not pick up any foreign substances that may be abrasive to the bore.

1ps-8-22_u

In stock

$19.49

Pro-Shot Micro-Polished Cleaning Rod 12" .17 cal w/jag

Pro-Shot Micro-Polished Cleaning Rod 12" .17 cal w/jag

The Pro-Shot Micro-Polished Cleaning Rods are made from spec stainless steel with a proprietary jeweled finish. Due to added steps in the manufacturing process, the Pro-Shot rod is more dense and harder than other rods. The polished finish ensures that these rods do not pick up any foreign substances that may be abrasive to the bore.

1PS-12-17

In stock

$27.95

Pro-Shot Micro-Polished Cleaning Rod 12" .27 cal & up

Pro-Shot Micro-Polished Cleaning Rod 12" .27 cal & up

The Pro-Shot Micro-Polished Cleaning Rods are made from spec stainless steel with a proprietary jeweled finish. Due to added steps in the manufacturing process, the Pro-Shot rod is more dense and harder than other rods. The polished finish ensures that these rods do not pick up any foreign substances that may be abrasive to the bore.

1ps-12-27_u

In stock

$20.49

Pro-Shot Rod Stop .22-.26cal

Pro-Shot Rod Stop .22-.26cal

The Pro-Shot Rod Stop is designed to prevent the over insertion of the cleaning rod to prevent damage to the firing pin. User adjustable to make cleaning easy and fast! Designed for Pro-Shot stainless micro-polished .22 to .26 caliber cleaning rods.

ST1

In stock

$6.25

Pro-Shot Micro-Polished Cleaning Rod 12" .22 cal

Pro-Shot Micro-Polished Cleaning Rod 12" .22 cal

The Pro-Shot Micro-Polished Cleaning Rods are made from spec stainless steel with a proprietary jeweled finish. Due to added steps in the manufacturing process, the Pro-Shot rod is more dense and harder than other rods. The polished finish ensures that these rods do not pick up any foreign substances that may be abrasive to the bore.

1ps-12-22_u

Out of stock

$20.49

Out of stock
Pro-Shot Micro-Polished Cleaning Rod 18" .22 cal

Pro-Shot Micro-Polished Cleaning Rod 18" .22 cal

The Pro-Shot Micro-Polished Cleaning Rods are made from spec stainless steel with a proprietary jeweled finish. Due to added steps in the manufacturing process, the Pro-Shot rod is more dense and harder than other rods. The polished finish ensures that these rods do not pick up any foreign substances that may be abrasive to the bore.

1ps-18-22_u

Out of stock

$23.49

Out of stock
Pro-Shot Micro-Polished Cleaning Rod 26" .27 cal & up

Pro-Shot Micro-Polished Cleaning Rod 26" .27 cal & up

The Pro-Shot Micro-Polished Cleaning Rods are made from spec stainless steel with a proprietary jeweled finish. Due to added steps in the manufacturing process, the Pro-Shot rod is more dense and harder than other rods. The polished finish ensures that these rods do not pick up any foreign substances that may be abrasive to the bore.

1ps-26-27_u

Out of stock

$26.95

Out of stock
Pro-Shot Rod Stop .27cal & Up

Pro-Shot Rod Stop .27cal & Up

The Pro-Shot Rod Stop is designed to prevent the over insertion of the cleaning rod to prevent damage to the firing pin. User adjustable to make cleaning easy and fast! Designed for Pro-Shot stainless micro-polished .27 caliber & up cleaning rods.

ST2

Out of stock

$6.25

Out of stock

Gun Cleaning Rods

We make maintenance faster and easier with the latest gun cleaning rods. You’ll want to check out our rods that feature a special, polished finish which helps to protect the bore from abrasives. They’re reliable partners in both cleaning and lubricating so you can experience smoother functioning and dependable accuracy. Use the top handgun cleaning rods for your firearm to remove unwanted residues. You’ll be able to prepare your gun for extreme conditions or long term storage with the right tools at your side. Our stainless steel pistol cleaning rods are ultra strong so they work hard to pick up fouling and apply oils evenly. They are essentials for barrel care. Attach a bore brush to a well made rod to get rid of material deposits that affect operations. The cleaning rod can also be used with a cloth or another accessory as you apply solvents and gun lubricants. We’re here to help you lengthen the life of your firearm with products from trusted leaders in gun care.