Sig Sauer P226 Gun Parts
Shop by:
- Category -> Sig Sauer P220 Gun Parts
Products
Sig Sauer Mainspring - P220/226/229 DAK - RED
Sig Sauer factory Mainspring (Hammer Spring) for all caliber P220, P226, and P229 DAK models. |
MAINSPRING-3
In stock
$12.95
Sig Sauer Take Down Lever - P227/P220/225/226/228/229/245 Blue
Sig Sauer factory Take Down Lever for P227, P220, P225, P226, P228, P229, P239 and P245 models. Part number changed from 34229065. |
LEVER-6
In stock
$26.95
Sig Sauer Factory Recoil Spring - 2 Step and .22LR Conversion Kits
Sig Sauer factory replacement recoil spring for the .22LR conversion kits and the 2 Step P series guns with the .22LR slide assembly. |
1200380
In stock
$14.95
Grayguns Fat Guide Rod - Sig P220/P226 - Stainless
Developed by the renowned gunsmiths of Grayguns, the FAT guide rods are designed to optimally support factory Sig Sauer, and Grayguns custom multi-strand springs for maximum service life and smooth, reliable function. Designed to the maximum nominal diameter to fit each pistol perfectly, FAT rods also eliminate the possibility of coil-jumping and damage when used with correctly-selected after-market single strand recoil springs. Grayguns FAT rods are hardened and stress-relieved to withstand a lifetime of hard use as well as being carefully polished stainless or finished in ultra-durable Super Black. Lifetime guarantee against galling, ringing or breakage. Simply put, some of the highest quality guide rods available today. Fits Sig Sauer P220 and P226 - Stainless |
GRD-SIG-22F-SS
In stock
$20.00
Wolff Hammer Spring - SIG P220/225/226/228/229
P220 above Serial # 219166
Sig P225, P226, P228 and P229
|
285 - 17lbs
In stock
$3.99
Grayguns Fat Guide Rod - Sig P220/P226 - Super Black
Developed by the renowned gunsmiths of Grayguns, the FAT guide rods are designed to optimally support factory Sig Sauer, and Grayguns custom multi-strand springs for maximum service life and smooth, reliable function. Designed to the maximum nominal diameter to fit each pistol perfectly, FAT rods also eliminate the possibility of coil-jumping and damage when used with correctly-selected after-market single strand recoil springs. Grayguns FAT rods are hardened and stress-relieved to withstand a lifetime of hard use as well as being carefully polished stainless or finished in ultra-durable Super Black. Lifetime guarantee against galling, ringing or breakage. Simply put, some of the highest quality guide rods available today. Fits Sig Sauer P220 and P226 - Super Black Finish |
GRD-SIG-22F-SB
In stock
$25.00
Sig Sauer Extractor - P Series New Style External, Long
Sig Sauer factory made external extractor for new style P220, P226, P227, P229, P239 and P224 with the long external extractor. |
1201010
In stock
$32.95
Grayguns Dual Adjustable Straight Trigger - Sig Sauer P-Series - STEEL BLACK
The SIG P-Series Dual Adjustable Straight Trigger is the straight-faced version of our legendary curved P-Series Dual Adjustable Trigger. This trigger includes over travel and pre-travel adjustability. (Adjustable for double action slack and single action over travel.) The optimized trigger face pressure-wall angle provides for outstanding single action sear release and positive, ultra-fast reset control. The ergonomics provides superior double action leverage and control. Dual Adjustable Straight Trigger DetailsThis trigger is machined from tough steel. The trigger is carefully heat treated and finished in black oxide. Tight pin hole tolerances assure smooth, solid function. Guaranteed for life against defects in materials or workmanship. Made with love, supplied with a hex key. The trigger weight is about .83 ounces (23.45 grams) Fit GuideThe trigger is designed to fit both current and older model traditional double action (DA/SA/decocker) P-Series pistols, including
These triggers are approximately 10mm wide. At this time, we are not suggesting this trigger for guns equipped with the DAK trigger system. This trigger may not be fully compatible with California compliant or similar P-series pistol models equipped with a magazine disconnector, and Grayguns urges caution. We do not recommend deactivating any mechanical safety device. The Grayguns DA/SA triggers will not fit SIG Pro, P225 / P6, P239, West German P220s, or most SAO models. Most of these triggers are a narrower 8mm width Intended to be installed by a qualified Sig Sauer armorer or gunsmith |
TRG-SIG-22X-DAS
In stock
$74.00
Sig Sauer Firing Pin Positioning Pin - Current P Series - SPIRAL
Sig Sauer factory Firing Pin Retaining Pin for P227, P220, P226, P229, P229. P224 and P239 stainless steel slide models. This is the spiral or coiled pin found on later model pistols. Not for use on older pistols or those that use the solid FPPP or the 2 piece roll pins. For slides with short extractors only. |
PIN-12
In stock
$10.99
Sig Sauer Sear Spring Seat Pin - P Series
Sig Sauer factory Sear Spring Seat Pin for P Series pistols. |
1201708
In stock
$7.99
Grayguns Dual Adjustable Curved Trigger - Sig Sauer P-Series - STEEL BLACK
The Grayguns P-Series Dual Adjustable Curved Trigger is the ultimate trigger upgrade for your Legion Series or any modern DA/SA SIG P-Series pistol. Bruce Gray has combined the adjustable over-travel feature, unbeatable comfort and control and unrivaled quality of our original OEM SIG Sauer® Legion P22xCT, Classic Standard trigger, with the improved geometry and pre-travel adjustment of our wildly popular P22xST Dual Adjustable Straight Trigger series. This trigger is the ultimate upgrade for your Legion Series or any modern DA/SA SIG P-Series pistol. Our Dual Adjustable Curved TriggerThis steel trigger is carefully heat treated and finished in black oxide. Tight pin hole tolerances assure smooth, solid function. The trigger is guaranteed for life against defects in materials or workmanship. Made with love, supplied with a hex key. Fit GuideThe Dual Adjustable Curved Trigger is designed to fit both current and older model traditional double action (DA/SA/decocker) P-Series pistols, including:
These triggers are approximately 10mm wide. At this time, we are not suggesting this trigger for guns equipped with the DAK trigger system. This trigger may not be fully compatible with California compliant or similar P-Series pistol models equipped with a magazine disconnector, and Grayguns urges caution. We do not recommend deactivating any mechanical safety device. The Grayguns DA/SA triggers will not fit SIG Pro, P225 / P6, P239, West German P220s, or most SAO models. Most of these triggers are a narrower 8mm width. |
TRG-SIG-22X-DAC
In stock
$74.00
Sig Sauer Sear Spring Pin - Fits All
Sig Sauer factory sear spring pin for all classic P series models. |
34260710
In stock
$6.95
Grayguns Master Spring Set - Sig Sauer P-Series - NOT P225/P6
From Grayguns, a Master Spring Set for Sig Sauer P-Series handguns. The P-MSS kit is an action upgrade package designed to reduce trigger pull weight while still providing reliable primer strikes. This set includes two mainsprings, one 17 lb. and one 19 lb., and a competition sear spring. Fits the modern P-Series handguns with a DA/SA system, P220, P224, P225A1, P226, P227, P228, P229 and P-226 X-Five Allround. |
SYS-SIG-22X-MSS
In stock
$16.00
SIG SAUER Factory Guide Rod - BLACK - P220/226
SIG factory carbon steel Recoil Spring Guide Rod for P220 and P226 models. |
GUIDE-1
In stock
$24.95
Sig Sauer Support Plate - P220, P225, P226, P228, P229
Sig Sauer factory Support Plate for all standard P series models except P239. |
PLATE-1
In stock
$19.99
Sig Sauer Hammer Strut - P220/226/229 DAK
Sig Sauer factory Hammer Strut for P220, P226, and P229 DAK models. |
HAMMER-STRUT-1
In stock
$19.99
Grayguns P320 Adjustable Hybrid Trigger - TIN Gold
Bruce Gray combined the best of both worlds when he designed what we know as the hybrid trigger. The unique face allows the shooter can take advantage of finger placement lower on the face, with the comfort of a traditional curved face. This hybrid design reduces trigger weight while preserving all mechanical safety values. The Grayguns P320 Hybrid Trigger uses internal leverage changes to yield superior trigger pull, while supporting the voluntary upgrade’s enhanced reliability and rough handling performance qualities. Includes our adjustable over-travel stop design to shorten reset and take out all gross over-travel. Designed for easy drop-in installation. Specifically designed for P320s with current fire control unit components, or those who have gone through SIG’s Voluntary Upgrade Program. Designed for demanding duty use, with the toughness to outlast your pistol, our P320 triggers are guaranteed for life.
Titanium Nitride (TiN) A well-proven standard layer type through its balanced properties. The golden titanium nitride layer, abbreviated TiN, indicates the following properties:
Fits all variations within the P320 (upgraded) system. Including all sizes, TACOPS Carry, X-VTAC, X-Carry, X-Five and RX versions. DisclaimerThese parts are intended for installation by a qualified armourer or gunsmith. In some cases professional fitting will be required by a trained, qualified armorer/gunsmith who is very familiar with the pistol’s action. This is due to the varying tolerances present in all mass-produced firearms. Although kits fit with no issues in a great majority of pistols, Grayguns is unable to guarantee perfect functionality in every instance. Grayguns does offer installation services for all parts kits we offer. |
TRG-SIG-320-AHT-TIN
In stock
$99.00
Sig Sauer Safety Lock - SIGPRO/P227/P220/226/229-9/239/ SS
Sig Sauer factory Safety Lock for P227, P220, P226, P229 9mm, SP2009 9mm, SP2340 .40/357 and P239 models with stainless steel slides. Not for use with carbon steel stamped slide versions. |
1202582
In stock
$29.95