Sig Sauer P220 Gun Parts
Shop by:
- Category -> Sig Sauer P220 Gun Parts
Products
Sig Sauer Mainspring - P220/226/229 DAK - RED
Sig Sauer factory Mainspring (Hammer Spring) for all caliber P220, P226, and P229 DAK models. |
MAINSPRING-3
In stock
$12.95
Sig Sauer Take Down Lever - P227/P220/225/226/228/229/245 Blue
Sig Sauer factory Take Down Lever for P227, P220, P225, P226, P228, P229, P239 and P245 models. Part number changed from 34229065. |
LEVER-6
In stock
$26.95
Sig Sauer Factory Recoil Spring - 2 Step and .22LR Conversion Kits
Sig Sauer factory replacement recoil spring for the .22LR conversion kits and the 2 Step P series guns with the .22LR slide assembly. |
1200380
In stock
$14.95
Sig Sauer Slide Catch Lever - P220
Sig Sauer factory Slide Catch Lever for P220 models. |
Lever-16
In stock
$39.95
Grayguns Fat Guide Rod - Sig P220/P226 - Stainless
Developed by the renowned gunsmiths of Grayguns, the FAT guide rods are designed to optimally support factory Sig Sauer, and Grayguns custom multi-strand springs for maximum service life and smooth, reliable function. Designed to the maximum nominal diameter to fit each pistol perfectly, FAT rods also eliminate the possibility of coil-jumping and damage when used with correctly-selected after-market single strand recoil springs. Grayguns FAT rods are hardened and stress-relieved to withstand a lifetime of hard use as well as being carefully polished stainless or finished in ultra-durable Super Black. Lifetime guarantee against galling, ringing or breakage. Simply put, some of the highest quality guide rods available today. Fits Sig Sauer P220 and P226 - Stainless |
GRD-SIG-22F-SS
In stock
$20.00
Wolff Hammer Spring - SIG P220/225/226/228/229
P220 above Serial # 219166
Sig P225, P226, P228 and P229
|
285 - 17lbs
In stock
$3.99
Grayguns Fat Guide Rod - Sig P220/P226 - Super Black
Developed by the renowned gunsmiths of Grayguns, the FAT guide rods are designed to optimally support factory Sig Sauer, and Grayguns custom multi-strand springs for maximum service life and smooth, reliable function. Designed to the maximum nominal diameter to fit each pistol perfectly, FAT rods also eliminate the possibility of coil-jumping and damage when used with correctly-selected after-market single strand recoil springs. Grayguns FAT rods are hardened and stress-relieved to withstand a lifetime of hard use as well as being carefully polished stainless or finished in ultra-durable Super Black. Lifetime guarantee against galling, ringing or breakage. Simply put, some of the highest quality guide rods available today. Fits Sig Sauer P220 and P226 - Super Black Finish |
GRD-SIG-22F-SB
In stock
$25.00
Sig Sauer Extractor - P Series New Style External, Long
Sig Sauer factory made external extractor for new style P220, P226, P227, P229, P239 and P224 with the long external extractor. |
1201010
In stock
$32.95
Grayguns Dual Adjustable Straight Trigger - Sig Sauer P-Series - STEEL BLACK
The SIG P-Series Dual Adjustable Straight Trigger is the straight-faced version of our legendary curved P-Series Dual Adjustable Trigger. This trigger includes over travel and pre-travel adjustability. (Adjustable for double action slack and single action over travel.) The optimized trigger face pressure-wall angle provides for outstanding single action sear release and positive, ultra-fast reset control. The ergonomics provides superior double action leverage and control. Dual Adjustable Straight Trigger DetailsThis trigger is machined from tough steel. The trigger is carefully heat treated and finished in black oxide. Tight pin hole tolerances assure smooth, solid function. Guaranteed for life against defects in materials or workmanship. Made with love, supplied with a hex key. The trigger weight is about .83 ounces (23.45 grams) Fit GuideThe trigger is designed to fit both current and older model traditional double action (DA/SA/decocker) P-Series pistols, including
These triggers are approximately 10mm wide. At this time, we are not suggesting this trigger for guns equipped with the DAK trigger system. This trigger may not be fully compatible with California compliant or similar P-series pistol models equipped with a magazine disconnector, and Grayguns urges caution. We do not recommend deactivating any mechanical safety device. The Grayguns DA/SA triggers will not fit SIG Pro, P225 / P6, P239, West German P220s, or most SAO models. Most of these triggers are a narrower 8mm width Intended to be installed by a qualified Sig Sauer armorer or gunsmith |
TRG-SIG-22X-DAS
In stock
$74.00
Sig Sauer Mainspring - P239 DAK, P220
Sig Sauer factory Mainspring (Hammer Spring) for all caliber P239 DAK models and P220 (old style) DA/SA. |
34225680
In stock
$9.95
Sig Sauer P220 COMPACT Grips, Black Polymer
Factory replacement grip panels for your Sig P220 COMPACT. |
1200194
In stock
$39.95
Sig Sauer Firing Pin Positioning Pin - Current P Series - SPIRAL
Sig Sauer factory Firing Pin Retaining Pin for P227, P220, P226, P229, P229. P224 and P239 stainless steel slide models. This is the spiral or coiled pin found on later model pistols. Not for use on older pistols or those that use the solid FPPP or the 2 piece roll pins. For slides with short extractors only. |
PIN-12
In stock
$10.99
Sig Sauer Locking Insert - P220 Carbon Steel, P227 Compact/Carry
Sig Sauer factory Locking Insert for P220 carbon steel slide models, 4 dot. Also fits P227R3 models. |
34221660
In stock
$159.95
Sig Sauer Sear Spring Seat Pin - P Series
Sig Sauer factory Sear Spring Seat Pin for P Series pistols. |
1201708
In stock
$7.99
Grayguns Dual Adjustable Curved Trigger - Sig Sauer P-Series - STEEL BLACK
The Grayguns P-Series Dual Adjustable Curved Trigger is the ultimate trigger upgrade for your Legion Series or any modern DA/SA SIG P-Series pistol. Bruce Gray has combined the adjustable over-travel feature, unbeatable comfort and control and unrivaled quality of our original OEM SIG Sauer® Legion P22xCT, Classic Standard trigger, with the improved geometry and pre-travel adjustment of our wildly popular P22xST Dual Adjustable Straight Trigger series. This trigger is the ultimate upgrade for your Legion Series or any modern DA/SA SIG P-Series pistol. Our Dual Adjustable Curved TriggerThis steel trigger is carefully heat treated and finished in black oxide. Tight pin hole tolerances assure smooth, solid function. The trigger is guaranteed for life against defects in materials or workmanship. Made with love, supplied with a hex key. Fit GuideThe Dual Adjustable Curved Trigger is designed to fit both current and older model traditional double action (DA/SA/decocker) P-Series pistols, including:
These triggers are approximately 10mm wide. At this time, we are not suggesting this trigger for guns equipped with the DAK trigger system. This trigger may not be fully compatible with California compliant or similar P-Series pistol models equipped with a magazine disconnector, and Grayguns urges caution. We do not recommend deactivating any mechanical safety device. The Grayguns DA/SA triggers will not fit SIG Pro, P225 / P6, P239, West German P220s, or most SAO models. Most of these triggers are a narrower 8mm width. |
TRG-SIG-22X-DAC
In stock
$74.00
SIG P220 .45 PARTS KIT
Kit Contains:
|
220-45-PKIT
In stock
$48.95
Sig Sauer Sear Spring Pin - Fits All
Sig Sauer factory sear spring pin for all classic P series models. |
34260710
In stock
$6.95
Sig Sauer Slide Catch Lever - P220, P245 NICKEL
Sig Sauer factory Nickel Slide Catch Lever for P220 and P245 models. |
1200285
In stock
$21.99
Sig Sauer P220
Our huge selection of Sig Sauer P220 gun parts, tools and accessories are ready to meet your duty, defense and sport shooting needs. Sig Sauer branded parts from the factory. Purchase the genuine product from us and know you are getting the real deal. Keep your P220 running at its best with replacement gun parts from Top Gun Supply.