Aero Precision lowers are precision machined to mil-spec dimensions, and work with standard AR15 components to ensure the highest quality with a correct component interface.

Gen 2 Features

• Upper Tension Screw - Allows users to fine tune the fit of the upper and lower receiver through the use of a nylon tipped tensioning set screw inserted in the grip tang of the lower receiver. This provides a tight fit with any standard AR15 upper receiver.
• Increased Magwell Flare - Allows for easier insertion of magazines and provides a sleeker look.

Aero Precision lowers are precision machined to mil-spec dimensions, and work with standard AR15 components to ensure the highest quality with a correct component interface. FDE Cerakote Finish.

Gen 2 Features

• Upper Tension Screw - Allows users to fine tune the fit of the upper and lower receiver through the use of a nylon tipped tensioning set screw inserted in the grip tang of the lower receiver. This provides a tight fit with any standard AR15 upper receiver.
• Increased Magwell Flare - Allows for easier insertion of magazines and provides a sleeker look.

Aero Precsion AR15 Stripped Lower Receiver is the perfect base for your custom AR15 build. Machined to mil-spec dimensions, their lowers work with standard AR15 components and ensure the highest quality with a correct component interface.

Includes:

• Stripped AR15 Gen 2 Lower Receiver in OD Cerakote H-232Q
• Nylon tipped tensioning screw
• Billet Trigger Guard - OD Green

Includes:

• M5 (.308) Lower Receiver
• A2 Grip
• M4 Stock
• Mil-Spec Lower Parts Kit
• 308 Carbine Buffer and Spring
• These parts are installed

Our M5 .308 Stripped Lower Receiver helps you build a big-bore AR from the ground up. Mil-spec dimensions and coating ensure the highest quality and correct component interface. DPMS cut.

Features:

• Works with standard AR 308 components and magazines
• Upper Tension Screw - Allows users to fine tune the fit of the upper and lower receiver through the use of a nylon tipped tensioning set screw inserted in the grip tang of the lower receiver.
• Rear takedown pin detent hole is threaded for a 4-40 set screw
• Bolt catch is threaded for a screw pin (no roll pin needed)
• Integrated trigger guard
• Selector markings will work with 45, 60 or 90 degree safety selectors
• Accepts Battle Arms Development short throw safety selectors, but will work with any standard selector
• No gap with aftermarket pistol grips

Includes:

• Stripped M5 (.308) Lower Receiver in Anodized Black
• Nylon tipped tensioning set screw

The Aero Precision M4E1 Lower Receiver delivers billet aesthetics in a forged package. This custom designed enhanced forging is machined from 7075-T6 Aluminum and compatible with all mil-spec AR15 parts. Aside from the visual upgrades this custom engineered design provides that challenge much more expensive billet options, we have added several functional features to the lower receiver to simplify the assembly process for the at home builder.

M4E1 Lower Receiver Improvements:

• Threaded Bolt Catch Roll Pin - Allows for simple installation of the bolt catch and virtually eliminates the chance to damage the finish during installation (pin included). 1/16" Hex Key required for assembly.
• Integrated Trigger Guard - Eliminates the possibility of breaking the trigger guard tabs by integrating the trigger guard into the lower, creating a stronger more rigid platform to build upon.
• Upper Tension Screw - Allows users to fine tune the fit of the upper and lower receiver using a nylon tipped tensioning set screw inserted in the grip tang of the lower receiver. This provides a tight fit with any standard AR15 upper receiver.
• Threaded Takedown Pin Detent Recess - Allows user to easily install the Takedown Pin detent and spring with the use of a 4-40 set screw (no more launching detents across the room).
• Increased Magwell Flare - Increased the flare of the magwell to aid in quick and efficient magazine changes.
• Marked and milled to accept short-throw safety selectors, but will work with standard selectors as well.

Includes:

• Stripped M4E1 Lower Receiver
• Nylon tipped tensioning set screw
• Threaded Bolt Catch Pin

Timber Creek Outdoors complete AR15 build kit includes:

Oversized Ambi Charging Handle

15" Ultra Light Hand Guard - MLOK

Forward Assist

Billet Dust Cover

Enforcer AR Pistol Grip

Oversized Trigger Guard

Ambi Safety

Extended Magazine Release

Take Down Pins

QD End Plate

Buffer Tube

Low Profile .750 Gas Block

.223 Heat Breaker

Includes:

• AR15 Gen 2 Lower Receiver - Anodized Black
• M4 Stock - Black
• A2 Grip - Black
• Mil-spec Lower Parts Kit
• Carbine Receiver extension
• AR15 Carbine Buffer and Spring
• These parts are installed

Factory BLEMs.

The Aero Precision M4E1 Lower Receiver delivers billet aesthetics in a forged package. This custom designed enhanced forging is machined from 7075-T6 Aluminum and compatible with all mil-spec AR15 parts. Aside from the visual upgrades this custom engineered design provides that challenge much more expensive billet options, we have added several functional features to the lower receiver to simplify the assembly process for the at home builder.

M4E1 Lower Receiver Improvements:

• Threaded Bolt Catch Roll Pin - Allows for simple installation of the bolt catch and virtually eliminates the chance to damage the finish during installation (pin included). 1/16" Hex Key required for assembly.
• Integrated Trigger Guard - Eliminates the possibility of breaking the trigger guard tabs by integrating the trigger guard into the lower, creating a stronger more rigid platform to build upon.
• Upper Tension Screw - Allows users to fine tune the fit of the upper and lower receiver using a nylon tipped tensioning set screw inserted in the grip tang of the lower receiver. This provides a tight fit with any standard AR15 upper receiver.
• Threaded Takedown Pin Detent Recess - Allows user to easily install the Takedown Pin detent and spring with the use of a 4-40 set screw (no more launching detents across the room).
• Increased Magwell Flare - Increased the flare of the magwell to aid in quick and efficient magazine changes.
• Marked and milled to accept short-throw safety selectors, but will work with standard selectors as well.

Includes:

• Stripped M4E1 Lower Receiver
• Nylon tipped tensioning set screw
• Threaded Bolt Catch Pin

The Aero Precision M4E1 Lower Receiver delivers billet aesthetics in a forged package. This custom designed enhanced forging is machined from 7075-T6 Aluminum and compatible with all mil-spec AR15 parts. Aside from the visual upgrades this custom engineered design provides that challenge much more expensive billet options, we have added several functional features to the lower receiver to simplify the assembly process for the at home builder.

M4E1 Lower Receiver Improvements:

• Threaded Bolt Catch Roll Pin - Allows for simple installation of the bolt catch and virtually eliminates the chance to damage the finish during installation (pin included). 1/16" Hex Key required for assembly.
• Integrated Trigger Guard - Eliminates the possibility of breaking the trigger guard tabs by integrating the trigger guard into the lower, creating a stronger more rigid platform to build upon.
• Upper Tension Screw - Allows users to fine tune the fit of the upper and lower receiver using a nylon tipped tensioning set screw inserted in the grip tang of the lower receiver. This provides a tight fit with any standard AR15 upper receiver.
• Threaded Takedown Pin Detent Recess - Allows user to easily install the Takedown Pin detent and spring with the use of a 4-40 set screw (no more launching detents across the room).
• Increased Magwell Flare - Increased the flare of the magwell to aid in quick and efficient magazine changes.
• Marked and milled to accept short-throw safety selectors, but will work with standard selectors as well.

Includes:

• Stripped M4E1 Lower Receiver
• Nylon tipped tensioning set screw
• Threaded Bolt Catch Pin

Must ship to a U.S. FFL dealer

Our Ambidextrous Lower Receiver is designed to give you full control from either side, resulting in a versatile firearm for any shooter. Whether you are right or left handed, we've got you covered. Complete this receiver with a Norgon Ambi Catch and a Ambidextrous Safety Selector for full bolt, magazine and safety control from either side. Machined to mil-spec dimensions.

PDQ Ambi-Bolt Release Features:

• Material: Military grade steel
• Coating: Matte black hard-coat anodized Mil 8625 Type 3 Class 2
• Allows user to lock the bolt back as well as send the bolt forward
• Made in the USA

AR15 Gen 2 Stripped Lower Receiver is the perfect base for your custom AR15 build. Machined to mil-spec dimensions, our lowers work with standard AR15 components and ensure the highest quality with a correct component interface.

Gen 2 Improvements

• Upper Tension Screw - Allows users to fine tune the fit of the upper and lower receiver through the use of a nylon tipped tensioning set screw inserted in the grip tang of the lower receiver. This provides a tight fit with any standard AR15 upper receiver.
• Increased Magwell Flare - Allows for easier insertion of magazines and provides a sleeker look.

Includes:

• Stripped AR15 Lower Receiver, Gen 2
• Nylon tipped tensioning set screw

This product is blemished. Blemishes may include:

• Plating inconsistencies
• Pits
• Scratches
• Dents
• Flaws in finish

Aero blemished products are fully functional, they just didn't meet their high standards. They are a great product at a discounted price for someone who doesn't mind a slight imperfection.

Upper Receiver Features:

• Machined from 7075-T6 forged aluminum
• M4 Feedramps
• .250” takedown pin holes
• Works with standard AR15 components

Lower Receiver Features:

• Machined from 7075-T6 forged aluminum
• Upper Tension Screw
• Flared Magwell
• Rear takedown pin detent hole is threaded for a 4-40 set screw
• Works with standard AR15 components and magazines