ARMORER HAND TOOLS

ARMORER HAND TOOLS

Shop by:

Category
Your results are being filtered by:
  • Manufacturer -> Wheeler Engineering
Remove Filters

Products

Wheeler Engineering Delta Series AR Pivot Pin/Roll Pin Install Tool

Wheeler Engineering Delta Series AR Pivot Pin/Roll Pin Install Tool

Wheeler Delta Series AR Pivot Pin Install Tool For the AR-15. Makes pivot spring and detent work fast and effortless. Roll Pin Punch and starter for all lower receiver roll pins. Comes with handy key ring for storage. Black zinc plated steel.

156243

In stock

$8.99

Wheeler Engineering Nylon/Brass Hammer

Wheeler Engineering Nylon/Brass Hammer

Features both a 1" brass face for driving pins and punches and a non-marring 1" nylon face that is great for pin alignment and other uses where a steel hammer is not appropriate. 11" overall length.

711016

In stock

$16.99

Wheeler Engineering 89-Piece Professional Gunsmith Screwdriver Set

Wheeler Engineering 89-Piece Professional Gunsmith Screwdriver Set

The Wheeler Engineering 89 piece professional gunsmith screwdriver set covers all the bases when it comes to working on firearms. All bits are made from S2 tool steel and hardened to 56-58 Rockwell “C.”

Kit Includes:

  1. 54 Hollow-ground Flat Bits
  2. 15 Specialty Gunsmith Bits
  3. 8 Allen Bits
  4. 4 Phillips Bits
  5. 3 Torx Bits
  6. Square to Hex Adapter
  7. Bit Extension
  8. Regular No-Slip Handle
  9. Short No-Slip Handle
  10. Case w/ Bit Location Guide

562194

In stock

$69.95

Wheeler Engineering Hammer & Punch Set

Wheeler Engineering Hammer & Punch Set

The Wheeler Hammer and Punch Set includes a polymer/brass hammer, eight precision brass punches, four steel punches, and two plastic punches. A great kit for driving pins or drifting sights while and the range or bench.

Kit Includes

  1. Hammer with brass and polymer face
  2. 8 Brass punches: 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 9/32" and 5/16"
  3. 4 Steel punches: 2 each of 1/16" and 3/32"
  4. 2 Composite punches: 15/64" and 3/8"
  5. Molded plastic storage case

951900

In stock

$36.99

Wheeler Engineering Space Saver Screwdriver Set

Wheeler Engineering Space Saver Screwdriver Set

Less than half the size of comparable gunsmithing screwdriver sets!

The Wheeler® Space Saver Gunsmithing Screwdriver Set takes up very little space on your bench, but contains a durable and comprehensive set of 26 bits chosen to meet most of your gunsmithing needs. It’s also the perfect size to include on your trips to the range and the field.

Included with the standard, Phillips, hex, and torx bits, is a 2″ long #2 Phillips bit which is ideal for recoil pad installation, and a hex-to-square conversion bit which allows you to use 1/4″ square drive sockets and other attachments.

The magnetic handle is perfectly sized for gunsmithing needs, allowing you to carry a variety of bits if the need should arise.

664507

In stock

$15.99

Wheeler Engineering Universal Bench Block

Wheeler Engineering Universal Bench Block

Ideal for firearm assembly and disassembly, the Wheeler Universal Bench Block features a variety of notches, grooves, and holes to assist you in installation of various parts and accessories. Made of non-marring urethane. Perfect for use on 1911 pistols as well as other firearms such as 10/22s. Features a main spring removal recess and boss, barrel link removal channel, rear sight drift channel, and front sight staking channel.

672215

In stock

$19.99

Wheeler Engineering Delta Series AR-15 Armorer's Bench Block

Wheeler Engineering Delta Series AR-15 Armorer's Bench Block

The Wheeler Engineering AR-15 Bench Block is ideal for securing your AR during assembly and disassembly. Made of non-marring urethane, it features various notches, grooves, and holes on both sides for the upper receiver, lower receiver, front sight and charging handle. The perfect tool for your next AR-15 build! Ideal for changing or adjusting triggers, removing or installing pins, detents, and springs. Works with ambidextrous safety lower receivers.

156945

In stock

$34.95

Wheeler Engineering Roll Pin Punch Set - 9 Piece

Wheeler Engineering Roll Pin Punch Set - 9 Piece

The Wheeler Engineering® Roll Pin Punch set is machined from hardened steel to prevent bending or breaking while driving any size roll pin. The punches are designed with a hemispherical tip to provide proper alignment of the roll pin to prevent damage to the firearm and the roll pin. The 9 piece set includes: 5/16″, 1/4″, 7/32″, 3/16″, 5/32″, 1/8″, 3/32″, 5/64″, 1/16″ punches in a nylon pouch.

  • 9-piece set 1/16″ through 5/16″
  • Hardened Steel construction
  • Hemispherical Tip
  • Fitted Nylon Storage Pouch

204513

In stock

$26.99

Wheeler Engineering Digital Trigger Gauge

Wheeler Engineering Digital Trigger Gauge

Wheeler’s Professional Digital Trigger Gauge features an over-molded design and soft touch buttons for comfort and a consistent line of pull. Includes bladed trigger adapter to allow use with triggers that have internal safety blades such as: Glock®, Ruger®, Savage®. Also includes a foam lined storage case.

0-12LBS range, arm folds inside housing to protect the load sensor when not in use, features a Max, Min, Average and Live functions.


710904

Out of stock

Out of stock
Wheeler Engineering F.A.T. Wrench w/ 10 Bit Set

Wheeler Engineering F.A.T. Wrench w/ 10 Bit Set

Wheeler’s FAT Wrench® brings perfect consistency to every screw on your rifle!

This amazing handheld torque wrench lets you apply repeatable, accurate torque settings to scope rings, guard screws and other screws, which aids in accuracy and decreases the opportunity for problems in the field.

The FAT Wrench® is a perfect compliment to the Deluxe Gunsmithing Screwdriver Sets. Together, they can ensure accurate tightening of most every screw on any gun in your collection.

  • Torque adjustments range from 10 inch pounds to 65 inch pounds
  • Accuracy plus/minus 2 inch pounds
  • 1/4″ drive

Plastic Case Included

Bits Included:

  • Leupold/Buehler windage bit
  • #10 flat blade bit
  • #11 flat blade bit
  • #32 flat blade bit
  • 3/32″ Allen bit
  • 7/64″ Allen bit
  • 5/32″ Allen bit
  • T15 Torx bit
  • T20 Torx bit
  • Square drive adapter bit

553556

Out of stock

Out of stock
Wheeler Engineering Universal Barrel Clamp

Wheeler Engineering Universal Barrel Clamp

Made from aircraft grade aluminum and bonded with non-marring urethane, the Wheeler Universal Barrel Clamp is able to accommodate three different barrel openings of .85”, .66” and .53” allowing you to change anything from a pencil AR barrel to a bull barrel. When inserted in a vise the urethane coating squeezes down tightly on the barrel to fully secure it for the forces needed for installation/ removal.

672286

Out of stock

Out of stock

Armorer Tools

Gunsmiths and armorers – time away from the workshop is well spent if you’re shopping our site, because we’ve got the tools to make tasks easier! Start off or expand your collection of armorer tools with a multi-piece armorer’s punch set that includes hammers, as well as steel, brass and delrin punches. Purchase handy pin and roll pin punches in smaller sets. If you’ve got a Glock gun, take a look at the factory armorer’s tool used to disassemble Glock pistols. In addition, we stock an assortment of Glock parts too. A padded bench mat creates the perfect protective place to work on handguns. Once your workspace is covered, use a multipurpose, combination armorer tool for Sig Sauer handguns. It’s got the right screwdriver tips for everything Sig Sauer gunsmiths may need from taking out grip screws to installing a mainspring.

Gunsmithing Tools Equal Repairs Done Right

If you work on guns, you know the right gunsmithing tools make a world of difference! The 1911 versatile tool from Wilson Combat is a gunsmithing tool value; it’s actually an array of tools in one compact unit. Disassemble and assemble a 1911 automatic pistol with this tool. We’ve also got calipers and bits, plus a combination bit set that works on those common grip screws. Safeguard AR-15 rifles while working on them with lower receiver vice blocks and upper receiver action blocks. Keep a multi-use AR-15 tool nearby to assist you. A comprehensive 1911 tool kit supports pistol work that requires pin punch, hex drives and a variety of screwdriver sizes. For rounding out your tool kits, also take a minute to see our sight installation tools.