Sig Sauer P226 Gun Parts

Sig Sauer P226 Gun Parts

Products

Sig Sauer Firing Pin - P239/226/229 Stainless

Sig Sauer Firing Pin - P239/226/229 Stainless

Sig Sauer factory Firing Pin for P239, P226 and P229 stainless steel slide models.

FIRING-PIN-5

In stock

$29.95

Sig Sauer Firing Pin Positioning Pin - Current P Series - SPIRAL

Sig Sauer Firing Pin Positioning Pin - Current P Series - SPIRAL

Sig Sauer factory Firing Pin Retaining Pin for P227, P220, P226, P229, P229. P224 and P239 stainless steel slide models. This is the spiral or coiled pin found on later model pistols. Not for use on older pistols or those that use the solid FPPP or the 2 piece roll pins. For slides with short extractors only.

PIN-12

In stock

$10.99

Sig Sauer Sear Spring Seat Pin - P Series

Sig Sauer Sear Spring Seat Pin - P Series

Sig Sauer factory Sear Spring Seat Pin for P Series pistols.

1201708

In stock

$7.99

SIG Standard Trigger - P226, P228, P229 Black

SIG Standard Trigger - P226, P228, P229 Black

SIG factory Standard Trigger for P226, P228, P229, 227 and recent production P220 with wide (10mm) trigger. A Short Trigger for the P220 SAO is not available.

TRG-22690-BLK

In stock

$39.95

Grayguns Dual Adjustable Curved Trigger - Sig Sauer P-Series - STEEL BLACK

Grayguns Dual Adjustable Curved Trigger - Sig Sauer P-Series - STEEL BLACK

The Grayguns P-Series Dual Adjustable Curved Trigger is the ultimate trigger upgrade for your Legion Series or any modern DA/SA SIG P-Series pistol.

Bruce Gray has combined the adjustable over-travel feature, unbeatable comfort and control and unrivaled quality of our original OEM SIG Sauer® Legion P22xCT, Classic Standard trigger, with the improved geometry and pre-travel adjustment of our wildly popular P22xST Dual Adjustable Straight Trigger series.

This trigger is the ultimate upgrade for your Legion Series or any modern DA/SA SIG P-Series pistol.

Our Dual Adjustable Curved Trigger

This steel trigger is carefully heat treated and finished in black oxide. Tight pin hole tolerances assure smooth, solid function. The trigger is guaranteed for life against defects in materials or workmanship.

Made with love, supplied with a hex key.

Fit Guide

The Dual Adjustable Curved Trigger is designed to fit both current and older model traditional double action (DA/SA/decocker) P-Series pistols, including:

  • X5 All-Round
  • P220 (see exception below)
  • P226
  • P228
  • P229
  • P227, and others.

These triggers are approximately 10mm wide. At this time, we are not suggesting this trigger for guns equipped with the DAK trigger system.

This trigger may not be fully compatible with California compliant or similar P-Series pistol models equipped with a magazine disconnector, and Grayguns urges caution. We do not recommend deactivating any mechanical safety device.

The Grayguns DA/SA triggers will not fit SIG Pro, P225 / P6, P239, West German P220s, or most SAO models. Most of these triggers are a narrower 8mm width.

TRG-SIG-22X-DAC

In stock

$74.00

Sig Sauer Sear Spring Pin - Fits All

Sig Sauer Sear Spring Pin - Fits All

Sig Sauer factory sear spring pin for all classic P series models.

34260710

In stock

$6.95

Grayguns Master Spring Set - Sig Sauer P-Series - NOT P225/P6

Grayguns Master Spring Set - Sig Sauer P-Series - NOT P225/P6

From Grayguns, a Master Spring Set for Sig Sauer P-Series handguns. The P-MSS kit is an action upgrade package designed to reduce trigger pull weight while still providing reliable primer strikes. This set includes two mainsprings, one 17 lb. and one 19 lb., and a competition sear spring.

Fits the modern P-Series handguns with a DA/SA system, P220, P224, P225A1, P226, P227, P228, P229 and P-226 X-Five Allround.

SYS-SIG-22X-MSS

In stock

$16.00

Sig Sauer Support Plate - P220, P225, P226, P228, P229

Sig Sauer Support Plate - P220, P225, P226, P228, P229

Sig Sauer factory Support Plate for all standard P series models except P239.

PLATE-1

In stock

$19.99

Sig Sauer Hammer Strut - P220/226/229 DAK

Sig Sauer Hammer Strut - P220/226/229 DAK

Sig Sauer factory Hammer Strut for P220, P226, and P229 DAK models.

HAMMER-STRUT-1

In stock

$19.99

Grayguns P320 Adjustable Hybrid Trigger - TIN Gold

Grayguns P320 Adjustable Hybrid Trigger - TIN Gold

Bruce Gray combined the best of both worlds when he designed what we know as the hybrid trigger.

The unique face allows the shooter can take advantage of finger placement lower on the face, with the comfort of a traditional curved face. This hybrid design reduces trigger weight while preserving all mechanical safety values.

The Grayguns P320 Hybrid Trigger uses internal leverage changes to yield superior trigger pull, while supporting the voluntary upgrade’s enhanced reliability and rough handling performance qualities.

Includes our adjustable over-travel stop design to shorten reset and take out all gross over-travel. Designed for easy drop-in installation.

Specifically designed for P320s with current fire control unit components, or those who have gone through SIG’s Voluntary Upgrade Program. Designed for demanding duty use, with the toughness to outlast your pistol, our P320 triggers are guaranteed for life.

  • Hybrid face design
  • Preserves factory sear engagement and all mechanical safety values
  • Adjustable over-travel eliminates gross movement after the sear is released and reduces trigger travel to reset
  • Enhanced Leverage geometry reduces pull weight by 30% with stock springs
  • Smoother takeup, sear release and reset sensation
  • Optimal 90⁰ sear release
  • Supports Voluntary Upgrade rough handling characteristics for assurance and reliability
  • Designed for use with the SIG factory trigger bar spring
  • Proven reliable and durable for high-volume professional use
  • Limited lifetime warranty on materials and workmanship

Titanium Nitride (TiN)

A well-proven standard layer type through its balanced properties. The golden titanium nitride layer, abbreviated TiN, indicates the following properties:

  • High hardness and adhesion
  • Good chemical resistance
  • Good temperature resistance in air
  • Relatively low thermal conductivity
  • Attractive, golden color

Fits all variations within the P320 (upgraded) system. Including all sizes, TACOPS Carry, X-VTAC, X-Carry, X-Five and RX versions.

Disclaimer

These parts are intended for installation by a qualified armourer or gunsmith. In some cases professional fitting will be required by a trained, qualified armorer/gunsmith who is very familiar with the pistol’s action. This is due to the varying tolerances present in all mass-produced firearms. Although kits fit with no issues in a great majority of pistols, Grayguns is unable to guarantee perfect functionality in every instance. Grayguns does offer installation services for all parts kits we offer.

TRG-SIG-320-AHT-TIN

In stock

$99.00

Sig Sauer Decocking Lever - P227, P226, P228, P229 PHOSPHATE

Sig Sauer Decocking Lever - P227, P226, P228, P229 PHOSPHATE

Sig Sauer factory Decocking Lever for P227, P226, P228 and P229 models. Phosphate finish.

1200622

In stock

$22.95

Sig Sauer Ejector - P228, P229, P239, P226-40

Sig Sauer Ejector - P228, P229, P239, P226-40

Sig Sauer factory ejector for P224, P228, P229, P239, P226 .40S&W and P226 .357SIG models.

EJECTOR-2

In stock

$21.99

Sig Sauer Hammer Strut - P226, P229 - SHORT REACH

Sig Sauer Hammer Strut - P226, P229 - SHORT REACH

Sig Sauer factory Hammer Strut for P226/P229 models. E2 grip kit hammer strut.

1200465

In stock

$21.95

Sig Sauer Safety Lock - SIGPRO/P227/P220/226/229-9/239/ SS

Sig Sauer Safety Lock - SIGPRO/P227/P220/226/229-9/239/ SS

Sig Sauer factory Safety Lock for P227, P220, P226, P229 9mm, SP2009 9mm, SP2340 .40/357 and P239 models with stainless steel slides. Not for use with carbon steel stamped slide versions.

1202582

In stock

$29.95

Grayguns Enhanced Leverage System ELS - Sig Sauer P Series Hybrid

Grayguns Enhanced Leverage System ELS - Sig Sauer P Series Hybrid

The Grayguns proprietary enhanced leverage geometry reduces pull weight approximately 25 percent without compromising reliability or factory safety values. The trigger is dual-adjustable for pre and over-travel, which is what you’d expect from the Industry Leader, GGI.

Each Grayguns enhanced-geometry trigger bar is micro polished for superior smoothness and perfectly timed function. This is the Hybrid trigger shoe.

The trigger kit is engineered to provide several key benefits:

  • Reduces the pull weight of double and single action without the need for spring replacements.
  • Reduced over-travel
  • Reduced pre-travel
  • Maintains all factory safety functions.

The kit is 100 percent American made from precision machined heat treated tool steel.

100% American made from precision machined heat treated tool steel, then hand finished and treated with tungsten DLC for unlimited service life.

This kit is compatible with P226/229/228 pistols that have the larger DAK-capable frame window cut.

This can only be purchased as a complete system and REQUIRES the trigger AND the trigger bar in order to function.

SYS-SIG-ELS-AHT-DAK

Out of stock

Out of stock
Hogue Grip Screw - P226/P228/P229- BLUE

Hogue Grip Screw - P226/P228/P229- BLUE

Set of (4) Allen Head replacement grip screws for your Sig Sauer P226, P228 or P229 pistols. Uses 3/32" Allen Wrench.

26009

Out of stock

Out of stock
Hogue Grip Screw - P226/P228/P229- STAINLESS

Hogue Grip Screw - P226/P228/P229- STAINLESS

Set of (4) Allen Head replacement grip screws for your Sig Sauer P226, P228 or P229 pistols. Uses 3/32" Allen Wrench.

26019

Out of stock

Out of stock
Sig P226/P224/P227/P228/P229/P220 Short Trigger-BLACK

Sig P226/P224/P227/P228/P229/P220 Short Trigger-BLACK

Factory Black Short Trigger for the Sig P226, P224, P227, P228 and P229 and recent production P220's. A Short Trigger for the P220 SAO is not available. 10mm wide. The SIG SAUER® Short Trigger is for shooters with small hands and was designed to enhance trigger manipulation for better shooting performance. Phosphate.

TRIGGER-7

Out of stock

Out of stock